Jolanda J. Wentzel

Lipid Lowering by Simvastatin Induces Regression of Human Atherosclerotic Lesions Two Years’ Follow-Up by High-Resolution Noninvasive Magnetic Resonance Imaging

Background—Statins are widely used to treat hypercholesterolemia and atherosclerotic disease. Noninvasive MRI allows serial monitoring of atherosclerotic plaque size changes. Our aim was to investigate the effects of lipid lowering with simvastatin on atherosclerotic lesions. Methods and Results—A total of 44 aortic and 32 carotid artery plaques were detected in 21 asymptomatic hypercholesterolemic patients at baseline. The effects of statin on these atherosclerotic lesions were evaluated as changes versus baseline in lumen area (LA), vessel wall thickness (VWT), and vessel wall area (VWA) by MRI. Maximal reduction of plasma total and LDL cholesterol by simvastatin (23% and 38% respectively;P <0.01 versus baseline) was achieved after ≈6 weeks of therapy and maintained thereafter throughout the study. Significant (P <0.01) reductions in maximal VWT and VWA at 12 months (10% and 11% for aortic and 8% and 11% for carotid plaques, respectively), without changes in LA, have been reported. Further decreases in VWT and VWA ranging from 12% to 20% were observed at 18 and 24 months. A slight but significant increase (ranging from 4% to 6%) in LA was seen in both carotid and aortic lesions at these later time points. Conclusion—The present study demonstrates that maintained lipid-lowering therapy with simvastatin is associated with significant regression of established atherosclerotic lesions in humans. Our observations indicate that lipid-lowering therapy is associated with sustained vascular remodeling and emphasize the need for longer-term treatment.

Relationship Between Neointimal Thickness and Shear Stress After Wallstent Implantation in Human Coronary Arteries

BackgroundIn-stent restenosis by excessive intimal hyperplasia reduces the long-term clinical efficacy of coronary stents. Because shear stress (SS) is related to plaque growth in atherosclerosis, we investigated whether variations in SS distribution are related to variations in neointima formation. Methods and ResultsIn 14 patients, at 6-month follow-up after coronary Wallstent implantation, 3D stent and vessel reconstruction was performed with a combined angiographic and intravascular ultrasound technique (ANGUS). The bare stent reconstruction was used to calculate in-stent SS at implantation, applying computational fluid dynamics. The flow was selected to deliver an average SS of 1.5 N/m2. SS and neointimal thickness (Th) values were obtained with a resolution of 90° in the circumferential and 2.5 mm in the longitudinal direction. For each vessel, the relationship between Th and SS was obtained by linear regression analysis. Averaging the individual slopes and intercepts of the regression lines summarized the overall relationship. Average Th was 0.44±0.20 mm. Th was inversely related to SS: Th=(0.59±0.24)−(0.08±0.10)×SS (mm) (P <0.05). ConclusionsThese data show for the first time in vivo that the Th variations in Wallstents at 6-month follow-up are inversely related to the relative SS distribution. These findings support a hemodynamic mechanism underlying in-stent neointimal hyperplasia formation.

Evaluation of Endothelial Shear Stress and 3D Geometry as Factors Determining the Development of Atherosclerosis and Remodeling in Human Coronary Arteries in Vivo Combining 3D Reconstruction from Angiography and IVUS (ANGUS) with Computational Fluid Dynamics

The predilection sites of atherosclerotic plaques implicate rheologic factors like shear stress underlying the genesis of atherosclerosis. Presently no technique is available that enables one to provide 3D shear stress data in human coronary arteries in vivo. In this study, we describe a novel technique that uses a recently developed 3D reconstruction technique to calculate shear stress on the endothelium with computational fluid dynamics. In addition, we calculated local wall thickness, the principal plane of curvature, and the location of plaque with reference to this plane, relating these results to shear stress in a human right coronary artery in vivo. Wall thickness and shear stress values for the entire vessel for three inflow-velocity values (10 cm/second, 20 cm/second, and 30 cm/second equivalents with the Reynolds numbers 114,229, and 457) were as follows: 0.65 +/- 0.37 mm (n = 1600) and 19.6 +/- 1.7 dyne/cm2; 46.1 +/- 8.1 dyne/cm2 and 80.1 +/- 16.8 dyne/cm2 (n = 1600). Curvature was 25 +/- 9 (m-1), resulting in Dean numbers 20 +/- 8; 46 +/- 16, and 93 +/- 33. Selection of data at the inner curvature of the right coronary artery provided wall thickness values of 0.90 +/- 0.41 mm (n = 100), and shear stress was 17 +/- 17, 38 +/- 44, and 77 +/- 54 dyne/cm2 (n = 100), whereas wall thickness values at the outer curve were 0.37 +/- 0.17 mm (n = 100) and shear stress values were 22 +/- 17, 60 +/- 44, and 107 +/- 79 dyne/cm2 (n = 100). These findings could be reconciled by an inverse relationship between wall thickness and shear stress for each velocity level under study. For the first time for human vessels in vivo, evidence is presented that low shear stress promotes atherosclerosis. As the method is nondestructive, it allows repeated measurements in the same patient and will provide new insights in the progress of atherosclerosis.

The role of shear stress in the destabilization of vulnerable plaques and related therapeutic implications

American Heart Association type IV plaques consist of a lipid core covered by a fibrous cap, and develop at locations of eccentric low shear stress. Vascular remodeling initially preserves the lumen diameter while maintaining the low shear stress conditions that encourage plaque growth. When these plaques eventually start to intrude into the lumen, the shear stress in the area surrounding the plaque changes substantially, increasing tensile stress at the plaque shoulders and exacerbating fissuring and thrombosis. Local biologic effects induced by high shear stress can destabilize the cap, particularly on its upstream side, and turn it into a rupture-prone, vulnerable plaque. Tensile stress is the ultimate mechanical factor that precipitates rupture and atherothrombotic complications. The shear-stress-oriented view of plaque rupture has important therapeutic implications. In this review, we discuss the varying mechanobiologic mechanisms in the areas surrounding the plaque that might explain the otherwise paradoxical observations and unexpected outcomes of experimental therapies.

True 3-Dimensional Reconstruction of Coronary Arteries in Patients by Fusion of Angiography and IVUS (ANGUS) and Its Quantitative Validation

BACKGROUND True 3D reconstruction of coronary arteries in patients based on intravascular ultrasound (IVUS) may be achieved by fusing angiographic and IVUS information (ANGUS). The clinical applicability of ANGUS was tested, and its accuracy was evaluated quantitatively. METHODS AND REUSLTS: In 16 patients who were investigated 6 months after stent implantation, a sheath-based catheter was used to acquire IVUS images during an R-wave-triggered, motorized stepped pullback. First, a single set of end-diastolic biplane angiographic images documented the 3D location of the catheter at the beginning of pullback. From this set, the 3D pullback trajectory was predicted. Second, contours of the lumen or stent obtained from IVUS were fused with the 3D trajectory. Third, the angular rotation of the reconstruction was optimized by quantitative matching of the silhouettes of the 3D reconstruction with the actual biplane images. Reconstructions were obtained in 12 patients. The number of pullback steps, which determines the pullback length, closely agreed with the reconstructed path length (r=0.99). Geometric measurements in silhouette images of the 3D reconstructions showed high correlation (0.84 to 0.97) with corresponding measurements in the actual biplane angiographic images. CONCLUSIONS With ANGUS, 3D reconstructions of coronary arteries can be successfully and accurately obtained in the majority of patients.

Coronary stent implantation changes 3-D vessel geometry and 3-D shear stress distribution.

Mechanisms of in-stent restenosis are not fully understood. Shear stress is known to play a role in plaque and thrombus formation and is sensitive to changes in regional vessel geometry. Hence, we evaluated the regional changes in 3-D geometry and shear stress induced by stent placement in coronary arteries of pigs.Methods. 3-D reconstruction was performed, applying a combined angiographic and IVUS technique (ANGUS), from seven Wallstents (diameter 3.5 (n=3) and 5mm (n=4)), which were implanted in seven coronary arteries of five pigs. This 3-D geometry was used to calculate locally the curvature, while the shear stress distribution was obtained by computational fluid dynamics. Local changes in shear stress were obtained at the entrance and exit of the stent for baseline (0. 65+/-0.22 ml/s) and hyperemic flow (2.60+/-0.86 ml/s) conditions. Results. After stent implantation, the curvature increased by 121% at the entrance and by 100% at the exit of the stent, resulting in local changes in shear stress. In general, at the entrance of the stent local maxima in shear stress were generated, while at the exit both local maxima and minima in shear stress were observed (p<0.05). Additionally, the shear stress at the entrance and exit of the stent were correlated with the local curvature (r: 0.30-0.84).Conclusion. Stent implantation changes 3-D vessel geometry in such a way that regions with decreased and increased shear stress occur close to the stent edges. These changes might be related to the asymmetric patterns of in-stent restenosis.

Plaque Rupture in the Carotid Artery Is Localized at the High Shear Stress Region A Case Report

Background and Purpose— Cerebrovascular events are related to atherosclerotic disease in the carotid arteries and are frequently caused by rupture of a vulnerable plaque. These ruptures are often observed at the upstream region of the plaque, where the wall shear stress (WSS) is considered to be highest. High WSS is known for its influence on many processes affecting tissue regression. Until now, there have been no serial studies showing the relationship between plaque rupture and WSS. Summary of Case— We investigated a serial MRI data set of a 67-year-old woman with a plaque in the carotid artery at baseline and an ulcer at 10-month follow up. The lumen, plaque components (lipid/necrotic core, intraplaque hemorrhage), and ulcer were segmented and the lumen contours at baseline were used for WSS calculation. Correlation of the change in plaque composition with the WSS at baseline showed that the ulcer was generated exclusively at the high WSS location. Conclusions— In this serial MRI study, we found plaque ulceration at the high WSS location of a protruding plaque in the carotid artery. Our data suggest that high WSS influences plaque vulnerability and therefore may become a potential parameter for predicting future events.

Extension of Increased Atherosclerotic Wall Thickness Into High Shear Stress Regions Is Associated With Loss of Compensatory Remodeling

Background Atherosclerosis preferentially develops at average low shear stress (SS) locations. SS‐related signaling maintains lumen dimensions by inducing outward arterial remodeling. Prolonged plaque accumulation at low SS predilection locations explains an inverse relation between wall thickness (WT) and SS. No data exist on WT‐SS relations when lumen narrowing and loss of compensatory remodeling commence. Methods and Results In 14 patients, an angiographically normal artery (stenosis <50%) was investigated with ANGiography and ivUS (ANGUS) to provide 3D lumen and wall geometry. Selection of segments >5 mm in length, in between side branches, yielded 25 segments in 12 patients. SS at the wall was calculated by computational fluid dynamics. WT smaller than 0.2*lumen diameter was defined as normal. Largest arc of normal WT defined reference cross sections. Lumen area relative to the reference cross sections defined area stenosis (AS). Average segmental AS smaller or greater than 10% defined preserved or narrowed lumen, respectively. Total vessel area relative to the reference defined vascular remodeling (VR). For the preserved lumens (n=11, AS=1.7±5.6%, P=NS), axially averaged WT and SS were inversely related (slope, ‐0.46±0.55 mm/Pa, P<0.05) and VR was positive (7±9%, P<0.05). Narrowed segments (n=13, 1 excluded, AS=18±6%, P<0.05) showed no relation between WT and SS or vascular remodeling. Conclusions In patient coronary arteries, the often‐reported inverse WT‐SS relationship appears restricted to lumen preservation and positive vascular remodeling. Its disappearance with lumen narrowing suggests a growing importance of non‐SS‐related plaque progression. (Circulation. 2003;108:17‐23.)

Endothelial shear stress in the evolution of coronary atherosclerotic plaque and vascular remodelling: Current understanding and remaining questions

The heterogeneity of plaque formation, the vascular remodelling response to plaque formation, and the consequent phenotype of plaque instability attest to the extraordinarily complex pathobiology of plaque development and progression, culminating in different clinical coronary syndromes. Atherosclerotic plaques predominantly form in regions of low endothelial shear stress (ESS), whereas regions of moderate/physiological and high ESS are generally protected. Low ESS-induced compensatory expansive remodelling plays an important role in preserving lumen dimensions during plaque progression, but when the expansive remodelling becomes excessive promotes continued influx of lipids into the vessel wall, vulnerable plaque formation and potential precipitation of an acute coronary syndrome. Advanced plaques which start to encroach into the lumen experience high ESS at their most stenotic region, which appears to promote plaque destabilization. This review describes the role of ESS from early atherogenesis to early plaque formation, plaque progression to advanced high-risk stenotic or non-stenotic plaque, and plaque destabilization. The critical implication of the vascular remodelling response to plaque growth is also discussed. Current developments in technology to characterize local ESS and vascular remodelling in vivo may provide a rationale for innovative diagnostic and therapeutic strategies for coronary patients that aim to prevent clinical coronary syndromes.

Shear stress, vascular remodeling and neointimal formation

The role of shear stress in atherosclerosis has been well documented. However, its role in restenosis was underexposed. In this paper a novel in vivo measuring technique and several of its applications related to restenosis will be described. The technique consists of a combination of 3D reconstruction of blood vessels and computational fluid dynamics (CFD). The 3D imaging techniques use either of 3D intravascular ultrasound (IVUS) as a stand-alone technique or a fusion of biplane angiography and IVUS (ANGUS). CFD is applied in order to relate local shear stress distribution to the morphology of the vessel wall. In the applications of these techniques it will be demonstrated that shear stress plays a role in the prediction of neointimal formation in in-stent restenosis and in vascular remodeling after balloon angioplasty. Attempts to locally increase shear stress by a newly developed flow divider indicate that shear stress reduce in-stent neointimal formation by 50%.