José M. Carbajo

Kraft pulp biobleaching using an extracellular enzymatic fluid produced by Pycnoporus sanguineus.

The aim of this work was to obtain a LMS pre-treatment applicable to industrial TCF bleaching. Kraft pulp from Eucalyptus globulus was treated at 40 degrees C/pH 3 and 60 degrees C/pH 5 for 1h using an extracellular fluid enriched in laccase produced by Pycnoporus sanguineus and acetosyringone as mediator (HBT was used as a control mediator) (L). Alkaline extraction (E) and hydrogen peroxide (P) stages were then assayed. The LEP alternative was an efficient sequence to bleach kraft pulp since the enzymatic pre-treatment boosted the subsequent chemical bleaching. The best L pre-treatment was obtained with laccase-acetosyringone at 40 degrees C/pH 3. It reduces kappa number and hexenuronic acids, increases pulp viscosity, lowers hydrogen peroxide consumption down to an 87.4% (94.0% without L) and enhances brightness up to a 59% ISO (51% ISO without L).

Characterization of purified bacterial cellulose focused on its use on paper restoration

Bacterial cellulose (BC) synthesized by Gluconacetobacter sucrofermentans CECT 7291 seems to be a good option for the restoration of degraded paper. In this work BC layers are cultivated and purified by two different methods: an alkaline treatment when the culture media contains ethanol and a thermal treatment if the media is free from ethanol. The main goal of these tests was the characterization of BC layers measured in terms of tear and burst indexes, optical properties, SEM, X-ray diffraction, FTIR, degree of polymerization, static and dynamic contact angles, and mercury intrusion porosimetry. The BC layers were also evaluated in the same terms after an aging treatment. Results showed that BC has got high crystallinity index, low internal porosity, good mechanical properties and high stability over time, especially when purified by the alkaline treatment. These features make BC an adequate candidate for degraded paper reinforcement.

Laccase production by Pycnoporus sanguineus under different culture conditions.

Pycnoporus sanguineus is a white‐rot fungus that produces ligninolytic enzymes such as laccases. These enzymes can endure temperatures as high as 60 °C and are useful for pulp bleaching, dye decolorization and phenolic degradation.

Combination of steam explosion and laccase-mediator treatments prior to Eucalyptus globulus kraft pulping.

The effect of a pretreatment consisting of steam explosion (SE) followed by a laccase mediator system (LMS) stage on Eucalyptus globulus kraft pulping has been evaluated and compared with fungal pretreatments. Pretreatment with SE and LMS was more efficient than pretreatments using Pycnoporus sanguineus and Trametes sp. I-62. Steam explosion not only improved the enzyme penetration into the wood chips and shortened the pulping process by 60%, but also extracted around 50% of the hemicelluloses which could be converted into value-added products. The optimal conditions for the LMS treatment were 3h, 3UA/g and 40°C. Compared to SE, the SE/LMS treatment yielded an increase in delignification of 13.9% without affecting pulp properties, provided a similar screened kraft yield, and reduced consumption of chemical reagents Na(2)S and NaOH by 11.5% and 6.3%, respectively. Therefore, SE/LMS is a promising pretreatment for converting the pulp mill into a forest bio-refinery.

Use of bacterial cellulose in degraded paper restoration. Part II: application on real samples

Preservation of documentary heritage is one of the biggest challenges facing paper conservators today. The singular properties of bacterial cellulose (BC) lead us to propose to reinforce paper with BC sheets. In the first part of this study, the reinforcing capability of BC was tested on model papers of well-known fiber composition. The aim of the present study was to verify the suitability of rebuilding degraded old papers with BC. The degraded papers were characterized before and after the reinforcement. In addition, lined samples were characterized before and after an aging process in order to study the stability in time. The same methodology was used with Japanese paper (JP), a material commonly used by paper conservators, in order to compare both materials as reinforcement. Mechanical properties of paper lined with BC are as good as those obtained with JP. Papers lined with BC have more marked modifications on their optical properties than those restored with JP. Nevertheless, letters in books lined with BC are more legible. Moreover, only the papers restored with BC show high changes in porosity. The aging process leads to a slight decrement in burst index. Changes on tear index and optical properties with the aging process depend on the paper to be restored. This study suggests that BC improves deteriorated paper quality, without altering the information contained therein, and that this improvement is maintained over time. Hence, BC is a promising alternative material for the restoration of paper.

Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR FT-IR) Applied to Study the Distribution of Ink Components in Printed Newspapers.

A new method was developed to study how the oil and cyan pigments of cold-set ink are distributed in newspaper thickness. The methodology involved laboratory printing followed by delamination of the printed paper. The unprinted side, printed side, and resulting layers were analyzed using attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR). Three commercial newspapers and black and cyan cold-set inks were chosen for the study. Attenuated total reflection Fourier transform infrared spectroscopy enabled the proportion of oil and cyan pigment on the printed surface and throughout the sheet thickness to be measured. Oil percentage was evaluated as the area increment of the region from 2800 cm−1 to 3000 cm−1. The relative amount of cyan pigment was determined as the area of the absorption band at 730 cm−1. The ink oil was found mainly below half the paper thickness, whereas the pigment was detected at the layers closer to the printed surface, at a depth penetration of less than 15 µm (20% of thickness). Distribution of these two components in paper thickness depended on the type of cold-set ink, the amount of ink transferred, and the newspaper properties.

Modification of Bacterial Cellulose Biofilms with Xylan Polyelectrolytes

The effect of the addition of two [4-butyltrimethylammonium]-xylan chloride polyelectrolytes (BTMAXs) on bacterial cellulose (BC) was evaluated. The first strategy was to add the polyelectrolytes to the culture medium together with a cell suspension of the bacterium. After one week of cultivation, the films were collected and purified. The second approach consisted of obtaining a purified and homogenized BC, to which the polyelectrolytes were added subsequently. The films were characterized in terms of tear and burst indexes, optical properties, surface free energy, static contact angle, Gurley porosity, SEM, X-ray diffraction and AFM. Although there are small differences in mechanical and optical properties between the nanocomposites and control films, the films obtained by BC synthesis in the presence of BTMAXs were remarkably less opaque, rougher, and had a much lower specular gloss. The surface free energy depends on the BTMAXs addition method. The crystallinity of the composites is lower than that of the control material, with a higher reduction of this parameter in the composites obtained by adding the BTMAXs to the culture medium. In view of these results, it can be concluded that BC–BTMAX composites are a promising new material, for example, for paper restoration.