John R. Lawrence

Assessment of lectin-binding analysis for in situ detection of glycoconjugates in biofilm systems.

An assessment of lectin-binding analysis for the characterization of extracellular glycoconjugates as part of the extracellular polymeric substances in environmental microbial communities was performed using fully hydrated river biofilms. The applicability of the method was evaluated for single, dual and triple staining with a panel of fluor-conjugated lectins. It was shown that lectin-binding analysis was able to stain glycoconjugates within biofilm communities. Lectin staining also demonstrated spatial heterogeneity within the biofilm matrix. Furthermore, the application of two or even three lectins was possible if suitable combinations were selected. The lectin-binding analysis can be combined with general nucleic acid stains to collect both nucleic acid and glycoconjugate signals. The effects of incubation time, lectin concentration, fluor labelling, carbohydrate inhibition, order of addition and lectin interactions were studied. An incubation time of 20 min was found to be sufficient for completion of lectin binding. It was not possible to ascertain saturating concentration for individual lectins, therefore a standard concentration was used for the assay. Carbohydrate inhibition tests indicated that fluorescein isothiocyanate (FITC)-conjugated lectins had more specific binding characteristics than tetramethyl rhodamine isothiocyanate (TRITC)- or cyanine dye (CY5)-labelled lectins. The order of addition and the nature of the fluor conjugate were also found to influence the binding pattern of the lectins. Therefore the selection of a panel of lectins for investigating the EPS matrix must be based on a full evaluation of their behaviour in the biofilm system to be studied. Despite this necessity, lectin-binding analysis represents a valuable tool to examine the glycoconjugate distribution in fully hydrated biofilms. Thereby, chemical heterogeneities within extracellular biofilm locations can be identified in order to examine the role (e.g. sorption properties, microenvironments, cell-extracellular polymeric substance interactions) of the extracellular polymeric substances in environmental biofilm systems.

Selective degradation of ibuprofen and clofibric acid in two model river biofilm systems

A field survey indicated that the Elbe and Saale Rivers were contaminated with both clofibric acid and ibuprofen. In Elbe River water we could detect the metabolite hydroxy-ibuprofen. Analyses of the city of Saskatoon sewage effluent discharged to the South Saskatchewan river detected clofibric acid but neither ibuprofen nor any metabolite. Laboratory studies indicated that the pharmaceutical ibuprofen was readily degraded in a river biofilm reactor. Two metabolites were detected and identified as hydroxy- and carboxy-ibuprofen. Both metabolites were observed to degrade in the biofilm reactors. However, in human metabolism the metabolite carboxy-ibuprofen appears and degrades second whereas the opposite occurs in biofilm systems. In biofilms the pharmacologically inactive stereoisomere of ibuprofen is degraded predominantly. In contrast, clofibric acid was not biologically degraded during the experimental period of 21 days. Similar results were obtained using biofilms developed using waters from either the South Saskatchewan or Elbe River. In a sterile reactor no losses of ibuprofen were observed. These results suggested that abiotic losses and adsorption played only a minimal role in the fate of the pharmaceuticals in the river biofilm reactors.

Phylogenetic Composition, Spatial Structure, and Dynamics of Lotic Bacterial Biofilms Investigated by Fluorescent in Situ Hybridization and Confocal Laser Scanning Microscopy

A bstractThe phylogenetic composition, three-dimensional structure and dynamics of bacterial communities in river biofilms generated in a rotating annular reactor system were studied by fluorescent in situ hybridization (FISH) and confocal laser scanning microscopy (CLSM). Biofilms grew on independently removable polycarbonate slides exposed in the reactor system with natural river water as inoculum and sole nutrient and carbon source. The microbial biofilm community developed from attached single cells and distinct microcolonies via a more confluent structure characterized by various filamentous bacteria to a mature biofilm rich in polymeric material with fewer cells on a per-area basis after 56 days. During the different stages of biofilm development, characteristic microcolonies and cell morphotypes could be identified as typical features of the investigated lotic biofilms. In situ analysis using a comprehensive suite of rRNA-targeted probes visualized individual cells within the alpha-, beta-, and gamma-Proteobacteria as well as the Cytophaga–Flavobacterium group as major parts of the attached community. The relative abundance of these major groups was determined by using digital image analysis to measure specific cell numbers as well as specific cell area after in situ probing. Within the lotic biofilm community, 87% of the whole bacterial cell area and 79% of the total cell counts hybridized with a Bacteria specific probe. During initial biofilm development, beta-Proteobacteria dominated the bacterial population. This was followed by a rapid increase of alpha-Proteobacteria and bacteria affiliated to the Cytophaga–Flavobacterium group. In mature biofilms, alpha-Proteobacteria and Cytophaga–Flavobacteria continued to be the prevalent bacterial groups. Beta-Proteobacteria constituted the morphologically most diverse group within the biofilm communities, and more narrow phylogenetic staining revealed the importance of distinct phylotypes within the beta1-Proteobacteria for the composition of the microbial community. The presence of sulfate-reducing bacteria affiliated to the Desulfovibrionaceae and Desulfobacteriaceae confirmed the range of metabolic potential within the lotic biofilms.

Application of multiple parameter imaging for the quantification of algal, bacterial and exopolymer components of microbial biofilms

Abstract Techniques are required for the simultaneous or sequential determination of multiple parameters within microbial biofilms. Confocal scanning laser microscopy in combination with a range of fluorescent probes and markers offers an approach to quantitatively defining many aspects of biofilm communities. By applying multispectral imaging in conjunction with nucleic acid stains, fluor conjugated lectins, and autofluorescence we have developed a simple approach to evaluate biofilm community composition. Biofilms were treated with the fluorescent nucleic acid stain SYTO 9 to allow quantification of bacterial biomass and fluor conjugated lectins (i.e., Triticum vulgaris lectin) to identify and allow quantification of exopolymeric substances. Far red autofluorescence was imaged to quantify algal biomass. Digital image analysis of the CSLM optical thin sections in each of the channels was used to determine such parameters as biofilm depth, bacterial cell area (biomass), exopolymer area and algal biomass at various depths and locations. In addition, three colour red–green–blue projections of the biofilms were computed. The method proved simple and effective for determining treatment effects such as grazing by invertebrates.

Microscale Evaluation of the Effects of Grazing by Invertebrates with Contrasting Feeding Modes on River Biofilm Architecture and Composition

River biofilms are a valuable food resource for many invertebrates. In the present study biofilms were cultivated in a rotating annular bioreactor with river water as sole source of inoculum. The resulting biofilms were then presented to starved snails, ostracods, and mayflies as sole food source. The biofilms were then removed and microscopically examined to determine areas that had been grazed. The grazed and ungrazed areas were marked and analyzed for the effects of grazing using confocal laser scanning microscopy and image analyses. Samples were treated with fluorescent probes for nucleic acids to quantify bacterial biomass and fluor-conjugated lectins to quantify exopolymer, and far red autofluorescence was imaged to quantify algal or photosynthetic biomass. Grazing by snails significantly reduced algal biomass (1.1 ± 0.6 mm3 mm?2 to 0.02 ± 0.04 mm3 mm?2), exopolymer (5.3 ± 3.4 mm3 mm?2 to 0.18 ± 0.18 mm3 mm?2), and biofilm thickness (154 mm ± 50 to 11 mm ± 5.2; ANOVA, p ? 0.05). Although bacterial biomass was influenced by grazing snails the impact was not statistically significant (p ? 0.05). Ostracods had a significant (p ? 0.05) impact on the algal biomass and exopolymer but not on bacteria. Mayfly grazing resulted in reduction of biofilm thickness to approximately 40 mm and reductions in all biofilm components with little evidence of selectivity. Thus grazing consistently resulted in a significant reduction in autotrophic biomass and exopolymer with a resultant increased importance of bacterial biomass within the grazed regions. Examination of grazed biofilms after a recovery period in the absence of grazing indicated that grazed regions remained predominantly bacterial after 28 days. A comparison of grazing in diclofop methyl and atrazine contaminated (1 ppb and 10 ppb) versus control biofilms indicated no significant influence of the contaminants on grazing patterns.

A simple rotating annular reactor for replicated biofilm studies

The performance of two types of rotating annular reactors for the cultivation of river biofilms was compared qualitatively and quantitatively. One reactor was a commercially available system with a rotating inner solid cylinder and polycarbonate slides in the outer fixed cylinder. The other, a non-commercial system manufactured in the laboratory, had the polycarbonate slides positioned on a machined, rotating inner cylinder. Microscale comparison of the biofilms was carried out using confocal laser scanning microscopy techniques including, fluorescent nucleic acid staining, fluor conjugated lectins and autofluorescence imaging. The results obtained indicated that the reactors were similar in terms of biofilm development pattern, thickness, bacterial biomass, and exopolymer production. Significant differences were found in terms of photosynthetic biomass with the glass bodied non-commercial reactor providing more favourable conditions for algal growth than the opaque polycarbonate outer cylinder of the commercial reactor. The study indicated that a simple inexpensive reactor constructed from available components and materials, produced river biofilms similar to those obtained using a commercial system but at substantially lower cost. The availability of such inexpensive annular reactors should facilitate much needed replicated studies of biofilm development.

Soft X-ray spectromicroscopy of nickel sorption in a natural river biofilm

Scanning transmission X-ray microscopy (STXM) at the C 1s, O 1s, Ni 2p, Ca 2p, Mn 2p, Fe 2p, Mg 1s, Al 1s and Si 1s edges was used to study Ni sorption in a complex natural river biofilm. The 10-week grown river biofilm was exposed to 10 mg L(-1) Ni(2+) (as NiCl(2)) for 24 h. The region of the biofilm examined was dominated by filamentous structures, which were interpreted as the discarded sheaths of filamentous bacteria, as well as a sparse distribution of rod-shaped bacteria. The region also contained discrete particles with spectra similar to those of muscovite, SiO(2) and CaCO(3). The Ni(II) ions were selectively adsorbed by the sheaths of the filamentous bacteria. The sheaths were observed to be metal rich with significant amounts of Ca, Fe and Mn, along with the Ni. In addition, the sheaths had a large silicate content but little organic material. The metal content of the rod-shaped bacterial cells was much lower. The Fe on the sheath was mainly in the Fe(III) oxidation state. Mn was found in II, III and IV oxidation states. The Ni was likely sorbed to Mn-Fe minerals on the sheath. These STXM results have probed nano-scale biogeochemistry associated with bacterial species in a complex, natural biofilm community. They have implications for selective Ni contamination of the food chain and for developing bioremediation strategies.

Semi-quantitative determination of fulvic acid, tannin and lignin in natural waters

Abstract A simple analytical procedure is described for the simultaneous, semiquantitative determination of fulvic acid, tannin and lignin by ultraviolet spectrophotometry. The absorbance is measured at three different wavelengths and the concentrations are calculated using an expanded form of Beers Law. The accuracy of the method is

In Situ Characterization of Extracellular Polymeric Substances (EPS) in Biofilm Systems

Historically, microbial polysaccharides were studied for three reasons. First, polysaccharides represent a structural feature of the microbial cell; therefore they were investigated for pure and basic research interests. Second, polysaccharides were recognized as antigen determinants of the microbial cell surface; the knowledge of their structure was and still is of great importance in medical microbiology. Third, microbial polysaccharides were recognized as a source of polymers with unique properties. These applied aspects of polysaccharides were a reason to study their structure, properties, and production on the pilot and industrial scales.

Stable Bacillus thuringiensis (Bt) toxin content in interspecific F1 and backcross populations of wild Brassica rapa after Bt gene transfer

Stable expression of a transgene may lead to increased fitness for wild plants after acquiring the transgene via crop–weed hybridization. Here, we investigate the stability of Bt toxin content in wild Brassica rapa acquiring the Bt gene from Bt Brassica napus. The Bt toxin content in nine Bt‐expressing B. napus lines was 0.80–1.70 µg/g leaf tissue throughout the growing season. These nine lines were crossed with three accessions of wild B. rapa and the Bt gene was successfully transferred to interspecific hybrids (F1) and successive backcross generations (BC1 to BC4). The Bt toxin level in F1 and BC progenies containing the Bt gene remained at 0.90–3.10 µg/g leaf tissue. This study indicates that the Bt gene can persist and be stably expressed in wild B. rapa.