José A. Gómez-Tejedor

In Vivo Evaluation of 3-Dimensional Polycaprolactone Scaffolds for Cartilage Repair in Rabbits

Background Cartilage tissue engineering using synthetic scaffolds allows maintaining mechanical integrity and withstanding stress loads in the body, as well as providing a temporary substrate to which transplanted cells can adhere. Purpose This study evaluates the use of polycaprolactone (PCL) scaffolds for the regeneration of articular cartilage in a rabbit model. Study Design Controlled laboratory study. Methods Five conditions were tested to attempt cartilage repair. To compare spontaneous healing (from subchondral plate bleeding) and healing due to tissue engineering, the experiment considered the use of osteochondral defects (to allow blood flow into the defect site) alone or filled with bare PCL scaffold and the use of PCL-chondrocytes constructs in chondral defects. For the latter condition, 1 series of PCL scaffolds was seeded in vitro with rabbit chondrocytes for 7 days and the cell/scaffold constructs were transplanted into rabbits’ articular defects, avoiding compromising the subchondral bone. Cell pellets and bare scaffolds were implanted as controls in a chondral defect. Results After 3 months with PCL scaffolds or cells/PCL constructs, defects were filled with white cartilaginous tissue; integration into the surrounding native cartilage was much better than control (cell pellet). The engineered constructs showed histologically good integration to the subchondral bone and surrounding cartilage with accumulation of extracellular matrix including type II collagen and glycosaminoglycan. The elastic modulus measured in the zone of the defect with the PCL/cells constructs was very similar to that of native cartilage, while that of the pellet-repaired cartilage was much smaller than native cartilage. Conclusion The results are quite promising with respect to the use of PCL scaffolds as aids for the regeneration of articular cartilage using tissue engineering techniques.

Oscillations studied with the smartphone ambient light sensor

This paper makes use of a smartphones ambient light sensor to analyse a system of two coupled springs undergoing either simple or damped oscillatory motion. The period, frequency and stiffness of the spring, together with the damping constant and extinction time, are extracted from light intensity curves obtained using a free Android application. The results demonstrate the instructional value of mobile phone sensors as a tool in the physics laboratory.

Relationship between micro-porosity, water permeability and mechanical behavior in scaffolds for cartilage engineering

In tissue engineering the design and optimization of biodegradable polymeric scaffolds with a 3D-structure is an important field. The porous scaffold provide the cells with an adequate biomechanical environment that allows mechanotransduction signals for cell differentiation and the scaffolds also protect the cells from initial compressive loading. The scaffold have interconnected macro-pores that host the cells and newly formed tissue, while the pore walls should be micro-porous to transport nutrients and waste products. Polycaprolactone (PCL) scaffolds with a double micro- and macro-pore architecture have been proposed for cartilage regeneration. This work explores the influence of the micro-porosity of the pore walls on water permeability and scaffold compliance. A Poly(Vinyl Alcohol) with tailored mechanical properties has been used to simulate the growing cartilage tissue inside the scaffold pores. Unconfined and confined compression tests were performed to characterize both the water permeability and the mechanical response of scaffolds with varying size of micro-porosity while volume fraction of the macro-pores remains constant. The stress relaxation tests show that the stress response of the scaffold/hydrogel construct is a synergic effect determined by the performance of the both components. This is interesting since it suggests that the in vivo outcome of the scaffold is not only dependent upon the material architecture but also the growing tissue inside the scaffold׳s pores. On the other hand, confined compression results show that compliance of the scaffold is mainly controlled by the micro-porosity of the scaffold and less by hydrogel density in the scaffold pores. These conclusions bring together valuable information for customizing the optimal scaffold and to predict the in vivo mechanical behavior.

Time evolution of in vivo articular cartilage repair induced by bone marrow stimulation and scaffold implantation in rabbits.

Purpose Tissue engineering techniques were used to study cartilage repair over a 12-month period in a rabbit model. Methods A full-depth chondral defect along with subchondral bone injury were originated in the knee joint, where a biostable porous scaffold was implanted, synthesized of poly(ethyl acrylate-co-hydroxyethyl acrylate) copolymer. Morphological evolution of cartilage repair was studied 1 and 2 weeks, and 1, 3, and 12 months after implantation by histological techniques. The 3-month group was chosen to compare cartilage repair to an additional group where scaffolds were preseeded with allogeneic chondrocytes before implantation, and also to controls, who underwent the same surgery procedure, with no scaffold implantation. Results Neotissue growth was first observed in the deepest scaffold pores 1 week after implantation, which spread thereafter; 3 months later scaffold pores were filled mostly with cartilaginous tissue in superficial and middle zones, and with bone tissue adjacent to subchondral bone. Simultaneously, native chondrocytes at the edges of the defect started to proliferate 1 week after implantation; within a month those edges had grown centripetally and seemed to embed the scaffold, and after 3 months, hyaline-like cartilage was observed on the condylar surface. Preseeded scaffolds slightly improved tissue growth, although the quality of repair tissue was similar to non-preseeded scaffolds. Controls showed that fibrous cartilage was mainly filling the repair area 3 months after surgery. In the 12-month group, articular cartilage resembled the untreated surface. Conclusions Scaffolds guided cartilaginous tissue growth in vivo, suggesting their importance in stress transmission to the cells for cartilage repair.

Poly(ɛ-caprolactone) Electrospun Scaffolds Filled with Nanoparticles. Production and Optimization According to Taguchi's Methodology

Polycaprolactone (PCL) scaffolds were produced by electrospinning. Polymeric solutions in a mix of dichloromethane (DCM) and dimethylformamide were electrospun to form fibers in the sub-micron range. Physical properties of the PCL solutions were characterized with respect to density, viscosity, conductivity and surface tension. Processing was optimized following Taguchis methodology to select the set of processing parameters that resulted in producing fibers with the smallest diameters, minimum number of defects and with the narrowest distribution of fiber diameter. Morphology of electrospun fibers was qualitatively and quantitatively analyzed for the different sets of processing parameters. The optimum conditions found to electrospun PCL were used to process PCL solutions containing nanoparticles of hydroxyapatite (HA) or bioactive glass (BG). Bioactivity of nanocomposite electrospun membranes in simulated body fluid (SBF) was analyzed and biological response was tested by assessing proliferation and viability of MT3C3-E1 preosteoblasts cultured on PCL and its nanocomposite membranes.

Biointegration of corneal macroporous membranes based on poly(ethyl acrylate) copolymers in an experimental animal model.

Currently available keratoprosthesis models (nonbiological corneal substitutes) have a less than 75% graft survival rate at 2 years. We aimed at developing a model for keratoprosthesis based on the use of poly(ethyl acrylate) (PEA)-based copolymers, extracellular matrix-protein coating and colonization with adipose-derived mesenchymal stem cells. Human adipose tissue derived mesenchymal stem cells (h-ADASC) colonization efficiency of seven PEA-based copolymers in combination with four extracellular matrix coatings were evaluated in vitro. Then, macroporous membranes composed of the optimal PEA subtypes and coating proteins were implanted inside rabbit cornea. After a 3-month follow-up, the animals were euthanized, and the clinical and histological biointegration of the implanted material were assessed. h-ADASC adhered and survived when cultured in all PEA-based macroporous membranes. The addition of high hydrophilicity to PEA membranes decreased h-ADASC colonization in vitro. PEA-based copolymer containing 10% hydroxyethyl acrylate (PEA-HEA10) or 10% acrylic acid (PEA-AAc10) monomeric units showed the best cellular colonization rates. Collagen plus keratan sulfate-coated polymers demonstrated enhanced cellular colonization respect to fibronectin, collagen, or uncoated PEAs. In vivo implantation of membranes resulted in an extrusion rate of 72% for PEA, 50% for PEA-AAc10, but remarkably of 0% for PEA-HEA10. h-ADASC survival was demonstrated in all the membranes after 3 months follow-up. A slight reduction in the extrusion rate of h-ADASC colonized materials was observed. No significant differences between the groups with and without h-ADASC were detected respect to transparency or neovascularization. We propose PEA with low hydroxylation as a scaffold for the anchoring ring of future keratoprosthesis.

The N*(1520)->Delta pi amplitudes extracted from the gamma p->pi(+)pi(-)p reaction and comparison to quark models

Abstract The γp → π+π−p reaction, in combination with data from the πN → ππN reaction has been recently analyzed and allows one to obtain the s- and d-wave amplitudes for the N ∗ (1520) decay into Δπ with absolute sign with respect to the N ∗ (1520) → Nγ helicity amplitudes. In addition one obtains the novel information on the momentum dependence of the amplitudes. In the present paper we show how this new information poses new constraints to quark models of hadron structure. In particular we show that the signs and the momentum dependence of these amplitudes coincide with those given by non relativistic constituent quark models. The absolute values provided by these models agree only qualitatively, and a discussion is done on the reasons for it and possible ways to improve.

An experimental fatigue study of a porous scaffold for the regeneration of articular cartilage

The aim of this experimental study is to predict the long-term mechanical behavior of a porous scaffold implanted in a cartilage defect for tissue engineering purpose. Fatigue studies were performed by up to 100,000 unconfined compression cycles in a polycaprolactone (PCL) scaffold with highly interconnected pores architecture. The scaffold compliance, stress-strain response and hysteresis energy have been measured after different number of fatigue cycles, while the morphology has been observed by scanning electron microscopy at the same fatigue times. To simulate the growing tissue in the scaffold/tissue construct, the scaffold was filled with an aqueous solution of polyvinyl alcohol (PVA) and subjected to repeating cycles of freezing and thawing that increase the hydrogel stiffness. Fatigue studies show that the mechanical loading provokes failure of the dry scaffold at a smaller number of deformation cycles than when it is immersed in water, and also that 100,000 compressive dynamic cycles do not affect the scaffold/gel construct. This shows the stability of the scaffold implanted in a chondral defect and gives a realistic simulation of the mechanical performance from implantation of the empty scaffold to regeneration of the new tissue inside the scaffolds pores.

Implantation of a polycaprolactone scaffold with subchondral bone anchoring ameliorates nodules formation and other tissue alterations.

Purpose Articular cartilage has limited repair capacity. Two different implant devices for articular cartilage regeneration were tested in vivo in a sheep model to evaluate the effect of subchondral bone anchoring for tissue repair. Methods The implants were placed with press-fit technique in a cartilage defect after microfracture surgery in the femoral condyle of the knee joint of the sheep and histologic and mechanical evaluation was done 4.5 months later. The first group consisted of a biodegradable polycaprolactone (PCL) scaffold with double porosity. The second test group consisted of a PCL scaffold attached to a poly(L-lactic acid) (PLLA) pin anchored to the subchondral bone. Results For both groups most of the defects (75%) showed an articular surface that was completely or almost completely repaired with a neotissue. Nevertheless, the surface had a rougher appearance than controls and the repair tissue was immature. In the trials with solely scaffold implantation, severe subchondral bone alterations were seen with many large nodular formations. These alterations were ameliorated when implanting the scaffold with a subchondral bone anchoring pin. Discussions The results show that tissue repair is improved by implanting a PCL scaffold compared to solely microfracture surgery, and most importantly, that subchondral bone alterations, normally seen after microfracture surgery, were partially prevented when implanting the PCL scaffold with a fixation system to the subchondral bone.

Frequency analyser: A new Android application for high precision frequency measurement

We present Frequency Analyser, an AndroidTM application for measuring the fundamental frequency of a sound wave with very high precision in a frequency range between 100 Hz and 11 kHz. The application allows exporting the data of frequency as a function of time to an ASCII file. Several examples of application to Physics and Engineering teaching experiments are presented.