Jose E. Maté-Sánchez

Femtosecond laser microstructuring of zirconia dental implants

This study evaluated the suitability of femtosecond laser for microtexturizing cylindrical zirconia dental implants surface. Sixty-six cylindrical zirconia implants were used and divided into three groups: Control group (with no laser modification), Group A (microgropored texture), and Group B (microgrooved texture). Scanning electron microscopy observation of microgeometries revealed minimal collateral damage of the original surface surrounding the treated areas. Optical interferometric profilometry showed that ultrafast laser ablation increased surface roughness (R(a), R(q), R(z), and R(t)) significantly for both textured patterns from 1.2 x to 6 x-fold when compared with the control group (p < 0.005). With regard to chemical composition, microanalysis revealed a significant decrease of the relative content of contaminants like carbon (Control 19.7% ± 0.8% > Group B 8.4% ± 0.42% > Group A 1.6% ± 0.35%) and aluminum (Control 4.3% ± 0.9% > Group B 2.3% ± 0.3% > Group A 1.16% ± 0.2%) in the laser-treated surfaces (p < 0.005). X-ray diffraction and Raman spectra analysis were carried out to investigate any change in the crystalline structure induced by laser processing. The original predominant tetragonal phase of zirconia was preserved, whereas the traces of monoclinic phase present in the treated surfaces were reduced (Control 4.32% > Group A 1.94% > Group B 1.72%) as the surfaces were processed with ultrashort laser pulses. We concluded that femtosecond laser microstructuring offers an interesting alternative to conventional surface treatments of zirconia implants as a result of its precision and minimal damage of the surrounding areas.

Histomorphometric and mineral degradation study of Ossceram®: a novel biphasic B-tricalcium phosphate, in critical size defects in rabbits

OBJECTIVE To carry out a histomorphometric analysis of a new highly porous (95%) biphasic calcium phosphate (hydroxyapatite 60%/B-tricalcium phosphate 40%), used to fill critical size defects in rabbit tibiae, supplementing histomorphometric findings with radiographic thermal imaging, EDX analysis and Ca/P ratio mapping at different time stages. MATERIALS AND METHODS Two critical size defects of 6 mm diameter were created in both tibiae of 21 New Zealand rabbits, test group (Ossceram) and control group. Histomorphometric, radiographic thermal imaging, EDX and element mapping analysis were performed at 15, 30 and 60 days after graft insertion. RESULTS Histomorphometric analysis at 30 days showed more new bone formation in defects filled with Ossceram 4.41 ± 0.23 mm than the test group 1.94 ± 0. 28 mm (P<0.05). Element analysis revealed higher percentages of Ca (42.33 ± 2.8%) and P (1.3 ± 0.8%) in the test group than in the control group (P<0.05). Element mapping showed that Ca and P were concentrated in medullar and cortical zones in the test group but were concentrated only in cortical zones in the control group. Test group histomorphometry at 60 days showed complete closure of the cortical defect 5.37 ± 0.32 mm more than the control group 2.3 ± 0.54 mm. There was no cortical defect closure or medullar bone formation in the control group (P<0.05). Element analysis revealed higher percentages of Ca (32.26 ± 21.7%) and P (1.5 ± 0.3%) in the test group than in the control group (P<0.05). CONCLUSION Defects of a critical size in a rabbit tibia model can be sealed using a highly porous biphasic calcium phosphate; this supports new bone formation, creates a bridge between borders and facilitates bone ingrowth. Furthermore, this study observed partial dissolution of the mineral phase of the graft material and its incorporation into the surrounding bone. Radiographic thermal imaging may be used to supplement histological and chemical analyses.

Melatonin stimulates the growth of new bone around implants in the tibia of rabbits

Abstract:  This study evaluated the effect of the topical application of melatonin in accelerating bone formation associated with implants 2 months after their application to the tibiae of rabbits. Twenty New Zealand rabbits were used. Twenty implants treated with melatonin and 20 control implants without melatonin were placed in the proximal metaphyseal area of each tibia. Studies of new bone formation were subsequently made at 15, 30, 45 and 60 days. Cortical width and cortical length of new bone formation were measured. Following implantation, an anteroposterior and lateral radiologic study was carried out. Collected samples were sectioned at 5 μm and stained using hematoxylin–eosin, Masson’s trichromic and Gordon‐Switt reticulin stains. After a 60 day treatment period, melatonin increased the length of cortical bone (95.13 ± 0.42%) versus that around control implants (62.91 ± 1.45%). Related to the perimeter of cortical bone of the tibiae, melatonin induced new bone 88.35 ± 1.56% versus 60.20 ± 1.67% in the control implants. Melatonin regenerated the width and length of cortical bone around implants in tibiae of rabbits more quickly than around control implants without the addition of melatonin.

Effects of growth hormone on initial bone formation around dental implants: a dog study

OBJECTIVE The aim of this study was to evaluate the effects of topical application of growth hormone (GH) on the osteointegration of dental implants in dogs at 5 and 8 weeks after surgery. MATERIALS AND METHODS Mandibular premolars and molars were extracted from 12 Beagle dogs. Four screw implants were placed in each mandible. Before implant placement, 4 IU of GH were applied to the test sites (TS); no treatment was applied to control sites (CS). Morphometric parameters, bone-to-implant contact (BIC), peri-implant connective tissue, interthread bone and newly formed bone were measured. The Students t-test for was used for statistical analysis of data obtained. RESULTS After 5 weeks of treatment, BIC values varied slightly between 34.33 ± 2.35% (CS) and 35.76 ± 2.96% (TS). Interthread bone tissue was 64.08 ± 8.68 at CS and 72.86 ± 2.93 at TS, with statistical significance (P<0.05). Bone neoformation was 72.53 ± 4.54 at the CS and 80.74 ± 1.65 for the GH group, these being statistically significant differences (P<0.05). After 8 weeks, BIC had slightly increased for the GH group (36.47 ± 3.09 vs. 39.61 ± 2.34). Interthread bone was 80.57 ± 2.28 at the CS and 82.58 ± 2.44 at the GH site, which was statistically significant. Bone neoformation was 88.09 ± 1.38 at CS and 91.01 ± 1.52 at TS, showing statistical significance (P<0.05). CONCLUSION Topical application of 4 IU of GH like a biomimetic agent at the moment of implant placement has no significant effects on the BIC at 5 and 8 weeks, although bone neoformation and inter-thread bone values did increase significantly.

Porous titanium granules in critical size defects of rabbit tibia with or without membranes

Recently, porous titanium granules (PTGs) have been indicated for the preservation of the dimensions of post-extraction sockets, as a filler in sinus lift procedures and for the treatment of peri-implant and periodontal defects, based on the osteoconductivity and dimensional stability of the titanium granules. However, there is a lack of information regarding the use of this material in larger defects and in conjunction with membranes. The objective of this study is to test the behavior of PTGs used to fill critical size defects in rabbit tibiae, with and without membranes. Critical defects were created in both tibiae of rabbits, divided randomly into three groups: Group A (defect filled with PTG), Group B (defect filled with PTG+collagen membrane) and a control group (empty defect). After six weeks, histomorphometric analysis was performed. The results showed more defect closures at the cortical area (87.37%±2.2%) and more bone formation at the marrow area (57.6%±1.3%) in Group B, in comparison with the other groups (P<0.05); the use of membranes improved the material stability expressed as more percentages of the original material when membranes were used (P<0.05). Finally, inflammatory reactions were observed when the granules were not protected by membranes. In spite of the limitations of this animal study, it may be concluded that PTG particles are osteoconductive and allow bone growth. The PTG particles must be covered by a membrane, especially when grafting larger defects, in order to control particle migration, promote clot stabilization and separate the PTG graft from undesired soft tissue cells.

Histologic and histomorphometric behavior of microgrooved zirconia dental implants with immediate loading.

PURPOSE The study aims to assess the total soft tissue (ST) width, crestal bone level (CBL), bone-to-implant contact (BIC), and bone density (BD) for zirconia implants textured with microgrooved surfaces and immediately loaded. MATERIALS AND METHODS This study included 51 implants; one implant from each study group was retained for surface characterization. The 48 remaining implants were inserted randomly in premolar areas of both sides of the healed edentulous lower jaws of foxhound dogs. They were divided into three groups of 16: control (titanium); test A (zirconia), and test B (microgrooved zirconia). The implants were splinted and covered with an acrylic bridge. A split-mouth design was used and immediate occlusal loading was applied on one side, while the other side did not have occlusal contact. ST, CBL, BIC, and BD were evaluated after 3 months. The effects of immediate loading on these parameters were analyzed. RESULTS All the implants were osseointegrated. ST was established at 3 months with mean values of 2.9 ± 0.4 mm for all groups. No differences were appreciated between loaded and unloaded sides regarding ST (p > .05). CBL showed a mean of 1.2 ± 0.3 mm for all groups without differences between loaded and unloaded sides (p > .05). BIC percentages were significantly higher for loaded all-microgrooved implants (p < .05). BD percentages were higher in areas close to all-microgrooved implants (p < .05) and significantly higher for loaded implants than unloaded. CONCLUSIONS Within the limitations of the present study, it may be concluded that for zirconia dental implants with microgrooved surfaces and immediate loading, the thickness of STs remains stable resulting in 3 mm mean biologic width, that crestal bone preservation is related to insertion depth, and that higher BIC percentages and increased BD around implants microgrooved over the entire intraosseous area may be expected at 3 months following implant insertion and immediate loading.

Enhanced bone regeneration with a novel synthetic bone substitute in combination with a new natural cross‐linked collagen membrane: radiographic and histomorphometric study

OBJECTIVES 4Bone is a fully synthetic bioactive bone substitute composed of 60% hydroxyapatite (HA) and 40% beta-tricalcium phosphate (ß-TCP). This study aimed to investigate the effect of resorbable collagen membranes (RCM) on critical size defects in rabbit tibiae filled with this novel biphasic calcium phosphate at 15, 30, 45, and 60 days by radiological and histomorphometric analysis. MATERIAL AND METHODS Three critical size defects of 6 mm diameter were created in both tibiae of 20 New Zealand rabbits and divided into three groups according to the filling material: Group A (4Bone), Group B (4Bone plus RCM), and Group C (unfilled control group). At each of the four study periods, five rabbits were sacrificed. Anteroposterior and lateral radiographs were taken. Samples were processed for observation under light microscopy. RESULTS At the end of treatment, radiological analysis found that cortical defect closure was greater in Group B than Group A, and radiopacity was clearly lower and more heterogeneous in Group A cortical defects than in Group B. There was no cortical defect closure in Group C. Histomorphometric evaluation showed significant differences in newly formed bone and cortical closure in Group B compared with Groups A and C, with the presence of higher density newly formed bone in cortical and medullar zones. CONCLUSIONS Biphasic calcium phosphate functioned well as a scaffolding material allowing bone ingrowth and mineralization. The addition of absorbable collagen membranes enhanced bone gain compared with non-membrane-treated sites. This rabbit study provides radiological and histological evidence confirming the suitability of this new material for guided tissue regeneration of critical defects.

Novel hybrid drilling protocol: evaluation for the implant healing – thermal changes, crestal bone loss, and bone‐to‐implant contact

OBJECTIVES To evaluate a new hybrid drilling protocol, by the analysis of thermal changes in vitro, and their effects in the crestal bone loss and bone-to-implant contact in vivo. MATERIALS AND METHODS Temperature changes during simulated osteotomies with a hybrid drilling technique (biologic plus simplified) (test) versus an incremental drilling technique (control) were investigated. One hundred and twenty random osteotomies were performed (60 by group) in pig ribs up to 3.75-mm-diameter drill to a depth of 10 mm. Thermal changes and time were recorded by paired thermocouples. In a parallel experiment, bilateral mandibular premolars P2, P3, P4, and first molar M1 were extracted from six dogs. After 2-month healing, implant sites were randomly prepared using either of the drilling techniques. Forty eight implants of 3.75 mm diameter and 10 mm length were inserted. The dogs were euthanized at 30 and 90 days, and crestal bone loss (CBL) and bone-to-implant contact (BIC) were evaluated. RESULTS The control group showed maximum temperatures of 35.3 °C ± 1.8 °C, ΔT of 10.4 °C, and a mean time of 100 s/procedure; meanwhile, the test group showed maximum temperatures of 36.7 °C ± 1.2 °C, ΔT of 8.1 °C, and a mean time of 240 s/procedure. After 30 days, CBL values for both groups (test: 1.168 ± 0.194 mm; control: 1.181 ± 0.113 mm) and BIC values (test: 43 ± 2.8%; control: 45 ± 1.3%) were similar, without significant differences (P > 0.05). After 90 days, CBL (test: 1.173 ± 0.187 mm; control: 1.205 ± 0.122 mm) and BIC (test: 64 ± 3.3%; control: 64 ± 2.4%) values were similar, without significant differences (P > 0.05). The BIC values were increased at 90 days in both groups compared with the 30-day period (P < 0.05). CONCLUSIONS Within the limitations of this study, the new hybrid protocol for the preparation of the implant bed without irrigation, increase the temperature similarly to the incremental conventional protocol, and requires twice the time for the completion of the drilling procedure in vitro. Crestal bone loss and bone-to-implant contact in the hybrid drilling protocol are comparable with the conventional drilling protocol and do not affect the osseointegration process in vivo.

Xenografts Supplemented with Pamindronate placed in postextraction sockets to avoid crestal bone resorption. Experimental study in Fox hound dogs

OBJECTIVES The aim of the study was to compare the effects of porcine xenografts (MP3(®)) with or without pamindronate for the healing of small and large defects of postextraction sockets. MATERIALS AND METHODS Six beagle dogs were used in the study; second premolars and first molars of the mandible were extracted, small defects (SD) and large defects (LD) were identified. Each defect was measured and randomly filled as follows: SC (small control defects filled with MP3(®) alone), ST (small test defects filled with MP3(®) modified with pamindronate), LC (large control defects filled with MP3(®) alone), LT (large test defects filled with MP3(®) modified with pamindronate). After 4 and 8 weeks, the animals were euthanized and the percentages of new bone formation (NB), residual graft (RG) and connective tissue (CT) were analysed by histology and histomorphometry of undecalcified samples. RESULTS After 4 weeks, NB formation was higher for ST compared to all groups and for LT compared to LC (P < 0.05); RG was significantly higher in both control groups compared to tests (P < 0.05); and CT was higher in large defects (LC and LT) compared to small defects. After 8 weeks, NB formation was higher for test groups (ST and LT) compared to controls (P < 0.05); RG was significantly higher in both control groups compared to tests (P < 0.05); and CT was higher in large defects (LC and LT) compared to small defects (P < 0.05). CONCLUSIONS Within the limitations of this experimental study, the findings suggest that porcine xenografts modified with pamindronate favours the new bone formation and increased the porcine xenograft substitution/replacement after 4 and 8 weeks of healing.