Johannes Uihlein

Straightforward Generation of Pillared, Microporous Graphene Frameworks for Use in Supercapacitors

Microporous, pillared graphene-based frameworks are generated in a simple functionalization/coupling procedure starting from reduced graphene oxide. They are used for the fabrication of high-performance supercapacitor devices.

Impact of Fe Content in Laboratory - Produced Soot Aerosol on its Composition, Structure, and Thermo-Chemical Properties

Soot aerosol, which is a major pollutant in the atmosphere of urban areas, often contains not only carbonaceous matter but also inorganic material. These species, for example, iron compounds, originated from impurities in fuel or lubricating oil, additives or engine wear may change the physico-chemical characteristics of soot and hence its environmental impact. We studied the change of composition, structure, and oxidation reactivity of laboratory-produced soot aerosol with varying iron content. Soot types of various iron contents were generated in a propane/air diffusion flame by adjusting the doping amount of iron pentacarbonyl Fe(CO)5 to the flame. Scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX) was combined with cluster analysis (CA) to separate individual particles into definable groups of similar chemical composition representing the particle types in dependence of the iron content in soot. Raman microspectroscopy (RM) and infrared spectroscopy were applied for the characterization of the graphitic soot structure, hydrocarbons, and iron species. For the analysis of soot reactivity, temperature-programmed oxidation (TPO) was used. It is demonstrated that iron is most dominantly present in the form of amorphous Fe (III) oxide crystallizing to hematite α-Fe2O3 upon thermal treatment. Iron contaminations do not change the soot microstructure crucially, but Fe(CO)5 doping of the flame impacts hydrocarbon composition. Soot oxidation reactivity strongly depends on the iron content, as the temperature of maximum carbon (di)oxide emission T max follows an exponential decay with increasing iron content in soot. Based on the results of the thermo-chemical characterization of laboratory-produced internally mixed iron-containing soot, we can conclude that iron-containing combustion aerosol samples cannot be characterized unambiguously by current thermo-optical analysis protocols. Copyright 2012 American Association for Aerosol Research

CoPc and CoPcF16 on gold: Site-specific charge-transfer processes

Summary Interface properties of cobalt(II) phthalocyanine (CoPc) and cobalt(II) hexadecafluoro-phthalocyanine (CoPcF16) to gold are investigated by photo-excited electron spectroscopies (X-ray photoemission spectroscopy (XPS), ultraviolet photoemission spectroscopy (UPS) and X-ray excited Auger electron spectroscopy (XAES)). It is shown that a bidirectional charge transfer determines the interface energetics for CoPc and CoPcF16 on Au. Combined XPS and XAES measurements allow for the separation of chemical shifts based on different local charges at the considered atom caused by polarization effects. This facilitates a detailed discussion of energetic shifts of core level spectra. The data allow the discussion of site-specific charge-transfer processes.

Communication: Influence of graphene interlayers on the interaction between cobalt phthalocyanine and Ni(111)

The influence of graphene interlayers on electronic interface properties of cobalt phthalocyanine on Ni(111) is studied using both photoemission and X-ray absorption spectroscopy. A charge transfer associated with a redistribution of the d-electrons at the Co-atom of the phthalocyanine occurs at the interface to Ni(111). Even a graphene buffer layer cannot prevent the charge transfer at the interface to Ni(111); however, the detailed electronic situation is different.

Chloroaluminum phthalocyanine thin films: chemical reaction and molecular orientation

AbstractThe chemical transformation of the polar chloroaluminum phthalocyanine, AlClPc, to μ-(oxo)bis(phthalocyaninato)aluminum(III), (PcAl)2O, in thin films on indium tin oxide is studied and its influence on the molecular orientation is discussed. The studies were conducted using complementary spectroscopic techniques: Raman spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. In addition, density functional theory calculations were performed in order to identify specific vibrations and to monitor the product formation. The thin films of AlClPc were annealed in controlled environmental conditions to obtain (PcAl)2O. It is shown that the chemical transformation in the thin films can proceed only in the presence of water. The influence of the reaction and the annealing on the molecular orientation was studied with Raman spectroscopy and NEXAFS spectroscopy in total electron yield and partial electron yield modes. The comparison of the results obtained from these techniques allows the determination of the molecular orientation of the film as a function of the probing depth. Illustration of the dimerization reaction of MClPc to (PcM)2O.