John P. S. Mowat

Extending the Pore Size of Crystalline Metal Phosphonates toward the Mesoporous Regime by Isoreticular Synthesis

Crystalline microporous cobalt and nickel bisphosphonates with a hexagonal array of one-dimensional channels 1.8 nm in diameter have been prepared hydrothermally and provide the first example of the use of isoreticular chemistry in the synthesis of phosphonate metal-organic frameworks. The materials contain both physisorbed and coordinating water molecules in the as-prepared form, but these can be removed to give permanent extra-large microporosity, with pore volumes of up to 0.68 cm(3) g(-1), and coordinatively unsaturated sites, with concentrations up to 4.25 mmol g(-1).

Elucidating the Breathing of the Metal–Organic Framework MIL-53(Sc) with ab Initio Molecular Dynamics Simulations and in Situ X-ray Powder Diffraction Experiments

Ab initio molecular dynamics (AIMD) simulations have been used to predict structural transitions of the breathing metal-organic framework (MOF) MIL-53(Sc) in response to changes in temperature over the range 100-623 K and adsorption of CO2 at 0-0.9 bar at 196 K. The method has for the first time been shown to predict successfully both temperature-dependent structural changes and the structural response to variable sorbate uptake of a flexible MOF. AIMD employing dispersion-corrected density functional theory accurately simulated the experimentally observed closure of MIL-53(Sc) upon solvent removal and the transition of the empty MOF from the closed-pore phase to the very-narrow-pore phase (symmetry change from P2(1)/c to C2/c) with increasing temperature, indicating that it can directly take into account entropic as well as enthalpic effects. We also used AIMD simulations to mimic the CO2 adsorption of MIL-53(Sc) in silico by allowing the MIL-53(Sc) framework to evolve freely in response to CO2 loadings corresponding to the two steps in the experimental adsorption isotherm. The resulting structures enabled the structure determination of the two CO2-containing intermediate and large-pore phases observed by experimental synchrotron X-ray diffraction studies with increasing CO2 pressure; this would not have been possible for the intermediate structure via conventional methods because of diffraction peak broadening. Furthermore, the strong and anisotropic peak broadening observed for the intermediate structure could be explained in terms of fluctuations of the framework predicted by the AIMD simulations. Fundamental insights from the molecular-level interactions further revealed the origin of the breathing of MIL-53(Sc) upon temperature variation and CO2 adsorption. These simulations illustrate the power of the AIMD method for the prediction and understanding of the behavior of flexible microporous solids.

Remarkable Lewis acid catalytic performance of the scandium trimesate metal organic framework MIL-100(Sc) for C–C and CN bond-forming reactions

The porous metal organic frameworks scandium trimesate MIL-100(Sc), scandium terephthalates MIL-101(Sc), MIL-88B(Sc) and MIL-68(Sc), scandium 4,4′-biphenyl-dicarboxylate MIL-88D(Sc) and the scandium 3,3′,5,5-azobenzene-tetracarboxylate socMOF(Sc) have been compared as Lewis acid catalysts against Sc3+-exchanged zeolite Beta, MIL-100(Cr), MIL-101(Cr), MIL-100(Fe) and the divalent MOFs HKUST-1(Cu), CPO-27(Ni) and STA-12(Ni), each of which can be prepared with coordinatively unsaturated metal sites. The performance of these MOFs has been investigated in several Lewis acid-catalysed reactions that are of importance in organic synthesis but have rarely been studied using MOF catalysts. These reactions were (i) the intermolecular carbonyl ene reaction of nucleophilic alkenes and electron-poor aldehydes, (ii) a Friedel–Crafts type Michael addition between electron-rich heterocycles and electron-deficient alkenes and (iii) ketimine and aldimine formation. In each of these, MIL-100(Sc) is both active and selective and significantly outperforms the other catalysts. Filtration and recycle tests indicate that catalysis over MIL-100(Sc) is heterogeneous. The study of Michael addition reactions carried out over scandium-bearing MOFs with different window sizes on indole-based substrates of varying molecular dimensions indicates that most of the catalysis that involves molecules small enough to enter the pores occurs within the internal pore space. These results indicate MIL-100(Sc) is an exceptional Lewis acidic MOF catalyst, and suggest that MIL-100(Sc) and new derivatives of it could find application as recyclable solid catalysts in synthetic chemistry.

Structural Chemistry, Monoclinic-to-Orthorhombic Phase Transition, and CO2 Adsorption Behavior of the Small Pore Scandium Terephthalate, Sc2(O2CC6H4CO2)3, and Its Nitro- And Amino-Functionalized Derivatives

The crystal structure of the small pore scandium terephthalate Sc(2)(O(2)CC(6)H(4)CO(2))(3) (hereafter Sc(2)BDC(3), BDC = 1,4-benzenedicarboxylate) has been investigated as a function of temperature and of functionalization, and its performance as an adsorbent for CO(2) has been examined. The structure of Sc(2)BDC(3) has been followed in vacuo over the temperature range 140 to 523 K by high resolution synchrotron X-ray powder diffraction, revealing a phase change at 225 K from monoclinic C2/c (low temperature) to Fddd (high temperature). The orthorhombic form shows negative thermal expansivity of 2.4 × 10(-5) K(-1): Rietveld analysis shows that this results largely from a decrease in the c axis, which is caused by carboxylate group rotation. (2)H wide-line and MAS NMR of deuterated Sc(2)BDC(3) indicates reorientation of phenyl groups via π flips at temperatures above 298 K. The same framework solid has also been prepared using monofunctionalized terephthalate linkers containing -NH(2) and -NO(2) groups. The structure of Sc(2)(NH(2)-BDC)(3) has been determined by Rietveld analysis of synchrotron powder diffraction at 100 and 298 K and found to be orthorhombic at both temperatures, whereas the structure of Sc(2)(NO(2)-BDC)(3) has been determined by single crystal diffraction at 298 K and Rietveld analysis of synchrotron powder diffraction at 100, 298, 373, and 473 K and is found to be monoclinic at all temperatures. Partial ordering of functional groups is observed in each structure. CO(2) adsorption at 196 and 273 K indicates that whereas Sc(2)BDC(3) has the largest capacity, Sc(2)(NH(2)-BDC)(3) shows the highest uptake at low partial pressure because of strong -NH(2)···CO(2) interactions. Remarkably, Sc(2)(NO(2)-BDC)(3) adsorbs 2.6 mmol CO(2) g(-1) at 196 K (P/P(0) = 0.5), suggesting that the -NO(2) groups are able to rotate to allow CO(2) molecules to diffuse along the narrow channels.

Stabilization of Scandium Terephthalate MOFs against Reversible Amorphization and Structural Phase Transition by Guest Uptake at Extreme Pressure

Previous high-pressure experiments have shown that pressure-transmitting fluids composed of small molecules can be forced inside the pores of metal organic framework materials, where they can cause phase transitions and amorphization and can even induce porosity in conventionally nonporous materials. Here we report a combined high-pressure diffraction and computational study of the structural response to methanol uptake at high pressure on a scandium terephthalate MOF (Sc2BDC3, BDC = 1,4-benzenedicarboxylate) and its nitro-functionalized derivative (Sc2(NO2-BDC)3) and compare it to direct compression behavior in a nonpenetrative hydrostatic fluid, Fluorinert-77. In Fluorinert-77, Sc2BDC3 displays amorphization above 0.1 GPa, reversible upon pressure release, whereas Sc2(NO2-BDC)3 undergoes a phase transition (C2/c to Fdd2) to a denser but topologically identical polymorph. In the presence of methanol, the reversible amorphization of Sc2BDC3 and the displacive phase transition of the nitro-form are completely inhibited (at least up to 3 GPa). Upon uptake of methanol on Sc2BDC3, the methanol molecules are found by diffraction to occupy two sites, with preferential relative filling of one site compared to the other: grand canonical Monte Carlo simulations support these experimental observations, and molecular dynamics simulations reveal the likely orientations of the methanol molecules, which are controlled at least in part by H-bonding interactions between guests. As well as revealing the atomistic origin of the stabilization of these MOFs against nonpenetrative hydrostatic fluids at high pressure, this study demonstrates a novel high-pressure approach to study adsorption within a porous framework as a function of increasing guest content, and so to determine the most energetically favorable adsorption sites.

Synthetic control of framework zinc purinate crystallisation and properties of a large pore, decorated, mixed-linker RHO-type ZIF

A novel form of mixed-linker ZIF with the RHO topology is one of four zinc-imidazolate frameworks prepared with purine and 2-nitroimidazole. In this structure the linkers order to give a large pore solid with a high pore volume and an unusual symmetry and linker orientation. It possesses extra-framework zinc imidazolate units decorating the internal surface which can be removed to give high porosity.

Perfluorocarbon liquid under pressure: a medium for gas delivery

A novel method for CO2 delivery to a porous material is reported, wherein a perfluorocarbon containing dissolved CO2 has been used as a pressure-transmitting liquid in a high-pressure single-crystal X-ray diffraction experiment. Pressure causes the gas to be squeezed out of the liquid into the host crystal, monitored via a single-crystal to single-crystal phase transition on uptake of CO2.

A combined high-pressure diffraction and computational study on scandium MOFs

Previous high-pressure experiments have shown that pressure-transmitting fluids composed of small molecules can be forced inside the pores of metal organic framework materials, where they can cause phase transitions and amorphization and can even induce porosity in conventionally non-porous materials.1 Here we present a combined high-pressure diffraction and computational study of the structural response to methanol uptake at high pressure on a scandium terephthalate MOF (Sc2BDC3, BDC=1,4benzenedicarboxylate)2 and its nitro-functionalized derivative (Sc2(NO2-BDC)3)3 and compare it to direct compression behaviour in a non-penetrative hydrostatic fluid, Fluorinert-77. In Fluorinert-77, Sc2BDC3 displays amorphization above 0.1 GPa, reversible upon pressure release, whereas Sc2(NO2-BDC)3 undergoes a phase transition (C2/c to Fdd2) to a denser but topologically-identical polymorph. In the presence of methanol, the reversible amorphization of Sc2BDC3 and the displacive phase transition of the nitroform are completely inhibited (at least up to 3 GPa). Upon uptake of methanol on Sc2BDC3, the methanol molecules are found by diffraction to occupy two sites, with preferential relative filling of one site compared to the other: grand canonical Monte Carlo simulations support these experimental observations and molecular dynamics simulations reveal the likely orientations of the methanol molecules, which are controlled at least in part by H-bonding interactions between guests. As well as revealing the atomistic origin of the stabilization of these MOFs against non-penetrative hydrostatic fluids at high pressure this study demonstrates a novel high pressure approach to study adsorption within a porous framework as a function of increasing guest content, and so to determine the most energetically favourable adsorption sites.

In-situ Gas Adsorption SC-XRD Study: Understanding Gas Uptake in a Sc-based MOF

In recent years the development of new methods of storing, trapping or separating light gases, such as CO2, CH4 and CO has become of utmost importance from an environmental and energetic point of view. Porous materials such as zeolites and porous organic polymers have long been considered good candidates for this purpose. More recently, the ample spectrum of existing metal organic frameworks (MOFs) together with their functional and mechanical properties have attracted even further interest. The porous channels found in these materials are ideal for the uptake of guests of different shapes and sizes, and with careful design they can show high selectivity. Adsorption properties of MOFs have been thoroughly studied, however obtaining in depth structural insight into the adsorption/desorption mechanism of these materials is challenging. For example, out of the hundreds of MOF structures published to date, there are less than 20 entries currently in the CSD in which the CO2 molecule can be located. Here we present our novel findings using the high-pressure gas cell at the Diamond Light Source on beamline I19, where we have studied the inclusion of CO2, CH4 and CO on the microporous scandium framework, Sc2BDC3 (BDC = benzene-1,4-dicarboxylate) and its amino-functionalised derivative, Sc2(BDC-NH2)3. Here, the different adsorption sites for CO2, CH4 and CO in both frameworks have been determined as a function of increasing gas pressure. These structures, coupled with Density Functional Theory calculations, have helped to elucidate the host-guest interactions governing the different levels of selectivity shown by both Sc2BDC3 and Sc2(BDC-NH2)3. Additionally, gas mixtures have also been studied; in particular CO2/CH4 mixtures of different compositions, explaining the selectivity of the frameworks for CO2 over other gases and showing the great potential of in situ structural experiments for investigation of the potential applications of MOFs.