John M. Szymanski

Conformal Nanopatterning of Extracellular Matrix Proteins onto Topographically Complex Surfaces

Our Patterning on Topography (PoT) printing technique enables fibronectin, laminin and other proteins to be applied to biomaterial surfaces in complex geometries that are inaccessible using traditional soft lithography techniques. Engineering combinatorial surfaces that integrate topographical and biochemical micropatterns enhances control of the biotic-abiotic interface. Here, we used this method to understand cardiomyocyte response to competing physical and chemical cues in the microenvironment.

Fabrication of freestanding alginate microfibers and microstructures for tissue engineering applications.

Natural biopolymers such as alginate have become important materials for a variety of biotechnology applications including drug delivery, cell encapsulation and tissue engineering. This expanding use has spurred the development of new approaches to engineer these materials at the nano- and microscales to better control cell interactions. Here we describe a method to fabricate freestanding alginate-based microfibers and microstructures with tunable geometries down to approximately 3 µm. To do this, a polydimethylsiloxane stamp is used to micromold alginate or alginate-fibrin blends onto a sacrificial layer of thermally-sensitive poly(N-isopropylacrylamide) (PIPAAm). A warm calcium chloride solution is then used to crosslink the alginate and, upon cooling below the lower critical solution temperature (~32 °C), the PIPAAm layer dissolves and releases the alginate or alginate-fibrin as freestanding microfibers and microstructures. Proof-of-concept experiments demonstrate that C2C12 myoblasts seeded onto the alginate-fibrin microfibers polarize along the fiber length forming interconnected cell strands. Thus, we have developed the ability to engineer alginate-based microstructured materials that can selectively bind cells and direct cellular assembly.

ECM Protein Nanofibers and Nanostructures Engineered Using Surface-initiated Assembly

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber diameter, composition and organization. In addition to providing structural support, the physical and chemical properties of the ECM play an important role in multiple cellular processes including adhesion, differentiation, and apoptosis. In vivo, the ECM is assembled by exposing cryptic self-assembly (fibrillogenesis) sites within proteins. This process varies for different proteins, but fibronectin (FN) fibrillogenesis is well-characterized and serves as a model system for cell-mediated ECM assembly. Specifically, cells use integrin receptors on the cell membrane to bind FN dimers and actomyosin-generated contractile forces to unfold and expose binding sites for assembly into insoluble fibers. This receptor-mediated process enables cells to assemble and organize the ECM from the cellular to tissue scales. Here, we present a method termed surface-initiated assembly (SIA), which recapitulates cell-mediated matrix assembly using protein-surface interactions to unfold ECM proteins and assemble them into insoluble fibers. First, ECM proteins are adsorbed onto a hydrophobic polydimethylsiloxane (PDMS) surface where they partially denature (unfold) and expose cryptic binding domains. The unfolded proteins are then transferred in well-defined micro- and nanopatterns through microcontact printing onto a thermally responsive poly(N-isopropylacrylamide) (PIPAAm) surface. Thermally-triggered dissolution of the PIPAAm leads to final assembly and release of insoluble ECM protein nanofibers and nanostructures with well-defined geometries. Complex architectures are possible by engineering defined patterns on the PDMS stamps used for microcontact printing. In addition to FN, the SIA process can be used with laminin, fibrinogen and collagens type I and IV to create multi-component ECM nanostructures. Thus, SIA can be used to engineer ECM protein-based materials with precise control over the protein composition, fiber geometry and scaffold architecture in order to recapitulate the structure and composition of the ECM in vivo.

Spontaneous helical structure formation in laminin nanofibers

Laminin is a cross-shaped heterotrimer composed of three polypeptides chains that assembles into an insoluble extracellular matrix (ECM) network as part of the basement membrane, serving a vital role in many processes such as embryonic development, differentiation, and muscle and nerve regeneration. Here we engineered monodisperse laminin nanofibers using a surface-initiated assembly technique in order to investigate how changes in protein composition affect formation and structure of the network. Specifically, we compared laminin 111 with varying degrees of purity and with and without entactin to determine whether these changes alter biophysical properties. All the laminin types were reproducibly patterned as 200 μm long, 20 μm wide nanofibers that were successfuly released during surface-initiated assembly into solution. All nanofibers contracted upon release, and while initial lengths were identical, lengths of released fibers depended on the laminin type. Uniquely, the laminin 111 at high purity (>95%) and without entactin spontaneouly formed helical nanofibers at greater than 90%. Atomic force microscopy revealed that the nanofiber contraction was associated with a change in nanostructure from fibrillar to nodular, suggestive of refolding of laminin molecules into a globular-like conformation. Further, for the high purity laminin that formed helices, the density of the laminin at the edges of the nanofiber was higher than in the middle, providing a possible origin for the differential pre-stress driving the helix formation. Together, these results show that variation in the purity of laminin 111 and presence of entactin can have significant impact on the biophysical properties of the assembled protein networks. This highlights the fact that our understanding of protein assembly and function is still incomplete and that cell-free, in vitro assays can provide unique insights into the ECM.

Measuring the Poisson’s Ratio of Fibronectin Using Engineered Nanofibers

The extracellular matrix (ECM) is a fibrillar protein-based network, the physical and chemical properties of which can influence a multitude of cellular processes. Despite having an important role in cell and tissue signaling, a complete chemo-mechanical characterization of ECM proteins such as fibronectin (FN) is lacking. In this study, we engineered monodisperse FN nanofibers using a surface-initiated assembly technique in order to provide new insight into the elastic behavior of this material over large deformations. FN nanofibers were patterned on surfaces in a pre-stressed state and when released from the surface underwent rapid contraction. We found that the FN nanofibers underwent 3.3-fold and 9-fold changes in length and width, respectively, and that the nanofiber volume was conserved. Volume was also conserved following uniaxial extension of the FN nanofibers of ~2-fold relative to the patterned state. This data suggests that the FN networks we engineered formed an incompressible material with a Poisson’s ratio of ~0.5. While the Poisson’s ratio of cells and other biological materials are widely estimated as 0.5, our experimental results demonstrate that for FN networks this is a reasonable approximation.

Patterning on Topography for Generation of Cell Culture Substrates with Independent Nanoscale Control of Chemical and Topographical Extracellular Matrix Cues

The cell microenvironment plays an important role in many biological processes, including development and disease progression. Key to this is the extracellular matrix (ECM), a complex biopolymer network serving as the primary insoluble signaling network for physical, chemical, and mechanical cues. In vitro, the ability to engineer the ECM at the micro‐ and nanoscales is a critical tool to systematically interrogate the influence of ECM properties on cellular responses. Specifically, both topographical and chemical surface patterning has been shown to direct cell alignment and tissue architecture on biomaterial surfaces, however, it has proven challenging to independently control these surface properties. This protocol describes a method termed Patterning on Topography (PoT) to engineer 2D nanopatterns of ECM proteins onto topographically complex substrates, which enables independent control of physical and chemical surface properties. Applications include interrogation of fundamental cell‐surface interactions and engineering interfaces that can direct cell and/or tissue function.