Jonas Keiler

Evolutionary morphology of the hemolymph vascular system in hermit and king crabs (Crustacea: Decapoda: Anomala).

The morphological transformation of hermit crabs into crab‐like king crabs in the evolution of decapod crustaceans represents a remarkable case of carcinization or evolutionary shaping into a crab‐like form. In this study, we focus on internal organs such as the hemolymph vascular system and adjacent anatomical structures of several Recent hermit crab (Paguridae) and king crab (Lithodidae) species. There are various correspondences in the morphology of the arterial systems in the dorsal cephalothorax of the two taxa, especially with regard to the anterior aorta, anterior lateral arteries, and hepatic arteries. In the pleon, the posterior aorta in both taxa displays a proximal bifurcation and follows an asymmetrical course. The ventral vessel system, on the other hand, which mainly supplies the limbs, differs significantly between the taxa, with pagurids displaying the plesiomorphic condition. The pattern of the ventral vessel system in Lithodidae is influenced by morphological transformations of integumental structures during carcinization. One of these transformations was the broadening of the sternites, which resulted in a widening of the space between the endosternites. In addition, changes in the morphology of the endophragmal skeleton in Lithodidae led to an increase in the potential for intraspecific variability and interspecific variation in the arterial branching pattern. J. Morphol., 2013.

Evolutionary morphology of the organ systems in squat lobsters and porcelain crabs (crustacea: Decapoda: Anomala): an insight into carcinization.

Porcelain crabs (Porcellanidae) are one of three taxa within anomuran crustaceans (Anomala) which possess a crab‐like body form. Curiously, these three lineages evolved this shape independently from true crabs (Brachyura) in the course of the evolutionary process termed carcinization. The entire pleon in porcelain crabs is flexed under the cephalothorax and the carapace is approximately as broad as long. Despite their crab‐like habitus, porcelain crabs are phylogenetically nested within squat lobsters (Munidopsidae, Munididae, Galatheidae). With a pleon which is only partly flexed under the cephalothorax and a cephalothorax which is longer than it is broad, squat lobsters represent morphologically intermediate forms between lobster‐like and crab‐like body shapes. Carcinization has so far mostly been studied with respect to outer morphology; however, it is evident that internal anatomical features are influenced through this change of body shape too. In this paper, the situation in Galatheoidea is elucidated by adding more taxa to existing descriptions of the hemolymph vascular systems and associated structures and organs. Micro‐computer tomography and 3D reconstruction provide new insights. Autapomorphic states of various internal anatomical characters are present in nearly all the studied species, also reflecting some degree of anatomical disparity found within Galatheoidea. The ventral vessel system of porcelain crabs differs distinctly from that of squat lobsters. The differences in question are coherent (i.e. structural dependent) with morphological transformations in the integument, such as the shortening of the sternal plastron, which evolved in the course of carcinization. Shifts in the gonads and the pleonal neuromeres are coherent with the loss of the caridoid escape reaction, which in turn is a consequence of carcinization. The arterial transformations, however, are minor compared to other instances of carcinization in anomuran crustaceans since the last common ancestor of squat lobsters and porcelain crabs was already “half carcinized”. J. Morphol. 276:1–21, 2015.

The first organ-based ontology for arthropods (Ontology of Arthropod Circulatory Systems - OArCS) and its integration into a novel formalization scheme for morphological descriptions

&NA; Morphology, the oldest discipline in the biosciences, is currently experiencing a renaissance in the field of comparative phenomics. However, morphological/phenotypic research still suffers on various levels from a lack of standards. This shortcoming, first highlighted as the “linguistic problem of morphology”, concerns the usage of terminology and also the need for formalization of morphological descriptions themselves, something of paramount importance not only to the field of morphology but also when it comes to the use of phenotypic data in systematics and evolutionary biology. We therefore argue, that for morphological descriptions, the basis of all systematic and evolutionary interpretations, ontologies need to be utilized which are based exclusively on structural qualities/properties and which in no case include statements about homology and/or function. Statements about homology and function constitute interpretations on a different or higher level. Based on these “anatomy ontologies”, further ontological dimensions (e.g., referring to functional properties or homology) may be exerted for a broad use in evolutionary phenomics. To this end we present the first organ‐based ontology for the most species‐rich animal group, the Arthropoda. Our Ontology of Arthropod Circulatory Systems (OArCS) contains a comprehensive collection of 383 terms (i.e., labels) tied to 296 concepts (i.e., definitions) collected from the literature on phenotypic aspects of circulatory organ features in arthropods. All of the concepts used in OArCS are based exclusively on structural features, and in the context of the ontology are independent of homology and functional assumptions. We cannot rule out that in some cases, terms are used which in traditional usage and previous accounts might have implied homology and/or function (e.g. heart, sternal artery). Concepts are composed of descriptive elements that are used to classify observed instances into the organizational framework of the ontology. That is, descriptions in ontologies are only descriptions of individuals if they are necessary/and or sufficient representations of attributes (independently) observed and recorded for an individual. In addition, we here present for the first time an entirely new approach to formalizing phenotypic research, a semantic model for the description of a complex organ system in a highly disparate taxon, the arthropods. We demonstrate this with a formalized morphological description of the hemolymph vascular system in one specimen of the European garden spider Araneus diadematus. Our description targets five categories of descriptive statement: “position”, “spatial relationships”, “shape”, “constituents”, and “connections”, as the corresponding formalizations constitute exemplary patterns useful not only when talking about the circulatory system, but also in descriptions in general. The downstream applications of computer‐parsable morphological descriptions are widespread, with their core utility being the fact that they make it possible to compare collective description sets in computational time, that is, very quickly. Among other things, this facilitates the identification of phenotypic plasticity and variation when single individuals are compared, the identification of those traits which correlate between and within taxa, and the identification of links between morphological traits and genetic (using GO, Gene Ontology) or environmental (using ENVO, Environmental Ontology) factors. [Arthropoda; concept; function; hemolymph vascular system; homology; terminology.]

The femoral vein diameter and its correlation with sex, age and body mass index – An anatomical parameter with clinical relevance

Background The femoral vein diameter is a critical factor when assessing endoprosthetic valve size for the treatment of chronic venous insufficiency. To examine the previously stated correlation between body mass index and femoral vein diameter and to re-assess the anatomical and physiological demands for a valve implant for chronic venous insufficiency treatment, we measured the femoral vein diameter in 82 subjects. Method Femoral vein diameters (164 legs) were measured with B-mode sonography both in supine position at rest and in upright position during Valsalva maneuver. Result The mean femoral vein diameter differed significantly between supine position (13.6 ± 3.0 mm) and upright position (16.4 ± 2.6 mm). Males possessed a significant bigger diameter than females. A significant positive correlation between femoral vein diameter and body mass index was observed. Conclusion Assuming an increased femoral vein diameter due to obesity would further impair valve functionality by increasing distance between both valve cusps. For the development of artificial venous valves, it is crucial to consider patient- and condition-dependent vein dilation.

Neointimal fibrotic lead encapsulation – Clinical challenges and demands for implantable cardiac electronic devices

Every tenth patient with a cardiac pacemaker or implantable cardioverter-defibrillator implanted is expected to have at least one lead problem in his lifetime. However, transvenous leads are often difficult to remove due to thrombotic obstruction or extensive neointimal fibrotic ingrowth. Despite its clinical significance, knowledge on lead-induced vascular fibrosis and neointimal lead encapsulation is sparse. Although leadless pacemakers are already available, their clinical operating range is limited. Therefore, lead/tissue interactions must be further improved in order to improve lead removals in particular. The published data on the coherences and issues related to lead associated vascular fibrosis and neointimal lead encapsulation are reviewed and discussed in this paper.

Hemodynamic influence of design parameters of novel venous valve prostheses

Abstract Venous ulcers of the lower limbs are one clinical manifestation of chronic venous insufficiency. Currently, there is no venous valve prosthesis available. This study presents novel venous valve prostheses made of threedimensional electrospun fibrous nonwoven leaflets. The aim of this study was to prove the feasibility of the manufacturing process as well as to investigate design features of the venous valve prostheses from a hemodynamic point of view. An adapted pulse duplicator system (ViVitrolabs, Victoria, BC, CA) was used for characterization of the hydrodynamic performance. For eight different venous valve prototypes flow rate, effective orifice area and regurgitation fraction was investigated in vitro. In particular, tricusp valve designs showed an up to 40% higher effective orifice area as well as 15% higher maximum flowrate compared to bicusp valve designs. However, the regurgitation fraction of the bicusp valve designs is up to 86% lower compared to tricusp valve. Additionally, the hemodynamic performance of the tricuspid valves showed a high sensitivity regarding the leaflet length. Bicuspid valves are less sensitive to changes of design parameters, more sufficient and therefore highly reliable.

Numerical simulation of a transcatheter aortic heart valve under application-related loading

Abstract For the treatment of severe symptomatic aortic valve stenosis, minimally invasive heart valve prostheses have more recently become the lifesaving solution for elderly patients with high operational risk and thus, are often implanted in patients with challenging aortic root configuration. A correct prosthesis deployment and stent adaption to the target region is essential to ensure optimal leaflet performance and long-term prosthesis function. The objective of this study was the development of a suitable in silico setup for structural numerical simulation of a transcatheter aortic valve (TAV) in different cases of clinical relevance. A transcatheter valve prosthesis comprising an unpressurized trileaflet heart valve and an adapted stent configuration was designed. An aortic root (AR) model was developed, based on microcomputed tomography of a native healthy specimen. Using the finite-element analysis (FEA), various loading cases including prosthesis biomechanics with valve opening and closing under physiological pressure ratios throughout a cardiac cycle, prosthesis crimping as well as crimping and release into the developed AR model were simulated. Hyperelastic constitutive law for polymeric leaflet material and superelasticity of shape memory alloys for the self-expanding Nitinol stent structure were implemented into the FEA setup. Calculated performance of the valve including the stent structure demonstrated enhanced leaflet opening and closing as a result of stent deformation and redirected loading. Crimping and subsequent release into the AR model as well as the stent adaption to the target region after expansion proved the suitability of the TAV design for percutaneous application. FEA represented a useful tool for numerical simulation of an entire minimally invasive heart valve prosthesis in relevant clinical scenarios.

Human Femoral Vein Diameter and Topography of Valves and Tributaries: A Post Mortem Analysis: Femoral Vein Dimensions, Tributaries, and Valves

The femoral vein (FV) is a clinically important vessel. Failure of its valves can lead to chronic venous insufficiency (CVI) with severe manifestations such as painful ulcers. Although they are crucial for identifying suitable implant sites for therapeutic valves, studies on the topography of FV tributaries and valves are rare. Moreover, the femoral vein diameter (FVD) must be known to assess the morphometric requirements for valve implants. To reassess the anatomical requirements for valve implants, 155 FVs from 82 human corpses were examined. FVDs and tributary and valve topographies were assessed using a laboratory straightedge. The FVD increased from 6 mm in the distal femoropopliteal vein to 11 mm in the iliofemoral vein proximal to the saphenofemoral junction (SFJ). Diameters were significantly bigger in males than females. Height correlated positively with FVD. Distal to the SFJ, within a distance of 38 cm, one to eight valves were present. Up to two valves were present within 10 cm proximal to the SFJ. Individual tributary and valve topography must be considered to ensure appropriate design and successful implantation of a venous valve for CVI therapy in the FV. A suitable implant site would be proximal to the SFJ via an infrainguinal transfemoral access. Clin. Anat. 31:1065–1076, 2018.

Fast and reliable dissection of porcine parathyroid glands — A protocol for molecular and histological analyses

As calcium and phosphorus are of vital importance for life, physiological activity of the parathyroid glands (PTGs) is crucial to maintain mineral homeostasis and bone mineralization. However, PTG-specific molecular routes in response to environmental factors and intrinsic hormonal responses are not yet fully understood. Since nutrient requirements, pathophysiology and functional genomics of pigs are similar to those of humans, pigs might be a suitable model to study the holistic gene expression and physiological aspects of the parathyroid gland, which could be used in both animal sciences and biomedical research. However, due to their small size and hidden location, the dissection of the PTGs, particularly in pigs, is difficult. Therefore, a protocol for untrained dissectors has been established that allows a fast and reliable identification of the PTGs in domestic pigs. Based on their localization within the cranial thymus near the carotid bifurcation, sampling was verified by histological staining and mRNA expression pattern. Analyses revealed the prominence of parathyroid hormone (PTH)-producing chief cells. Moreover, the copy numbers of PTH differed substantially between the PTGs and their surrounding thymus tissue, as PTH was expressed virtually exclusively in the PTGs. The developed protocol will substantially facilitate a fast and reliable dissection of porcine PTGs which is essential for studies characterizing the molecular mechanisms of parathyroid glands, e.g. when applying new feeding strategies in pigs.