Jordi Piella

Size-Dependent Protein–Nanoparticle Interactions in Citrate-Stabilized Gold Nanoparticles: The Emergence of the Protein Corona

Surface modifications of highly monodisperse citrate-stabilized gold nanoparticles (AuNPs) with sizes ranging from 3.5 to 150 nm after their exposure to cell culture media supplemented with fetal bovine serum were studied and characterized by the combined use of UV-vis spectroscopy, dynamic light scattering, and zeta potential measurements. In all the tested AuNPs, a dynamic process of protein adsorption was observed, evolving toward the formation of an irreversible hard protein coating known as Protein Corona. Interestingly, the thickness and density of this protein coating were strongly dependent on the particle size, making it possible to identify different transition regimes as the size of the particles increased: (i) NP-protein complexes (or incomplete corona), (ii) the formation of a near-single dense protein corona layer, and (iii) the formation of a multilayer corona. In addition, the different temporal patterns in the evolution of the protein coating came about more quickly for small particles than for the larger ones, further revealing the significant role that size plays in the kinetics of this process. Since the biological identity of the NPs is ultimately determined by the protein corona and different NP-biological interactions take place at different time scales, these results are relevant to biological and toxicological studies.

Quantifying the Sensitivity of Multipolar (Dipolar, Quadrupolar, and Octapolar) Surface Plasmon Resonances in Silver Nanoparticles: The Effect of Size, Composition, and Surface Coating

The effect of composition, size, and surface coating on the sensitivity of localized multipolar surface plasmon resonances has been spectroscopically investigated in high-quality silver colloidal solutions with precisely controlled sizes from 10 to 220 nm and well-defined surface chemistry. Surface plasmon resonance modes have been intensively characterized, identifying the size-dependence of dipolar, quadrupolar, and octapolar modes. Modifications of the NPs surface chemistry revealed the higher sensitivity of large sizes, long molecules, thiol groups, and low-order resonance modes. We also extend this study to gold nanoparticles, aiming to compare the sensitivity of both materials, quantifying the higher sensitivity of silver.

Probing the surface reactivity of nanocrystals by the catalytic degradation of organic dyes: the effect of size, surface chemistry and composition

We herein present a comprehensive study on how the catalytic performance and reusability of Au nanocrystals (NCs) are affected by systematic variations of crystal size, surface coating and composition. The reductions of different organic dyes (4-nitrophenol, rhodamine B and methylene blue) by borohydride ions were used as model catalytic reactions. The catalytic performance of the Au NCs ranged between 3.6 to 110 nm was found to be dependent on crystal size, indicating that Au surface atoms have a distinct size-dependent reactivity in this reaction. Similarly, the catalytic performance was found to be strongly dependent on the nature of the coating molecule, obtaining lower catalytic activities for molecules strongly bound to the Au surface. Finally, the catalytic performance was found to be dependent on the chemical composition of the NC (Au, Ag, Pt) and the model dye used as a testing system, with the highest degradation rate found for methylene blue, followed by 4-nitrophenol and rhodamine B. We believe that this study provides a better understanding of the catalytic performance of Au NCs upon controlled modifications of the structural and morphological parameters, and a working environment that can be used to facilitate the selection of the optimum NC size, coating molecule and evaluation system for a particular study of interest.

Exploring New Synthetic Strategies for the Production of Advanced Complex Inorganic Nanocrystals

Abstract The design of new protocols for the colloidal synthesis of complex nanocrystals (NCs) with advanced functionalities, comprising both hybrid and hollow structures, and the study of their fundamental properties is of paramount importance for the development of a new generation of nanostructured materials. The possibility of tailoring the dimensional regime of NCs, along with its composition and structure, represents a landmark achievement in the control of their unique physico-chemical properties. These properties, alongside with the ability to cheaply produce high quality NCs in fairly large amounts by wet-chemistry techniques, leads to their potential applicability from materials science to nanomedicine. Within this context, this review is focused on describing a successful framework for designing synthetic strategies for the production of advanced complex NCs, integrating the development of new synthetic methods with its structural characterization, monitoring of their properties, and study of its reactivity. As a result, it is expected to provide new routes to produce robust and easy-to-process NCs in a wide range of sizes, shapes and configurations that can be explored to achieve the combination of all degrees of control, aiming to produce a complete and diverse library of material combinations that will expand its applicability in a wide diversity of fields.

Effects of systematic variation in size and surface coating of silver nanoparticles on their in vitro toxicity to macrophage RAW 264.7 cells

In literature, varying and sometimes conflicting effects of physicochemical properties of nanoparticles (NPs) are reported on their uptake and effects in organisms. To address this, small- and medium-sized (20 and 50 nm) silver nanoparticles (AgNPs) with specified different surface coating/charges were synthesized and used to systematically assess effects of NP-properties on their uptake and effects in vitro. Silver nanoparticles were fully characterized for charge and size distribution in both water and test media. Macrophage cells (RAW 264.7) were exposed to these AgNPs at different concentrations (0-200 µg/ml). Uptake dynamics, cell viability, induction of tumor necrosis factor (TNF)-α, ATP production, and reactive oxygen species (ROS) generation were assessed. Microscopic imaging of living exposed cells showed rapid uptake and subcellular cytoplasmic accumulation of AgNPs. Exposure to the tested AgNPs resulted in reduced overall viability. Influence of both size and surface coating (charge) was demonstrated, with the 20-nm-sized AgNPs and bovine serum albumin (BSA)-coated (negatively charged) AgNPs being slightly more toxic. On specific mechanisms of toxicity (TNF-α and ROS production) however, the AgNPs differed to a larger extent. The highest induction of TNF-α was found in cells exposed to the negatively charged AgNP_BSA, both sizes (80× higher than control). Reactive oxygen species induction was only significant with the 20 nm positively charged AgNP_Chit.

One-Pot Synthesis of Cationic Gold Nanoparticles by Differential Reduction

Abstract The size-controlled synthesis of cationic particles by differential reduction of HAuCl4 precursor in the presence of NaBH4 and 1-aminoundecane-12-thiol (AUT) is reported. The number of seed particles is determined by the fraction of the initially Au precursor reduced by NaBH4 present in the reaction mixture, which are then grown larger by the AUT, acting as both weak reducing agent and stabilizing surfactant. By this methodology, size controlled synthesis is achieved in a two-step one-pot synthesis at room temperature.

Modeling the Optical Responses of Noble Metal Nanoparticles Subjected to Physicochemical Transformations in Physiological Environments: Aggregation, Dissolution and Oxidation

Abstract Herein, we study how optical properties of colloidal dispersions of noble metal nanoparticles (Au and Ag) are affected by processes such as aggregation and oxidative dissolution. The optical contributions of these processes to the extinction spectra in the UV-vis region are often overlapped, making difficult its interpretation. In this regard, modeling the UV-vis spectra (in particular absorbance curve, peaks position, intensity and full width at half maximum -FWHM) of each process separately offers a powerful tool to identify the transformation of NPs under relevant and complex scenarios, such as in biological media. The proper identification of these transformations is crucial to understand the biological effects of the NPs.

Formation of the Protein Corona: The Interface between Nanoparticles and the Immune System

The interaction of inorganic nanoparticles and many biological fluids often withstands the formation of a Protein Corona enveloping the nanoparticle. This Protein Corona provides the biological identity to the nanoparticle that the immune system will detect. The formation of this Protein Corona depends not only on the composition of the nanoparticle, its size, shape, surface state and exposure time, but also on the type of media, nanoparticle to protein ratio and the presence of ions and other molecular species that interfere in the interaction between proteins and nanoparticles. This has important implications on immune safety, biocompatibility and the use of nanoparticles in medicine.

Intrinsic and Extrinsic Properties Affecting Innate Immune Responses to Nanoparticles: The Case of Cerium Oxide

We review the apparent discrepancies between studies that report anti-inflammatory effects of cerium oxide nanoparticles (CeO2 NPs) through their reactive oxygen species-chelating properties and immunological studies highlighting their toxicity. We observe that several underappreciated parameters, such as aggregation size and degree of impurity, are critical determinants that need to be carefully addressed to better understand the NP biological effects in order to unleash their potential clinical benefits. This is because NPs can evolve toward different states, depending on the environment where they have been dispersed and how they have been dispersed. As a consequence, final characteristics of NPs can be very different from what was initially designed and produced in the laboratory. Thus, aggregation, corrosion, and interaction with extracellular matrix proteins critically modify NP features and fate. These modifications depend to a large extent on the characteristics of the biological media in which the NPs are dispersed. As a consequence, when reviewing the scientific literature, it seems that the aggregation state of NPs, which depends on the characteristics of the dispersing media, may be more significant than the composition or original size of the NPs. In this work, we focus on CeO2 NPs, which are reported sometimes to be protective and anti-inflammatory, and sometimes toxic and pro-inflammatory.

Characterization of Nanoparticle Batch-To-Batch Variability

A central challenge for the safe design of nanomaterials (NMs) is the inherent variability of NM properties, both as produced and as they interact with and evolve in, their surroundings. This has led to uncertainty in the literature regarding whether the biological and toxicological effects reported for NMs are related to specific NM properties themselves, or rather to the presence of impurities or physical effects such as agglomeration of particles. Thus, there is a strong need for systematic evaluation of the synthesis and processing parameters that lead to potential variability of different NM batches and the reproducible production of commonly utilized NMs. The work described here represents over three years of effort across 14 European laboratories to assess the reproducibility of nanoparticle properties produced by the same and modified synthesis routes for four of the OECD priority NMs (silica dioxide, zinc oxide, cerium dioxide and titanium dioxide) as well as amine-modified polystyrene NMs, which are frequently employed as positive controls for nanotoxicity studies. For 46 different batches of the selected NMs, all physicochemical descriptors as prioritized by the OECD have been fully characterized. The study represents the most complete assessment of NMs batch-to-batch variability performed to date and provides numerous important insights into the potential sources of variability of NMs and how these might be reduced.