Jorg Schelfhout

A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering.

The combined potential of hydrogels and rapid prototyping technologies has been an exciting route in developing tissue engineering scaffolds for the past decade. Hydrogels represent to be an interesting starting material for soft, and lately also for hard tissue regeneration. Their application enables the encapsulation of cells and therefore an increase of the seeding efficiency of the fabricated structures. Rapid prototyping techniques on the other hand, have become an elegant tool for the production of scaffolds with the purpose of cell seeding and/or cell encapsulation. By means of rapid prototyping, one can design a fully interconnected 3-dimensional structure with pre-determined dimensions and porosity. Despite this benefit, some of the rapid prototyping techniques are not or less suitable for the generation of hydrogel scaffolds. In this review, we therefore give an overview on the different rapid prototyping techniques suitable for the processing of hydrogel materials. A primary distinction will be made between (i) laser-based, (ii) nozzle-based, and (iii) printer-based systems. Special attention will be addressed to current trends and limitations regarding the respective techniques. Each of these techniques will be further discussed in terms of the different hydrogel materials used so far. One major drawback when working with hydrogels is the lack of mechanical strength. Therefore, maintaining and improving the mechanical integrity of the processed scaffolds has become a key issue regarding 3-dimensional hydrogel structures. This limitation can either be overcome during or after processing the scaffolds, depending on the applied technology and materials.

Electromagnetic stimulation to optimize the bone regeneration capacity of gelatin-based cryogels

One of the key challenges in reconstructive bone surgery is to provide living constructs that possess the ability to integrate in the surrounding host tissue. Bone graft substitutes and biomaterials have already been widely used to heal critical-size bone defects due to trauma, tumor resection and tissue degeneration. In the present study, gelatin-based cryogels have been seeded with human SAOS-2 osteoblasts followed by the in vitro culture of the cells. In order to overcome the drawbacks associated with static culture systems, including limited diffusion and inhomogeneous cell-matrix distribution, the present work describes the application of a bioreactor to physically enhance the cell culture in vitro using an electromagnetic stimulus. The results indicate that the physical stimulation of cell-seeded gelatin-based cryogels upregulates the bone matrix production. We anticipate that the scaffolds developed consisting of human bone proteins and cells could be applied for clinical purposes related to bone repair.

Ultrasound stimulus to enhance the bone regeneration capability of gelatin cryogels

In the present study, gelatin-based cryogels have been seeded with human SAOS-2 osteoblasts. In order to overcome the drawbacks associated with in vitro culture systems, such as limited diffusion and inhomogeneous cell-matrix distribution, this work describes the application of ultrasounds (average power, 149 mW; frequency, 1.5 MHz) to physically enhance the cell culture in vitro. The results indicate that the physical stimulation of cell-seeded gelatin-based cryogels upregulates the bone matrix production.

Exploring the Future of Hydrogels in Rapid Prototyping: A Review on Current Trends and Limitations

The combined use of hydrogels and rapid prototyping techniques has been an exciting route in developing tissue engineering scaffolds for the past decade. Hydrogels tend to be an interesting starting material for soft, and lately even for hard, tissue regeneration. Their application enables the encapsulation of cells and therefore an increase of the seeding efficiency of the fabricated structures. Rapid prototyping techniques, on the other hand, have become an elegant tool for the production of scaffolds with the purpose of cell seeding and/or cell encapsulation. By means of rapid prototyping, one can design a fully interconnected 3-dimensional structure with predetermined dimensions and porosity. Despite this benefit, some of the rapid prototyping techniques are not or less suitable for the generation of hydrogel scaffolds. In this review, we therefore give an overview on the different rapid prototyping techniques suitable for the processing of hydrogel materials. A primary distinction is made between (1) laser-based, (2) nozzle-based and (3) printer-based systems. Special attention is given to current trends and limitations regarding the respective techniques.