José Eduardo Ferreira da Costa Gardolinski

Layered polymer-kaolinite nanocomposites

Kaolinite (K) was reacted with liquid dimethyl sulfoxide (DMSO) producing K(DMSO)0.4. Highly ordered polymer/kaolinite materials were obtained by displacement of DMSO molecules in the K(DMSO)0.4 intercalate by polyethylene oxide (PEO) or bacterial polyhydroxybutyrate (PHB), both in the melt state at 130°C and 180°C, respectively. The hybrid nanocomposites obtained were characterized by powder X-ray diffractometry (PXRD), Fourier Transform Infrared spectrometry (FTIR) and thermal analysis (simultaneous TG/DSC). The obtained results are consistent with the total replacement of DMSO molecules by the macromolecular linear chains that lie flat building a monolayer of the polymer in the interlayer space of kaolinite. The stoichiometry of the compounds estimated from the TG/DSC measurements are: K(DMSO)0.40±0.02, K(PHB)0.82±0.02, K(PEO)3.40±0.02.

Chemical modification of zinc hydroxide nitrate and Zn–Al-layered double hydroxide with dicarboxylic acids

A zinc hydroxide nitrate (ZHN), Zn5(OH)8(NO3)2.2H2O, and a layered double hydroxide (LDH), Zn/Al-NO3 were doped with 0.2 mol% of Cu2+ during alkaline chemical precipitation. Both compounds were intercalated with adipate ((-)OOC(CH2)4COO(-)), azelate ((-)OOC(CH2)7COO(-)), and benzoate (C6H5COO(-)) ions through ion exchange reactions. Solid state 13C nuclear magnetic resonance spectroscopy showed only one signal of carboxylic carbon for adipate and azelate intercalated into LDH, indicating that the carboxylic ends of both acids were equivalent, whereas the signal split when the intercalation was into the ZHN matrix. The electron paramagnetic resonance (EPR) spectrum of copper in octahedral cation sites of LDH layers showed a Hamiltonian parameter ratio g ||/A ||=170 cm and, after intercalation of adipate, the change was not significant: g ||/A ||=174 cm. This result indicates that the carboxylate ions did not coordinate with copper centers. Nonetheless, the intercalation of azelate increased the ratio to g ||/A ||=194 cm, similar to the spectra of ZHN modified with adipate, g ||/A ||=199 cm, and azelate, g ||/A ||=183 and 190 cm, which are associated with the coordination of copper by weak carboxylate anion ligands. Copper occupies octahedral or tetrahedral sites in ZHN layers, and the EPR spectra indicate that the dicarboxylate anions reacted preferentially with octahedral sites, whereas benzoate reacted with both sites.

Intercalation of anionic organic ultraviolet ray absorbers into layered zinc hydroxide nitrate.

Layered zinc hydroxide nitrate (ZHN) was synthesized and nitrate ions were topotactically exchanged with three different anionic species of commercial organic ultraviolet (UV) ray absorbers: 2-mercaptobenzoic acid, 2-aminobenzoic acid, and 4-aminobenzoic acid. The exchange reactions were confirmed by X-ray powder diffraction (XRPD), Fourier transform infrared spectroscopy (FTIR), ultraviolet visible (UV-Vis) spectroscopy, and thermal analysis (thermogravimetry, TGA, and differential thermal analysis, DTA). In all the anionic exchanged products, evidence of grafting of the organic species onto the inorganic matrix was obtained. In general, after intercalation/grafting, the UV absorption ability was improved in relation to the use of the parent organic material, showing that layered hydroxide salts (LHS) can be good alternative matrixes for the immobilization of organic species with UV-blocking properties in cosmetic products.

ESFOLIAÇÃO E HIDRATAÇÃO DA CAULINITA APÓS INTERCALAÇÃO COM URÉIA.

Well-ordered Georgia kaolinite (Kga-1b) obtained from the source Clay Repository of the Clay Minerals Society (USA) was intercalated with urea using grinding procedures. To achieve complete intercalation 20% of urea (in weight) was used, producing Al2Si2O5(OH)4 (N2H4CO)0,86 with an interplanar basal spacing of 1,08nm. After washing with water under ultrasound stirring at 363K, urea was completely removed and kaolinite was partially exfoliated. After drying under air, the material was converted to hydrated kaolinite with the composition Al2Si2O5(OH)4 (H2O)0,64 and an interplanar basal spacing of 0,84nm. In this compound, water molecules positioned between the layers of the silicate can be removed after calcination at 573K, regenerating structurally disordered kaolinite.

Intercalation of an oxalatooxoniobate complex into layered double hydroxide and layered zinc hydroxide nitrate.

A Zn/Al layered double hydroxide with molar ratio of 3 was prepared by coprecipitation in alkaline pH and used as a matrix to intercalate the ionic complex diaquadioxalatooxoniobate(V) (DDON), derived from NH(4)[NbO(C(2)O(4))(2)(H(2)O)(2)]2H(2)O. In a similar way, the layered zinc hydroxide nitrate, Zn(5)(OH)(8)(NO(3))(2)2H(2)O, was synthesized, preexpanded with azelate ions ((-)OOC(CH(2))(7)COO(-)), and then intercalated with the niobium complex. For both layered matrices, the results from X-ray powder diffractometry, Fourier transform infrared spectroscopy, and thermal analysis (TG/s-DTA) indicate the presence of the oxalate ion. In addition, results from X-ray photoelectron and Raman spectroscopy indicate the presence of the niobium center bonded to oxygen atoms. Finally, diffuse reflectance UV-vis spectroscopy suggests that the niobium centers are coordinated to oxalate ions. This is the first report of the intercalation of niobium into a layered matrix.

Comportamento térmico da caulinita hidratada

Well-ordered kaolinite from the Brazilian Amazon Region (State of Para) was initially reacted at 60 °C with a water dimethylsulfoxide mixture. After washing and characterisation, the resulting material was washed several times with methanol and in the final step with water. The water molecules displace the previously dimethylsulfoxide intercalated molecules and two different hydrated kaolinites were obtained. An unstable phase characterized by an interplanar basal distance of 0,996 nm that after drying collapse to the stable 0,844 nm hydrated kaolinite. The dehydration of the sample to disordered kaolinite was accompanied by Powder X-ray Diffractometry, thermal analysis (simultaneous TG and DSC) and FTIR spectroscopy.

Layered metal laurates as active catalysts in the methyl/ethyl esterification reactions of lauric acid

In this work we report the synthesis, characterization and investigation of the catalytic activity of layered copper(II), manganese(II), lanthanum(III) and nickel(II) laurates in the methyl and ethyl esterification reactions of lauric acid. In the methyl esterification, conversions between 80 and 90% were observed for all catalysts, while for the ethyl esterification only manganese laurate showed reasonable catalytic activity, with conversions close to 75%. Reuse of copper and lanthanum laurates in three cycles of reaction was also investigated and both catalysts preserved the structure and retained catalytic activity close to that observed for the first reaction cycle.