Jonathan S. Alden

Impermeable Atomic Membranes from Graphene Sheets

We demonstrate that a monolayer graphene membrane is impermeable to standard gases including helium. By applying a pressure difference across the membrane, we measure both the elastic constants and the mass of a single layer of graphene. This pressurized graphene membrane is the worlds thinnest balloon and provides a unique separation barrier between 2 distinct regions that is only one atom thick.

Grains and grain boundaries in single-layer graphene atomic patchwork quilts

The properties of polycrystalline materials are often dominated by the size of their grains and by the atomic structure of their grain boundaries. These effects should be especially pronounced in two-dimensional materials, where even a line defect can divide and disrupt a crystal. These issues take on practical significance in graphene, which is a hexagonal, two-dimensional crystal of carbon atoms. Single-atom-thick graphene sheets can now be produced by chemical vapour deposition on scales of up to metres, making their polycrystallinity almost unavoidable. Theoretically, graphene grain boundaries are predicted to have distinct electronic, magnetic, chemical and mechanical properties that strongly depend on their atomic arrangement. Yet because of the five-order-of-magnitude size difference between grains and the atoms at grain boundaries, few experiments have fully explored the graphene grain structure. Here we use a combination of old and new transmission electron microscopy techniques to bridge these length scales. Using atomic-resolution imaging, we determine the location and identity of every atom at a grain boundary and find that different grains stitch together predominantly through pentagon–heptagon pairs. Rather than individually imaging the several billion atoms in each grain, we use diffraction-filtered imaging to rapidly map the location, orientation and shape of several hundred grains and boundaries, where only a handful have been previously reported. The resulting images reveal an unexpectedly small and intricate patchwork of grains connected by tilt boundaries. By correlating grain imaging with scanning probe and transport measurements, we show that these grain boundaries severely weaken the mechanical strength of graphene membranes but do not as drastically alter their electrical properties. These techniques open a new window for studies on the structure, properties and control of grains and grain boundaries in graphene and other two-dimensional materials.

Photo-Thermoelectric Effect at a Graphene Interface Junction

We investigate the optoelectronic response of a graphene single-bilayer interface junction using photocurrent (PC) microscopy. We measure the polarity and amplitude of the PC while varying the Fermi level by tuning a gate voltage. These measurements show that the generation of PC is by a photothermoelectric effect. The PC displays a factor of approximately 10 increase at the cryogenic temperature as compared to room temperature. Assuming the thermoelectric power has a linear dependence on the temperature, the inferred graphene thermal conductivity from temperature dependent measurements has a T(1.5) dependence below approximately 100 K, which agrees with recent theoretical predictions.

Large-Scale Arrays of Single-Layer Graphene Resonators

We fabricated large arrays of suspended, single-layer graphene membrane resonators using chemical vapor deposition (CVD) growth followed by patterning and transfer. We measure the resonators using both optical and electrical actuation and detection techniques. We find that the resonators can be modeled as flat membranes under tension, and that clamping the membranes on all sides improves agreement with our model and reduces the variation in frequency between identical resonators. The resonance frequency is tunable with both electrostatic gate voltage and temperature, and quality factors improve dramatically with cooling, reaching values up to 9000 at 10 K. These measurements show that it is possible to produce large arrays of CVD-grown graphene resonators with reproducible properties and the same excellent electrical and mechanical properties previously reported for exfoliated graphene.

Free-Standing Epitaxial Graphene

We report on a method to produce free-standing graphene sheets from epitaxial graphene on silicon carbide (SiC) substrate. Doubly clamped nanomechanical resonators with lengths up to 20 microm were patterned using this technique and their resonant motion was actuated and detected optically. Resonance frequencies of the order of tens of megahertz were measured for most devices, indicating that the resonators are much stiffer than expected for beams under no tension. Raman spectroscopy suggests that the graphene is not chemically modified during the release of the devices, demonstrating that the technique is a robust means of fabricating large-area suspended graphene structures.

Imaging Atomic Rearrangements in Two-Dimensional Silica Glass: Watching Silica’s Dance

Glassy Eyed In crystalline materials, the collective motion of atoms in one- and two-dimensional defects—like dislocations and stacking faults—controls the response to an applied strain, but how glassy materials change their structure in response to strain is much less clear. Huang et al. (p. 224; see the Perspective by Heyde) used advanced-transmission electron microscopy to investigate the structural rearrangements in a two-dimensional glass, including the basis for shear deformations and the atomic behavior at the glass/liquid interface. Dynamics of individual atoms in a two-dimensional silicate glass have been observed using transmission electron microscopy. [Also see Perspective by Heyde] Structural rearrangements control a wide range of behavior in amorphous materials, and visualizing these atomic-scale rearrangements is critical for developing and refining models for how glasses bend, break, and melt. It is difficult, however, to directly image atomic motion in disordered solids. We demonstrate that using aberration-corrected transmission electron microscopy, we can excite and image atomic rearrangements in a two-dimensional silica glass—revealing a complex dance of elastic and plastic deformations, phase transitions, and their interplay. We identified the strain associated with individual ring rearrangements, observed the role of vacancies in shear deformation, and quantified fluctuations at a glass/liquid interface. These examples illustrate the wide-ranging and fundamental materials physics that can now be studied at atomic-resolution via transmission electron microscopy of two-dimensional glasses.

Strain solitons and topological defects in bilayer graphene

Bilayer graphene has been a subject of intense study in recent years. The interlayer registry between the layers can have dramatic effects on the electronic properties: for example, in the presence of a perpendicular electric field, a band gap appears in the electronic spectrum of so-called Bernal-stacked graphene [Oostinga JB, et al. (2007) Nature Materials 7:151–157]. This band gap is intimately tied to a structural spontaneous symmetry breaking in bilayer graphene, where one of the graphene layers shifts by an atomic spacing with respect to the other. This shift can happen in multiple directions, resulting in multiple stacking domains with soliton-like structural boundaries between them. Theorists have recently proposed that novel electronic states exist at these boundaries [Vaezi A, et al. (2013) arXiv:1301.1690; Zhang F, et al. (2013) arXiv:1301.4205], but very little is known about their structural properties. Here we use electron microscopy to measure with nanoscale and atomic resolution the widths, motion, and topological structure of soliton boundaries and related topological defects in bilayer graphene. We find that each soliton consists of an atomic-scale registry shift between the two graphene layers occurring over 6–11 nm. We infer the minimal energy barrier to interlayer translation and observe soliton motion during in situ heating above 1,000 °C. The abundance of these structures across a variety of samples, as well as their unusual properties, suggests that they will have substantial effects on the electronic and mechanical properties of bilayer graphene.

Graphene as a protein crystal mounting material to reduce background scatter

The overall signal-to-noise ratio per unit dose for X-ray diffraction data from protein crystals can be improved by reducing the mass and density of all material surrounding the crystals. This article demonstrates a path towards the practical ultimate in background reduction by use of atomically thin graphene sheets as a crystal mounting platform for protein crystals. The results show the potential for graphene in protein crystallography and other cases where X-ray scatter from the mounting material must be reduced and specimen dehydration prevented, such as in coherent X-ray diffraction imaging of microscopic objects.

Magnetically Actuated Single-Walled Carbon Nanotubes.

We couple magnetic tweezer techniques with standard lithography methods to make magnetically actuated single-walled carbon nanotube (SWNT) devices. Parallel arrays of 4-10 μm-long SWNT cantilevers are patterned with one end anchored to the substrate and the other end attached to a micron-scale iron magnetic tag that is free to move in solution. Thermal fluctuations of this tag provide a direct measurement of the spring constant of the SWNT cantilevers, yielding values of 10(-7)-10(-8) N/m. This tag is also a handle for applying forces and torques using externally applied magnetic field gradients. These techniques provide a platform on which interaction forces between SWNTs and other objects such as biomolecules and cells can be measured in situ.

Atomic imaging across strain boundaries in bilayer graphene with ADF-STEM and DF-TEM

Bilayer graphene possesses two degenerate lowest energy configurations which are geometrically mirrored—AB and BA stacking[1]. Both stacking geometries have been observed as domains in bilayer systems grown by chemical vapor deposition[2]. Here we examine the structure at the interfaces of stacking domains using atomic-resolution scanning transmission electron microscopy (STEM) and standard dark-field TEM[3]. We find that domain boundaries are formed by a continuous strain between layers with a displacement direction and magnitude quantized by the bilayer energy landscape. The strained interfaces between stacking domains are often microns in length and have been predicted to contain unique electronic properties[4].