John E. Kirkwood

Determining the mechanical response of particle-laden fluid interfaces using surface pressure isotherms and bulk pressure measurements of droplets

The mechanical response of particle-laden fluid interfaces is determined by measuring the internal pressures of particle-coated drops as a function of the drop volume. The particle monolayers undergoing compression-expansion cycles exhibit three distinct states: fluid state, jammed state, and buckled state. The P-V curves are compared to the surface pressure isotherms Pi-A that are measured using a Langmuir trough and a Wilhelmy plate on a flat water-decane interface covered with the same particles. We find that in the fluid and jammed states, the water drop in decane can be described by the Young-Laplace equation. Therefore in these relatively low compression states, the bulk pressure measurements can be used to deduce the interfacial tension of the droplets and yield similar surface pressure isotherms to the ones measured with the Wilhelmy plate. In the buckled state, the internal pressure of the drop yields a zero value, which is consistent with the zero interfacial tension measured with the Wilhelmy plate. Moreover we find that the compressibility in the jammed state does not depend on the particle size.

Surface Rheology of Hydrophobically Modified PEG Polymers Associating with a Phospholipid Monolayer at the Air-Water Interface

Surface rheology of irreversibly bound hydrophobically modified poly(ethylene glycol) (PEG) polymers (HMPEG) on a dipalmitoylphosphatidylcholine (DPPC) monolayer is investigated to determine attributes that may contribute to immune recognition. Previously, three comb-graft polymers (HMPEG136-DP3, HMPEG273-DP2.5, and HMPEG273-DP5) adsorbed on liposomes were examined for their strength of adsorption and protection from complement binding. The data supported an optimal ratio between the hydrophilicity of the PEG polymer and the number of hydrophobic anchors. The HMPEG polymers have different polymer brush thicknesses (4.2-5.9 nm) and levels of cooperativity (2.5-5 hydrophobes). The results indicate that an increased viscous force (above 0.25 mN s/m) at the surface may enable the polymers to shield liposomes from protein interactions. Similar rheological behavior is shown for all polymer architectures at low polymer surface coverage (0.5 mg/m2, in the mushroom regime), whereas at high surface coverage (>0.5 mg/m2, in the brush regime), we observe a structural dependence of the surface viscous forces at 40 mN/m. This threshold correlates with a 92% decrease in complement protein binding for liposomes coated with 1 mg/m2 HMPEG273-DP5. This may suggest that surface viscous forces play a role in reducing complement protein binding.

Charge interaction between particle-laden fluid interfaces.

Experiments are described where two oil/water interfaces laden with charged particles move at close proximity relative to one another. The particles on one of the interfaces were observed to be attracted toward the point of closest approach, forming a denser particle monolayer, while the particles on the opposite interface were repelled away from this point, forming a particle depletion zone. Such particle attraction/repulsion was observed even if one of the interfaces was free of particles. This phenomenon can be explained by the electrostatic interaction between the two interfaces, which causes surface charges (charged particles and ions) to redistribute in order to satisfy surface electric equipotential at each interface. In a forced particle oscillation experiment, we demonstrated the control of charged particle positions on the interface by manipulating charge interaction between interfaces.

Oriented collagen as a potential cochlear implant electrode surface coating to achieve directed neurite outgrowth

In patients with severe to profound hearing loss, cochlear implants (CIs) are currently the only therapeutic option when the amplification with conventional hearing aids does no longer lead to a useful hearing experience. Despite its great success, there are patients in which benefit from these devices is rather limited. One reason may be a poor neuron-device interaction, where the electric fields generated by the electrode array excite a wide range of tonotopically organized spiral ganglion neurons at the cost of spatial resolution. Coating of CI electrodes to provide a welcoming environment combined with suitable surface chemistry (e.g. with neurotrophic factors) has been suggested to create a closer bioelectrical interface between the electrode array and the target tissue, which might lead to better spatial resolution, better frequency discrimination, and ultimately may improve speech perception in patients. Here we investigate the use of a collagen surface with a cholesteric banding structure, whose orientation can be systemically controlled as a guiding structure for neurite outgrowth. We demonstrate that spiral ganglion neurons survive on collagen-coated surfaces and display a directed neurite growth influenced by the direction of collagen fibril deposition. The majority of neurites grow parallel to the orientation direction of the collagen. We suggest collagen coating as a possible future option in CI technology to direct neurite outgrowth and improve hearing results for affected patients.