Jonas Sävmarker

Microwave-promoted palladium(II)-catalyzed C-P bond formation by using arylboronic acids or aryltrifluoroborates.

The first Pd(II)-catalyzed P arylation has been performed by using palladium acetate, the rigid bidentate ligand dmphen (dmphen=2,9-dimethyl-1,10-phenanthroline), and without the addition of base or acid. Couplings of arylboronic acids or aryl trifluoroborates with H-phosphonate dialkyl esters were conducted in 30 min with controlled microwave (MW) heating under non-inert conditions. Aryl phosphites were also synthesized at room temperature with atmospheric air as the sole reoxidant. The arylated phosphonates were isolated in 44-90 % yields. The excellent chemoselectivity of the method was illustrated in the synthesis of a Mycobacterium tuberculosis glutamine synthetase (MTB-GS) inhibitor. Online ESIMS was used to detect cationic palladium species in ongoing reactions directly, and a catalytic cycle has been proposed based on these results.

Synthesis of styrenes by palladium(II)-catalyzed vinylation of arylboronic acids and aryltrifluoroborates by using vinyl acetate

One Heck of a reaction: Treatment of arylboronic acids or aryltrifluoroborates with vinyl acetate by using a palladium(II) catalyst gives the corresponding styrenes (see scheme). No palladium reoxidant is needed and the vinylation is performed under non-inert conditionsReactions of aromatic and heteroaromatic boronic acids or aryltrifluoroborate salts with vinyl acetate in the presence of a palladium(II) catalyst give the corresponding styrenes in good yields. This Heck reaction proceeds with microwave heating in less than 30 min at 140 degrees C in the absence of base and tolerates a variety of substituents. No palladium reoxidant is needed and the vinylation is performed under non-inert conditions. Mass spectrometry (electrospray ionization mass spectrometry (ESIMS) and tandem mass spectrometry (MS/MS)) was used to identify cationic palladium-containing complexes in ongoing reactions. The key intermediates that have been detected, together with experiments that used deuterated vinyl acetate, support the existence of catalytically active palladium hydride species, and that it is the arylation of ethylene, not vinyl acetate, which generates the styrene product. The mechanism of the reaction is discussed in terms of the palladium(II) intermediates mentioned above.

Palladium(II)-Catalyzed Desulfitative Synthesis of Aryl Ketones from Sodium Arylsulfinates and Nitriles: Scope, Limitations, and Mechanistic Studies

A fast and efficient protocol for the palladium(II)-catalyzed production of aryl ketones from sodium arylsulfinates and various organic nitriles under controlled microwave irradiation has been developed. The wide scope of the reaction has been demonstrated by combining 14 sodium arylsulfinates and 21 nitriles to give 55 examples of aryl ketones. One additional example illustrated that, through the choice of the nitrile reactant, benzofurans are also accessible. The reaction mechanism was investigated by electrospray ionization mass spectrometry and DFT calculations. The desulfitative synthesis of aryl ketones from nitriles was also compared to the corresponding transformation starting from benzoic acids. Comparison of the energy profiles indicates that the free energy requirement for decarboxylation of 2,6-dimethoxybenzoic acid and especially benzoic acid is higher than the corresponding desulfitative process for generating the key aryl palladium intermediate. The palladium(II) intermediates detected by ESI-MS and the DFT calculations provide a detailed understanding of the catalytic cycle.

Decarboxylative Palladium(II)‐Catalyzed Synthesis of Aryl Amidines from Aryl Carboxylic Acids: Development and Mechanistic Investigation

A fast and convenient synthesis of aryl amidines starting from carboxylic acids and cyanamides is reported. The reaction was achieved by palladium(II)-catalysis in a one-step microwave protocol using [Pd(O2CCF3)2], 6-methyl-2,2′-bipyridyl and trifluoroacetic acid (TFA) in N-methylpyrrolidinone (NMP), providing the corresponding aryl amidines in moderate to excellent yields. The protocol is very robust with regards to the cyanamide coupling partner but requires electron-rich ortho-substituted aryl carboxylic acids. Mechanistic insight was provided by a DFT investigation and direct ESI-MS studies of the reaction. The results of the DFT study correlated well with the experimental findings and, together with the ESI-MS study, support the suggested mechanism. Furthermore, a scale-out (scale-up) was performed with a non-resonant microwave continuous-flow system, achieving a maximum throughput of 11 mmol h−1 by using a glass reactor with an inner diameter of 3 mm at a flow rate of 1 mL min−1.

Lignin depolymerization to monophenolic compounds in a flow-through system

A reductive lignocellulose fractionation in a flow-through system in which pulping and transfer hydrogenolysis steps were separated in time and space has been developed. Without the hydrogenolysis step or addition of trapping agents to the pulping, it is possible to obtain partially depolymerized lignin (21 wt% monophenolic compounds) that is prone to further processing. By applying a transfer hydrogenolysis step 37 wt% yield of lignin derived monophenolic compounds was obtained. Pulp generated in the process was enzymatically hydrolyzed to glucose in 87 wt% yield without prior purification.

Design and synthesis of BACE-1 inhibitors utilizing a tertiary hydroxyl motif as the transition state mimic

Two series of drug-like BACE-1 inhibitors with a shielded tertiary hydroxyl as transition state isostere have been synthesized. The most potent inhibitor exhibited a BACE-1 IC(50) value of 0.23 microM.

Temperature measurements with two different IR sensors in a continuous-flow microwave heated system.

Summary In a continuous-flow system equipped with a nonresonant microwave applicator we have investigated how to best assess the actual temperature of microwave heated organic solvents with different characteristics. This is non-trivial as the electromagnetic field will influence most traditional methods of temperature measurement. Thus, we used a microwave transparent fiber optic probe, capable of measuring the temperature inside the reactor, and investigated two different IR sensors as non-contact alternatives to the internal probe. IR sensor 1 measures the temperature on the outside of the reactor whilst IR sensor 2 is designed to measure the temperature of the fluid through the borosilicate glass that constitutes the reactor wall. We have also, in addition to the characterization of the before mentioned IR sensors, developed statistical models to correlate the IR sensor reading to a correct value of the inner temperature (as determined by the internal fiber optic probe), thereby providing a non-contact, indirect, temperature assessment of the heated solvent. The accuracy achieved with these models lie well within the range desired for most synthetic chemistry applications.

Investigation of α-phenylnorstatine and α-benzylnorstatine as transition state isostere motifs in the search for new BACE-1 inhibitors.

Inhibition of the BACE-1 protease enzyme has over the recent decade developed into a promising drug strategy for Alzheimer therapy. In this report, more than 20 new BACE-1 protease inhibitors based on α-phenylnorstatine, α-benzylnorstatine, iso-serine, and β-alanine moieties have been prepared. The inhibitors were synthesized by applying Fmoc solid phase methodology and evaluated for their inhibitory properties. The most potent inhibitor, tert-alcohol containing (R)-12 (IC(50)=0.19μM) was co-crystallized in the active site of the BACE-1 protease, furnishing a novel binding mode in which the N-terminal amine makes a hydrogen bond to one of the catalytic aspartic acids.

Binding to and Inhibition of Insulin-Regulated Aminopeptidase by Macrocyclic Disulfides Enhances Spine Density.

Angiotensin IV (Ang IV) and related peptide analogs, as well as nonpeptide inhibitors of insulin-regulated aminopeptidase (IRAP), have previously been shown to enhance memory and cognition in animal models. Furthermore, the endogenous IRAP substrates oxytocin and vasopressin are known to facilitate learning and memory. In this study, the two recently synthesized 13-membered macrocyclic competitive IRAP inhibitors HA08 and HA09, which were designed to mimic the N terminus of oxytocin and vasopressin, were assessed and compared based on their ability to bind to the IRAP active site, and alter dendritic spine density in rat hippocampal primary cultures. The binding modes of the IRAP inhibitors HA08, HA09, and of Ang IV in either the extended or γ-turn conformation at the C terminus to human IRAP were predicted by docking and molecular dynamics simulations. The binding free energies calculated with the linear interaction energy method, which are in excellent agreement with experimental data and simulations, have been used to explain the differences in activities of the IRAP inhibitors, both of which are structurally very similar, but differ only with regard to one stereogenic center. In addition, we show that HA08, which is 100-fold more potent than the epimer HA09, can enhance dendritic spine number and alter morphology, a process associated with memory facilitation. Therefore, HA08, one of the most potent IRAP inhibitors known today, may serve as a suitable starting point for medicinal chemistry programs aided by MD simulations aimed at discovering more drug-like cognitive enhancers acting via augmenting synaptic plasticity.

Inhibition of Insulin-Regulated Aminopeptidase (IRAP) by Arylsulfonamides

The inhibition of insulin-regulated aminopeptidase (IRAP, EC 3.4.11.3) by angiotenesin IV is known to improve memory and learning in rats. Screening 10 500 low-molecular-weight compounds in an enzyme inhibition assay with IRAP from Chinese Hamster Ovary (CHO) cells provided an arylsulfonamide (N-(3-(1H-tetrazol-5-yl)phenyl)-4-bromo-5-chlorothiophene-2-sulfonamide), comprising a tetrazole in the meta position of the aromatic ring, as a hit. Analogues of this hit were synthesized, and their inhibitory capacities were determined. A small structure–activity relationship study revealed that the sulfonamide function and the tetrazole ring are crucial for IRAP inhibition. The inhibitors exhibited a moderate inhibitory potency with an IC50=1.1±0.5 μm for the best inhibitor in the series. Further optimization of this new class of IRAP inhibitors is required to make them attractive as research tools and as potential cognitive enhancers.