Jorge Alberto Vieira Costa

The role of biochemical engineering in the production of biofuels from microalgae.

Environmental changes that have occurred due to the use of fossil fuels have driven the search for alternative sources that have a lower environmental impact. First-generation biofuels were derived from crops such as sugar cane, corn and soybean, which contribute to water scarcity and deforestation. Second-generation biofuels originated from lignocellulose agriculture and forest residues, however these needed large areas of land that could be used for food production. Based on technology projections, the third generation of biofuels will be derived from microalgae. Microalgae are considered to be an alternative energy source without the drawbacks of the first- and second-generation biofuels. Depending upon the growing conditions, microalgae can produce biocompounds that are easily converted into biofuels. The biofuels from microalgae are an alternative that can keep the development of human activity in harmony with the environment. This study aimed to present the main biofuels that can be derived from microalgae.

Simultaneous production of lipases and biosurfactants by submerged and solid-state bioprocesses.

Lipases and biosurfactants are compounds produced by microorganisms generally involved in the metabolization of oil substrates. However, the relationship between the production of lipases and biosurfactants has not been established yet. Therefore, this study aimed to evaluate the correlation between production of lipases and biosurfactants by submerged (SmgB) and solid-state bioprocess (SSB) using Aspergillus spp., which were isolated from a soil contaminated by diesel oil. SSB had the highest production of lipases, with lipolytic activities of 25.22U, while SmgB had 4.52U. The production of biosurfactants was not observed in the SSB. In the SmgB, correlation coefficients of 91% and 87% were obtained between lipolytic activity and oil in water and water in oil emulsifying activities, respectively. A correlation of 84% was obtained between lipolytic activity and reduction of surface tension in the culture medium. The surface tension decreased from 50 to 28mNm(-1) indicating that biosurfactants were produced in the culture medium.

Preparation of nanofibers containing the microalga Spirulina (Arthrospira)

Spirulina is a microalga which offers biological functions highly favorable for tissue engineering. Highly porous scaffolds can be produced by electrospinning containing biomass of Spirulina. The goal of this contribution was therefore to establish spinning conditions allowing to produce well defined nanofibers with diameters down to about 100 nm and to produce nanofibers with various concentration of the biomass for subsequent studies in tissue engineering applications. The experimental results reveal that the blend system PEO/biomass is behaved surprisingly well in electrospinning. Very thin bead-free nanofibers with diameters of about 110 nm can be produced for different biomass contents of up to 67 wt.% of the nanofibers and for PEO concentrations in the spinning solution well below 4 wt.%. These results suggest to us the use of the biomass containing nanofibers as extracellular matrices for stem cell culture and future treatment of spinal chord injury.

Chemical absorption and CO2 biofixation via the cultivation of Spirulina in semicontinuous mode with nutrient recycle

The chemical absorption of carbon dioxide (CO2) is a technique used for the mitigation of the greenhouse effect. However, this process consumes high amounts of energy to regenerate the absorbent and to separate the CO2. CO2 removal by microalgae can be obtained via the photosynthesis process. The objective of this study was to investigate the cultivation and the macromolecules production by Spirulina sp. LEB 18 with the addition of monoethanolamine (MEA) and CO2. In the cultivation with MEA, were obtained higher results of specific growth rate, biomass productivity, CO2 biofixation, CO2 use efficiency, and lower generation time. Besides this, the carbohydrate concentration obtained at the end of this assay was approximately 96.0% higher than the control assay. Therefore, Spirulina can be produced using medium recycle and the addition of MEA, thereby promoting the reduction of CO2 emissions and showing potential for areas that require higher concentrations of carbohydrates, such as in bioethanol production.

Utilization of simulated flue gas containing CO2, SO2, NO and ash for Chlorella fusca cultivation.

Microalgae can use the CO2 from coal power plants in their metabolic pathways. However, these microorganisms must be able to tolerate other residues produced from burning coal. This study evaluated the wastes addition (CO2, SO2, NO and ash) present in the flue gas from a coal power plant on the growth parameters during culture, CO2 biofixation and on the biomass characterization of Chlorella fusca LEB 111. The SO2 and NO injection (until 400ppm) in cultivations did not markedly affect CO2 biofixation by microalga. The best CO2 biofixation efficiency was obtained with 10% CO2, 200ppm SO2 and NO and 40ppm ash (50.0±0.8%, w w(-1)), showing a specific growth rate of 0.18±0.01 d(-1). The C. fusca LEB 111 biomass composition was similar in all experiments with around 19.7% (w w(-1)) carbohydrates, 15.5% (w w(-1)) lipids and 50.2% (w w(-1)) proteins.

Increase in the carbohydrate content of the microalgae Spirulina in culture by nutrient starvation and the addition of residues of whey protein concentrate

Non-renewable sources that will end with time are the largest part of world energy consumption, which emphasizes the necessity to develop renewable sources of energy. This necessity has created opportunities for the use of microalgae as a biofuel. The use of microalgae as a feedstock source for bioethanol production requires high yields of both biomass and carbohydrates. With mixotrophic cultures, wastewater can be used to culture algae. The aim of the study was to increase the carbohydrate content in the microalgae Spirulina with the additions of residues from the ultra and nanofiltration of whey protein. The nutrient deficit in the Zarrouk medium diluted to 20% and the addition of 2.5% of both residue types led to high carbohydrate productivity (60xa0mgxa0L(-1)xa0d(-1)). With these culture conditions, the increase in carbohydrate production in Spirulina indicated that the conditions were appropriate for use with microalgae as a feedstock in the production of bioethanol.

Development of a new nanofiber scaffold for use with stem cells in a third degree burn animal model.

The combination of mesenchymal stem cells (MSCs) and nanotechnology to promote tissue engineering presents a strategy for the creation of new substitutes for tissues. Aiming at the utilization of the scaffolds of poly-d,l-lactic acid (PDLLA) associated or not with Spirulina biomass (PDLLA/Sp) in skin wounds, MSCs were seeded onto nanofibers produced by electrospinning. These matrices were evaluated for morphology and fiber diameter by scanning electron microscopy and their interaction with the MSCs by confocal microscopy analysis. The biomaterials were implanted in mice with burn imitating skin defects for up to 7 days and five groups were studied for healing characteristics. The scaffolds demonstrated fibrous and porous structures and, when implanted in the animals, they tolerated mechanical stress for up to two weeks. Seven days after the induction of lesions, a similar presence of ulceration, inflammation and fibrosis among all the treatments was observed. No group showed signs of re-epithelization, keratinization or presence of hair follicles on the lesion site. In conclusion, although there was no microscopical difference among all the groups, it is possible that more prolonged analysis would show different results. Moreover, the macroscopic analysis of the groups with the scaffolds showed better cicatrization in comparison with the control group.

Spirulina cultivation with a CO2 absorbent: Influence on growth parameters and macromolecule production.

The objective of this study was to select a concentration of CO2 absorbents to supplement Spirulina sp. LEB 18 cultivation and to evaluate the effect of these compounds on the growth and production of macromolecules. Three initial biomass concentrations (X0), eight concentrations of monoethanolamine (MEA), and three NaOH concentrations were tested. The selected MEA concentrations did not inhibit the growth of Spirulina and doubled the dissolved inorganic carbon concentration in the assay medium in relation to the concentration of NaOH. The protein concentration in the biomass grown with MEA was, on average, 17% higher than that obtained with NaOH. Thus, it was found that MEA did not reduce the productivity of Spirulina sp. LEB 18, and its use can be further explored as a means for converting the carbon dissolved in the medium to biomolecules.

CO2 Biofixation by the Cyanobacterium Spirulina sp. LEB 18 and the Green Alga Chlorella fusca LEB 111 Grown Using Gas Effluents and Solid Residues of Thermoelectric Origin

The concentration of carbon dioxide (CO2) in the atmosphere has increased from 280 to 400 ppm in the last 10 years, and the coal-fired power plants are responsible for approximately 22 % of these emissions. The burning of fossil fuel also produces a great amount of solid waste that causes serious industrial and environmental problems. The biological processes become interesting alternative in combating pollution and developing new products. The objective of this study was to evaluate the CO2 biofixation potential of microalgae that were grown using gaseous effluents and solid residues of thermoelectric origin. The microalgae Chlorella fusca LEB 111 presented higher rate of CO2 biofixation (42.8 %) (p < 0.01) than did Spirulina sp. LEB 18. The values for the CO2 biofixation rates and the kinetic parameters of Spirulina and Chlorella cells grown using combustion gas did not differ significantly from those of cells grown using CO2 and a carbon source in the culture media. These microalgae could be grown using ash derived from coal combustion, using the minerals present in this residue as the source of the essential metals required for their growth and the CO2 derived from the combustion gas as their carbon source.

An Open Pond System for Microalgal Cultivation

Abstract Microalgal biomasses have a long history of industrial production for application in a variety of fields. The success of commercial large-scale production of microalgae depends on many factors, one which is the development of cost-effective systems. Open pond reactors are the most widely used system in large-scale microalgal cultivation due to their low cost of construction, maintenance, and operation. However, closed photobioreactors have a high photosynthetic efficiency and biomass productivity. This study presents the advantages and disadvantages of open ponds compared with other photobioreactors and examines the factors that affect the cultures and their bioproducts.