José M. Seguí-Simarro

Electron Tomographic Analysis of Somatic Cell Plate Formation in Meristematic Cells of Arabidopsis Preserved by High-Pressure Freezing

We have investigated the process of somatic-type cytokinesis in Arabidopsis (Arabidopsis thaliana) meristem cells with a three-dimensional resolution of ∼7 nm by electron tomography of high-pressure frozen/freeze-substituted samples. Our data demonstrate that this process can be divided into four phases: phragmoplast initials, solid phragmoplast, transitional phragmoplast, and ring-shaped phragmoplast. Phragmoplast initials arise from clusters of polar microtubules (MTs) during late anaphase. At their equatorial planes, cell plate assembly sites are formed, consisting of a filamentous ribosome-excluding cell plate assembly matrix (CPAM) and Golgi-derived vesicles. The CPAM, which is found only around growing cell plate regions, is suggested to be responsible for regulating cell plate growth. Virtually all phragmoplast MTs terminate inside the CPAM. This association directs vesicles to the CPAM and thereby to the growing cell plate. Cell plate formation within the CPAM appears to be initiated by the tethering of vesicles by exocyst-like complexes. After vesicle fusion, hourglass-shaped vesicle intermediates are stretched to dumbbells by a mechanism that appears to involve the expansion of dynamin-like springs. This stretching process reduces vesicle volume by ∼50%. At the same time, the lateral expansion of the phragmoplast initials and their CPAMs gives rise to the solid phragmoplast. Later arriving vesicles begin to fuse to the bulbous ends of the dumbbells, giving rise to the tubulo-vesicular membrane network (TVN). During the transitional phragmoplast stage, the CPAM and MTs disassemble and then reform in a peripheral ring phragmoplast configuration. This creates the centrifugally expanding peripheral cell plate growth zone, which leads to cell plate fusion with the cell wall. Simultaneously, the central TVN begins to mature into a tubular network, and ultimately into a planar fenestrated sheet (PFS), through the removal of membrane via clathrin-coated vesicles and by callose synthesis. Small secondary CPAMs with attached MTs arise de novo over remaining large fenestrae to focus local growth to these regions. When all of the fenestrae are closed, the new cell wall is complete. Few endoplasmic reticulum (ER) membranes are seen associated with the phragmoplast initials and with the TVN cell plate that is formed within the solid phragmoplast. ER progressively accumulates thereafter, reaching a maximum during the late PFS stage, when most cell plate growth is completed.

Human papillomavirus L1 protein expressed in tobacco chloroplasts self-assembles into virus-like particles that are highly immunogenic.

Cervical cancer is the second most prevalent cancer in women worldwide. It is linked to infection with human papillomavirus (HPV). As the virus cannot be propagated in culture, vaccines based on virus-like particles have been developed and recently marketed. However, their high costs constitute an important drawback for widespread use in developing countries, where the incidence of cervical cancer is highest. In a search for alternative production systems, the major structural protein of the HPV-16 capsid, L1, was expressed in tobacco chloroplasts. A very high yield of production was achieved in mature plants (approximately 3 mg L1/g fresh weight; equivalent to 24% of total soluble protein). This is the highest expression level of HPV L1 protein reported in plants. A single mature plant synthesized approximately 240 mg of L1. The chloroplast-derived L1 protein displayed conformation-specific epitopes and assembled into virus-like particles, visible by transmission electron microscopy. Furthermore, leaf protein extracts from L1 transgenic plants were highly immunogenic in mice after intraperitoneal injection, and neutralizing antibodies were detected. Taken together, these results predict a promising future for the development of a plant-based vaccine against HPV.

Cell cycle-dependent changes in Golgi stacks, vacuoles, clathrin-coated vesicles and multivesicular bodies in meristematic cells of Arabidopsis thaliana : A quantitative and spatial analysis

Cytokinesis in plants involves both the formation of a new wall and the partitioning of organelles between the daughter cells. To characterize the cellular changes that accompany the latter process, we have quantitatively analyzed the cell cycle-dependent changes in cell architecture of shoot apical meristem cells of Arabidopsis thaliana. For this analysis, the cells were preserved by high-pressure freezing and freeze-substitution techniques, and their Golgi stacks, multivesicular bodies, vacuoles and clathrin-coated vesicles (CCVs) characterized by means of serial thin section reconstructions, stereology and electron tomography techniques. Interphase cells possess ∼35 Golgi stacks, and this number doubles during G2 immediately prior to mitosis. At the onset of cytokinesis, the stacks concentrate around the periphery of the growing cell plate, but do not orient towards the cell plate. Interphase cells contain ∼18 multivesicular bodies, most of which are located close to a Golgi stack. During late cytokinesis, the appearance of a second group of cell plate-associated multivesicular bodies coincides with the onset of CCV formation at the cell plate. During this period a 4× increase in CCVs is paralleled by a doubling in number and a 4× increase in multivesicular bodies volume. The vacuole system also undergoes major changes in organization, size, and volume, with the most notable change seen during early telophase cytokinesis. In particular, the vacuoles form sausage-like tubular compartments with a 50% reduced surface area and an 80% reduced volume compared to prometaphase cells. We postulate that this transient reduction in vacuole volume during early telophase provides a means for increasing the volume of the cytosol to accommodate the forming phragmoplast microtubule array and associated cell plate-forming structures.

How microspores transform into haploid embryos: changes associated with embryogenesis induction and microspore-derived embryogenesis.

Microspore embryogenesis is the most powerful androgenic pathway to produce haploid and doubled haploid plants. To deviate a microspore toward embryogenesis, a number of factors, different for each species, must concur at the same time and place. Once induced, the microspore undergoes numerous changes at different levels, from overall morphology to gene expression. Induction of microspore embryogenesis not only implies the expression of an embryogenic program, but also a stress-related cellular response and a repression of the gametophytic program to revert the microspore to a totipotent status. In this review, we compile the most recent advances in the understanding of the changes undergone by the induced microspore to readapt to the new developmental scenario. We devote special attention to the efforts made to uncover changes in the transcriptome of the induced microspore and microspore-derived embryo (MDE). Finally, we discuss the influence that an in vitro environment exerts over the MDE, as compared with its zygotic counterpart.

Quantitative analysis of changes in spatial distribution and plus-end geometry of microtubules involved in plant-cell cytokinesis

The cell plate of higher plants is formed within a ribosome-excluding cell plate assembly matrix. Phragmoplast microtubules facilitate cell-plate formation by forming a scaffold that directs Golgi-derived vesicles to the forming cell plate. Here, we analyse the effects of the cell-plate assembly matrix on phragmoplast microtubule plus-end geometry by electron tomography of cryogenically fixed Arabidopsis meristem cells. Five distinct microtubules plus-end geometries are seen - blunt, extended, horned, flared and hybrid extended/horned. We have quantified and mapped these types of plus-end morphology during the different stages of cell-plate formation and analysed the effects of cell-plate assembly matrix association on microtubule plus-end morphologies. Our results show that somatic-type phragmoplast microtubules do not interdigitate at the cell plate mid-line. The cell-plate assembly matrix is shown to stabilize microtubule plus ends, as evidenced by the fact that of these microtubules that do not terminate in such a matrix, 40-80% are horn-shaped (shrinking), whereas of those that end in such a matrix, 50-70% are blunt (metastable). Also, a third of the blunt-ended microtubules within the cell-plate assembly matrix end at a distance of ∼30 nm from the cell plate.

SCD1 is required for cell cytokinesis and polarized cell expansion in Arabidopsis thaliana

In the leaf epidermis, guard mother cells undergo a stereotyped symmetric division to form the guard cells of stomata. We have identified a temperature-sensitive Arabidopsis mutant, stomatal cytokinesis-defective 1-1 (scd1-1), which affects this specialized division. At the non-permissive temperature, 22°C, defective scd1-1 guard cells are binucleate, and the formation of their ventral cell walls is incomplete. Cytokinesis was also disrupted in other types of epidermal cells such as pavement cells. Further phenotypic analysis of scd1-1 indicated a role for SCD1 in seedling growth, root elongation and flower morphogenesis. More severe scd1 T-DNA insertion alleles (scd1-2 and scd1-3) markedly affect polar cell expansion, most notably in trichomes and root hairs. SCD1 is a unique gene in Arabidopsis that encodes a protein related to animal proteins that regulate intracellular protein transport and/or mitogen-activated protein kinase signaling pathways. Consistent with a role for SCD1 in membrane trafficking, secretory vesicles were found to accumulate in cytokinesis-defective scd1 cells. In addition the scd1 mutant phenotype was enhanced by low doses of inhibitors of cell plate consolidation and vesicle secretion. We propose that SCD1 functions in polarized vesicle trafficking during plant cytokinesis and cell expansion.

The Mitochondrial Cycle of Arabidopsis Shoot Apical Meristem and Leaf Primordium Meristematic Cells Is Defined by a Perinuclear Tentaculate/Cage-Like Mitochondrion

Plant cells exhibit a high rate of mitochondrial DNA (mtDNA) recombination. This implies that before cytokinesis, the different mitochondrial compartments must fuse to allow for mtDNA intermixing. When and how the conditions for mtDNA intermixing are established are largely unknown. We have investigated the cell cycle-dependent changes in mitochondrial architecture in different Arabidopsis (Arabidopsis thaliana) cell types using confocal microscopy, conventional, and three-dimensional electron microscopy techniques. Whereas mitochondria of cells from most plant organs are always small and dispersed, shoot apical and leaf primordial meristematic cells contain small, discrete mitochondria in the cell periphery and one large, mitochondrial mass in the perinuclear region. Serial thin-section reconstructions of high-pressure-frozen shoot apical meristem cells demonstrate that during G1 through S phase, the large, central mitochondrion has a tentaculate morphology and wraps around one nuclear pole. In G2, both types of mitochondria double their volume, and the large mitochondrion extends around the nucleus to establish a second sheet-like domain at the opposite nuclear pole. During mitosis, approximately 60% of the smaller mitochondria fuse with the large mitochondrion, whose volume increases to 80% of the total mitochondrial volume, and reorganizes into a cage-like structure encompassing first the mitotic spindle and then the entire cytokinetic apparatus. During cytokinesis, the cage-like mitochondrion divides into two independent tentacular mitochondria from which new, small mitochondria arise by fission. These cell cycle-dependent changes in mitochondrial architecture explain how these meristematic cells can achieve a high rate of mtDNA recombination and ensure the even partitioning of mitochondria between daughter cells.

Overexpression of plastidial thioredoxin f leads to enhanced starch accumulation in tobacco leaves

Starch, the most abundant storage carbohydrate in plants, has been a major feedstock for first-generation biofuels. Growing fuel demands require, however, that the starch yields of energy crops be improved. Leaf starch is synthesised during the day and degraded at night to power nonphotosynthetic metabolism. Redox regulation has been associated with the coordination of the enzymes involved in starch metabolism, but neither the signals nor mechanisms that regulate this metabolism are entirely clear. In this work, the thioredoxin (Trx) f and m genes, which code for key enzymes in plastid redox regulation, were overexpressed from the plastid genome. Tobacco plants overexpressing Trx f, but not Trx m, showed an increase of up to 700% in leaf starch accumulation, accompanied by an increase in leaf sugars, specific leaf weight (SLW), and leaf biomass yield. To test the potential of these plants as a nonfood energy crop, tobacco leaves overexpressing Trx f were subjected to enzymatic hydrolysis, and around a 500% increase in the release of fermentable sugars was recorded. The results show that Trx f is a more effective regulator of photosynthetic carbon metabolism in planta than Trx m. The overexpression of Trx f might therefore provide a means of increasing the carbohydrate content of plants destined for use in biofuel production. It might also provide a means of improving the nutritional properties of staple food crops.

Androgenesis in recalcitrant solanaceous crops

Tomato, eggplant, and pepper are three solanaceous crops of outstanding importance worldwide. For hybrid seed production in these species, a fast and cheap method to obtain pure (homozygous) lines is a priority. Traditionally, pure lines are produced by classical inbreeding and selection techniques, which are time consuming (several years) and costly. Alternatively, it has become possible to accelerate the production of homozygous lines through a biotechnological approach: the induction of androgenesis to generate doubled haploid (homozygous) plants. This biotechnological in vitro tool reduces the process to only one generation, which implies important time and costs savings. These facts make androgenic doubled haploids the choice in a number of important crops where the methodology is well set up. Unfortunately, recalcitrant solanaceous crops such as tomato, eggplant, and pepper are still far from an efficient and reliable technology to be applied on a routine basis to different genotypes in breeding programs. In eggplant and pepper, only anther cultures are known to work relatively well. Unfortunately, a more efficient and promising technique, the culture of isolated microspores, is not sufficiently developed yet. In tomato, none of these methods is available nowadays. However, recent advances in the knowledge of embryo development are filling the gaps and opening new ways to achieve the final goal of an efficient protocol in these three recalcitrant species. In this review, we outline the state of the art on androgenic induction in tomato, eggplant, and pepper, and postulate new experimental ways in order to overcome current limitations.

Pathways to doubled haploidy: chromosome doubling during androgenesis.

Production of doubled haploid (DH) plants through androgenesis induction is a promising and convenient alternative to conventional selfing techniques for the generation of pure lines for breeding programs. This process comprises two main steps: induction of androgenesis and duplication of the haploid genome. Such duplication is sometimes indirectly induced by the treatments used to promote androgenic development. But usually, an additional step of direct chromosome doubling must be included in the protocol. Duplication of the haploid genome of androgenic individuals has been thought to occur through three mechanisms: endoreduplication, nuclear fusion and c-mitosis. In this review we will revise and analyze the evidences supporting each of the proposed mechanisms and their relevance during androgenesis induction, embryo/callus development and plant regeneration. Special attention will be devoted to nuclear fusion, whose evidences are accumulating in the last years.