Jolanda Spadavecchia

Surface Plasmon Resonance Biosensors Incorporating Gold Nanoparticles

SPR biosensing is increasingly popular for the detection of a multitude of biomolecules. It offers label-free detection and study of proteins, nucleic acids, and other biomolecules in real time. A recent trend involves incorporation of AuNPs, either within the sensing surface itself or as signal enhancing tagging molecules. The importance of AuNP and detecting agent spacing is described and techniques using macromolecular spacing aids are highlighted. Recent methods to enhance SPR detection capabilities using gold nanoparticles are reviewed, as well as device fabrication and the results of incorporation. SPR detection is a highly versatile method for the detection of biomolecules and, with the incorporation of AuNPs, shows promise in extending it to a number of new applications.

Piezoelectric immunosensor for direct and rapid detection of staphylococcal enterotoxin A (SEA) at the ng level

A direct, label-free immunosensor was designed for the rapid detection and quantification of staphylococcal enterotoxin A (SEA) in buffered solutions using quartz crystal microbalance with dissipation (QCM-D) as transduction method. The sensing layer including the anti-SEA antibody was constructed by chemisorption of a self-assembled monolayer of cysteamine on the gold electrodes placed over the quartz crystal sensor followed by activation of the surface amino groups with the rigid homobifunctional cross-linker 1,4-phenylene diisothiocyanate (PDITC) and covalent linking of binding protein (protein A or protein G). Four anti-SEA antibodies (two of which from commercial source) have been selected to set up the most sensitive detection device. With the optimized sensing layer, a standard curve for the direct assay of SEA was established from QCM-D responses within a working range of 50-1000 or 2000 ngml(-1) with a detection limit of 20 ngml(-1). The total time for analysis was 15 min. Using a sandwich type assay, the response was ca. twice higher and consequently the lowest measurable concentration dropped down to 7 ngml(-1) for a total assay time of 25 min.

Targeted polyethylene glycol gold nanoparticles for the treatment of pancreatic cancer: from synthesis to proof-of-concept in vitro studies

The main objective of this study was to optimize and characterize a drug delivery carrier for doxorubicin, intended to be intravenously administered, capable of improving the therapeutic index of the chemotherapeutic agent itself, and aimed at the treatment of pancreatic cancer. In light of this goal, we report a robust one-step method for the synthesis of dicarboxylic acid-terminated polyethylene glycol (PEG)-gold nanoparticles (AuNPs) and doxorubicin-loaded PEG-AuNPs, and their further antibody targeting (anti-Kv11.1 polyclonal antibody [pAb]). In in vitro proof-of-concept studies, we evaluated the influence of the nanocarrier and of the active targeting functionality on the anti-tumor efficacy of doxorubicin, with respect to its half-maximal effective concentration (EC50) and drug-triggered changes in the cell cycle. Our results demonstrated that the therapeutic efficacy of doxorubicin was positively influenced not only by the active targeting exploited through anti-Kv11.1-pAb but also by the drug coupling with a nanometer-sized delivery system, which indeed resulted in a 30-fold decrease of doxorubicin EC50, cell cycle blockage, and drug localization in the cell nuclei. The cell internalization pathway was strongly influenced by the active targeting of the Kv11.1 subunit of the human Ether-à-go-go related gene 1 (hERG1) channel aberrantly expressed on the membrane of pancreatic cancer cells. Targeted PEG-AuNPs were translocated into the lysosomes and were associated to an increased lysosomal function in PANC-1 cells. Additionally, doxorubicin release into an aqueous environment was almost negligible after 7 days, suggesting that drug release from PEG-AuNPs was triggered by enzymatic activity. Although preliminary, data gathered from this study have considerable potential in the application of safe-by-design nano-enabled drug-delivery systems (ie, nanomedicines) for the treatment of pancreatic cancer, a disease with a poor prognosis and one of the main current burdens of today’s health care bill of industrialized countries.

One-step synthesis of collagen hybrid gold nanoparticles and formation on Egyptian-like gold-plated archaeological ivory.

A one-step method is reported to synthesize hybrid gold nanoparticles (AuNPs) by reduction of HAuCl4 in acetic solution in the presence of collagen (Col), dicarboxylic acid-terminated polyethylene glycol (PEG), and cetyltetrammonium bromide (CTAB) mixed with hydoxyapatite (HAP) as surfactants. Such formation process of AuNPs was shown to be responsible for purple stains naturally formed on Egyptianizing archaeological gilded ivories from 8th BC Syria. The understanding of this formation mechanism, which most likely involves a step with hybrid AuNPs, allows the establishing of an authenticity marker of ancient gold-plated ivories.

A reusable optical biosensor for the ultrasensitive and selective detection of unamplified human genomic DNA with gold nanostars.

A Surface Plasmon Resonance imaging (SPRi) based DNA sensors for the selective and ultrasensitive human genomic DNA detection, directly extracted from lymphocytes (bypassing PCR amplification), is reported. To achieve DNA detection, a rationally chosen star-shaped nanoparticle (NP), namely gold nanostar (AuNS), has been applied, for the first time, in a sandwich-like assay based on the selective capturing of specific DNA targets and the subsequent signal amplification by a secondary DNA probe linked to AuNS. The plasmonic profile, size and electric field enhancements at the star tips contributed to the maximization of plasmon coupling between LSPs and SPs as aimed for analytical signal magnification. The system was first tested using short synthetic DNA target sequences and applied to DNA biosensing, lowering 610-fold the detection limit from 6.1 nM (without NSs labeling) to 10 pM (with NSs labeling). Then the biosensor was applied to genomic DNA samples, extracted from human lymphocytes and undergoing only to a simple ultrasonic fragmentation, lowering (~435 fold) the detection limit from 3.0 fM (without NSs labeling) to 6.9 aM (with NSs labeling). Thanks to the assay optimization, we proved that tuning the NSs surface coverage with DNA linked to nanoparticles is crucial not only for the increase of signals but also for the regenerability/reusability of the biosensor for tens of measurement cycles.

The amphiphilic hydrophobin Vmh2 plays a key role in one step synthesis of hybrid protein-gold nanoparticles.

We report a simple and original method to synthesize gold nanoparticles in which a fungal protein, the hydrophobin Vmh2 from Pleurotus ostreatus and dicarboxylic acid-terminated polyethylene-glycol (PEG) has been used as additional components in a one step process, leading to hybrid protein-metal nanoparticles (NPs). The nanoparticles have been characterized by ultra-violet/visible, infrared and X-ray photoelectron spectroscopies, dynamic light scattering and also by electron microscopy imaging. The results of these analytical techniques highlight nanometric sized, stable, hybrid complexes of about 12 nm, with outer surface rich in functional chemical groups. Interaction with protein and antibodies has also been exploited.

Bioconjugated gold nanorods to enhance the sensitivity of FT-SPR-based biosensors.

In this paper, we report a feasible solvent-free approach for the synthesis and self-assembling of gold nanorods after bioconjugation to antibodies; scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images revealed a remarkable shape and size narrow distribution, as well as a tendency to form linear assemblies on a clean gold surface, upon interaction with antibodies. These bioconjugated gold nanorods were in turns tested in a model Fourier Transform Surface Plasmon Resonance (FT-SPR)-based immunosensor, leading to an improvement of the detection sensitivity by a factor of 8. The results highlight the simplicity of the synthesis protocol of gold nanorods and the interest of using them as labels to enhance the sensitivity of SPR-based sensors.

One-pot synthesis of a gold nanoparticle-Vmh2 hydrophobin nanobiocomplex for glucose monitoring

HydrophobinVmh2 is a small amphiphilic protein, which self-assembles on different surfaces and naturally interacts with glucose. Here, we report on the synthesis of a nanobiocomplex made of polyethylene glycol, Vmh2 and gold nanoparticles by a one-step process and on its ability to recognise glucose in an aqueous solution at 0.3-0.6-1.2 mg ml(-1) concentrations. Even though the Vmh2 proteins are intrinsically bonded to the gold core, effective glucose interaction monitoring was demonstrated by using dynamic light scattering, ultraviolet-visible, polarization-modulated infrared reflection-absorption and x-ray photoelectron spectroscopies. Experimental results highlighted an affinity constant of 7.3 ± 0.3 mg ml(-1) between the nanobiosystem and the sugar, and a detection sensitivity of 0.13 ± 0.06 a.u./mg ml(-1).

Tunable Design of Gold(III)–Doxorubicin Complex–PEGylated Nanocarrier. The Golden Doxorubicin for Oncological Applications

To date, the translation of Au (III) complexes into chemotherapeutic agents has been hindered by their low stability under physiological conditions, a crucial parameter in drug development. In this study, we report an innovative four-step synthesis of a stable Au (III)-doxorubicin (DOX) complex, acting as a key constitutive component of doxorubicin-loaded PEG-coated nanoparticles (DOX IN-PEG-AuNPs). For therapeutic purposes, such AuNPs were then functionalized with the anti-Kv11.1 polyclonal antibody (pAb), which specifically recognizes the hERG1 channel that is overexpressed on the membrane of human pancreatic cancer cells. The nature of the interactions between DOX and Au (III) ions was probed by various analytical techniques (Raman spectroscopy, UV-vis, and (1)H NMR), which enabled studying the Au (III)-DOX interactions during AuNPs formation. The theoretical characterization of the vibrational bands and the electronic transitions of the Au (III)-DOX complex calculated through computational studies showed significant qualitative agreement with the experimental observations on AuNPs samples. Stability in physiological conditions and efficient drug loading (up to to 85 w/w %) were achieved, while drug release was strongly dependent on the structure of DOX IN-PEG-AuNPs and on the pH. Furthermore, the interactions among DOX, PEG, and Au (III) ions in DOX IN-PEG-AuNPs differed significantly from those found in polymer-modified AuNPs loaded with DOX by covalent linkage, referred to as DOX ON-PEG-AuNPs. In vitro experiments indeed demonstrated that such differences strongly influenced the therapeutic potential of AuNPs in pancreatic cancer treatment, with a significant increase of the DOX therapeutic index when complexed to Au (III) ions. Collectively, our study demonstrated that Au (III)-DOX complexes as building blocks of PEGylated AuNPs constitutes a promising approach to transform promising Au (III) complexes into real chemotherapeutic drugs for the treatment of pancreatic cancer.

Interaction of Thermus thermophilus ArsC enzyme and gold nanoparticles naked-eye assays speciation between As(III) and As(V)

The thermophilic bacterium Thermus thermophilus HB27 encodes chromosomal arsenate reductase (TtArsC), the enzyme responsible for resistance to the harmful effects of arsenic. We report on adsorption of TtArsC onto gold nanoparticles for naked-eye monitoring of biomolecular interaction between the enzyme and arsenic species. Synthesis of hybrid biological-metallic nanoparticles has been characterized by transmission electron microscopy (TEM), ultraviolet-visible (UV-vis), dynamic light scattering (DLS) and phase modulated infrared reflection absorption (PM-IRRAS) spectroscopies. Molecular interactions have been monitored by UV-vis and Fourier transform-surface plasmon resonance (FT-SPR). Due to the nanoparticles aggregation on exposure to metal salts, pentavalent and trivalent arsenic solutions can be clearly distinguished by naked-eye assay, even at 85 μM concentration. Moreover, the assay shows partial selectivity against other heavy metals.