José Roberto Vanni

Histological evaluation of the effectiveness of increased apical enlargement for cleaning the apical third of curved canals

OBJECTIVE To evaluate the influence of apical size on cleaning of the apical third of curved canals prepared with rotary instruments. METHODOLOGY Forty-four mesiobuccal canals of maxillary molars teeth were instrumented to different apical sizes (30, 0.02; 35, 0.02; 40, 0.02; 45, 0.02) using a crown-down technique. After canal preparation, the apical thirds of the roots were submitted to histological processing and examination. The specimens were analysed at 40× magnification and the images were submitted to morphometric analysis with an integration grid to evaluate the percentage of debris and uninstrumented root canal walls. The action of the instruments on the root canal walls was assessed based on the surface regularity, abrupt change on the continuity of root canal walls, and partial or total pre-dentine removal. The results were statistically compared using one-way anova with post hoc Tukey test. Pearsons correlation was performed to identify potential correlations between values. RESULTS The percentage of uninstrumented root canal dentine was higher when apical enlargement was performed with instruments 30, 0.02 taper (55.64 ± 4.62%) and 35, 0.02 taper (49.03 ± 5.70%) than with instruments 40, 0.02 taper (38.08 ± 10.44%) and 45, 0.02 taper (32.65 ± 8.51%) (P < 0.05). More debris were observed when apical enlargement was performed with instruments 30, 0.02 taper (34.62 ± 9.49%) and 35, 0.02 taper (25.33 ± 7.37%) (P < 0.05). There was a significant correlation between the amount of remaining debris and the perimeter of uninstrumented root canal dentine (r = 0.9130, P < 0.001). CONCLUSION No apical enlargement size allowed the root canal walls to be prepared completely. Apical third cleanliness could be predicted by instrument diameter.

Microbial leakage and apical inflammatory response in dog's teeth after root canal filling with different sealers, post space preparation and exposure to the oral environment

Coronal leakage is an important factor affecting the outcome of endodontic therapy. This study evaluated the microbial leakage (ML) and the apical inflammatory response (AIR) in dog’s teeth after root canal filling with three endodontic sealers, post preparation and exposure to the oral environment, testing the hypothesis that there is a positive correlation between these two histological parameters (ML and AIR). Sixty-four root canals of 8 mongrel dogs were cleaned, shaped and randomly distributed into groups according to the sealer to be used: Sealer 26 (n=18); AH Plus (n=18); RoekoSeal (n=19); no sealer – control group (n=9). Root canals were filled by the lateral condensation technique. Post space preparation left 4 mm of filling material in the apical root third, and specimens were exposed to the oral environment for 90 days. The dogs were killed and jaw blocks were histologically processed using Brown & Brenn and HE staining techniques. ML and AIR were scored from 1 to 4. Results were analyzed statistically using ANOVA, Duncan’s post-hoc test and Spearman’s correlation. ML and AIR score means were: Sealer 26 - 2.44±0.98 and 2.50±0.70; AH Plus - 2.50±0.78 and 2.22±0.54; RoekoSeal - 1.84±0.95 and 2.63±0.83; Control - 2.56±1.23 and 3.11±0.60. Statistically significant differences in AIR scores were found between the AH Plus and control groups (p<0.05). Although RoekoSeal had the lowest ML means, and AH Plus, the lowest AIR means after 90-day exposure to the oral environment, no statistically significant differences were found between the three sealers under study, and no correlation was found between ML and AIR.

Influence of protaper finishing files and sodium hypochlorite on cleaning and shaping of mandibuldar central incisors - a histological analysis

Objective: This study investigated the influence of the last apical instrument of the ProTaper system with and without 2.5% sodium hypochlorite for cleaning mandibular central incisors. Material and Methods: Thirty two mandibular central incisors were divided into six study groups: Group I – F1 instrument with 2.5% sodium hypochlorite; Group II – F1 and F2 with 2.5% sodium hypochlorite; Group III – F1, F2 and F3 with 2.5% sodium hypochlorite; Group IV – F1 with distilled water; Group V – F1 and F2 with distilled water; Group VI – F1, F2 and F3 with distilled water. The two remaining teeth comprised the negative control group. The specimens were prepared following the principles of the technique suggested by the manufacturer and then submitted to histological preparation and morphometric analysis. Data were analyzed statistically by the Kruskal Wallis test at 1% significance level. Results: There was statistically significant difference (p<0.01) between all study groups, except between Groups I and VI. Conclusions: It was concluded that no technique allowed complete cleaning of the root canals. However, the technique of finishing preparation of the apical third with the F3 instrument with 2.5% sodium hypochlorite irrigation was the most effective.

Influence of different methods of cervical flaring on establishment of working length

Objective: to investigate the influence of three different rotary systems for cervical flaring on establishment of the real working length. Material and methods: Thirty mandibular first molars were submitted to conventional endodontic access and initial working length measurement, followed by irrigation/suction of the pulp chamber with 5% sodium hypochlorite. Teeth were randomly divided into 3 groups (n=10) and cervical flaring of the mesiobuccal canals were performed using one of the following instrument systems: Group 1 – Gates-Glidden burs; Group 2 – Orifice Openers; Group 3 – La Axxess system. Two subsequent numbers of instruments of each rotary system were used and the final working length was recorded. A digital calyper was used to record the working length, in millimeters, to investigate a possible discrepancy between initial and final measurements. Results: Analysis of variance (Anova) na Tukey test revealed statistical difference between Group 1 and Groups 2 and 3 (p£ 0.05). Conclusions: all groups presented shorter working length after cervical flaring; groups prepared with instruments La Axxes and Orifice Opener presented the best results among the systems studied.

CT evaluation of apical canal transportation associated with stainless steel hand files, oscillatory technique and ProTaper rotary system

This study used computed tomography (CT) to compare apical canal transportation in mesiobuccal canals of maxillary molars prepared with different techniques. Sixty teeth were assigned to 3 groups (n=20), according to the technique used for root canal instrumentation: hand instrumentation with K-Flexofiles, K-Flexofiles activated by an oscillatory system and ProTaper NiTi rotary system. Pre and post-instrumentation CT images were obtained 3 mm short of the apical foramen and were superimposed to compare canal transportation. Data were analyzed statistically by ANOVA and Tukeys test using the SPSS software (α=0.05). In the buccal direction, the manual technique produced significantly less canal transportation than the oscillatory technique (p<0.05) and both were similar to the rotary technique (p>0.05). In the distal and distopalatal directions, the oscillatory technique produced more canal transportation (p<0.05). In the mesiopalatal direction, the oscillatory technique produced more canal transportation than the manual technique (p<0.05), and both were similar to the rotary technique (p>0.05). In conclusion, all techniques produced canal transportation, and the oscillatory technique produced the greatest removal of root dentin toward the innerside of the root curvature.

In vitro comparative study of manual and mechanical rotary instrumentation of root canals using computed tomography

This in vitro study compared, using computed tomography (CT), the amount of dentin removed from root canal walls by manual and mechanical rotary instrumentation techniques. Forty mandibular incisors with dental crown and a single canal were selected. The teeth were randomly assigned to two groups, according to the technique used for root canal preparation: Group I - manual instrumentation with stainless steel files; Group II - mechanical instrumentation with RaCe rotary nickel-titanium instruments. In each tooth, root dentin thickness of the buccal, lingual, mesial and distal surfaces in the apical, middle and cervical thirds of the canal was measured (in mm) using a multislice CT scanner (Siemens Emotion, Duo). Data were stored in the SPSS v. 11.5 and SigmaPlot 2001 v. 7.101 softwares. After crown opening, working length was determined, root canals were instrumented and new CT scans were taken for assessment of root dentin thickness. Pre- and post-instrumentation data were compared and analyzed statistically by ANOVA and Tukeys post-hoc test for significant differences (p=0.05). Based on the findings of this study, it may be concluded that regarding dentin removal from root canal walls during instrumentation, neither of the techniques can be considered more effective than the other.

Flexibility of K3 and ProTaper universal instruments

This study used a mechanical test to evaluate the flexibility of instruments from the K3 (conicity 0.04) and the ProTaper Universal systems when they were new and after 5 uses in simulated canals. Five sets of instruments of each system were tested: K3 (15, 20, 25, 30, 35, 40 and 45) and ProTaper Universal (S1, S2, F1, F2, F3, F4 and F5). Each set of instruments was used to prepare a simulated canal and the same set of instruments was used 5 times (50 canals). The number of each subgroup represented the number of uses: 0 (control), 1, 3 and 5 uses. Before and after each use, the instruments were submitted to a mechanical flexibility test performed in a Versat 502 universal testing machine. Interactions between the instrument and the number of uses were analyzed by ANOVA and Tukeys test at a 5% level of significance. Instruments from both systems presented lower flexibility after the third use compared to the flexibility obtained after uses 0 and 1 (p<0.05), and maintained the same flexibility after the fifth use. The flexibility of instruments from the K3 system decreased with the increase of diameter, irrespective of the number of uses. Among the instruments from the ProTaper Universal system, the shaping files presented greater flexibility than the finishing files. F2 and F3 were the least flexible instruments, and F4 and F5 presented flexibility values similar to those of F1.

In vivo analysis of post space sealing with different adhesive materials

This in vivo study analyzed the sealing ability of two adhesives in post spaces, cyanoacrylate (Super Bonder® - Henkel Loctite Adesivos Ltda., Itapevi, SP, Brazil) and ScotchbondTM Multi-Purpose (3M Dental Products, St. Paul, MN, USA), testing the hypothesis that their use would result in a decreased leakage through the remaining filling material. Forty extracted premolars (80 root canals) of dogs were used. The root canals were cleaned, shaped and filled by the lateral condensation technique using Sealer 26TM. The post space was created removing two thirds of the filling material within the root canal. The canals were randomly divided in three groups, which were treated as follows: Group A received the ScotchbondTM Multi-Purpose adhesive system; for Group B the cyanoacrylate adhesive, Super BonderTM, was employed; and no adhesive was applied into the post space for Group C (control group). A glass ionomer provisional restoration was placed allowing the sealer to set for 72 hours. Then the restoration was removed and the root canal was exposed to the oral environment for 45 days. The dogs were then killed and their jaws were removed. The post spaces were filled with India ink and the teeth were restored for 96 hours. Afterwards, the teeth were extracted and the roots were sectioned at the furcation for allocation to their specific groups. The teeth were turned transparent and the quantitative analysis of leakage was performed using light microscopy. The results showed no significant differences between groups, rejecting the initial hypothesis. Leakage occurred in a great extent in all specimens. Therefore, sealing post spaces with the adhesives used in this study was not an effective method to prevent microleakage.

Prevalência de Lesões Periapicais Observadas em Radiografias Panorâmicas

The present study had as objective to perform an epidemiological survey on radiolucent periapical lesions prevalence in a sample of 107 panoramic radiographs of patients in the graduation course in Dentistry school IMED. Patients included have panoramic radiographs performed in the year 2015 and with the term of Free and Informed Consent signed. The data collection regarded panoramic reports exams and radiographs. The criteria was: periapical lesion presence visible in radiographic, patient’s gender, age, total number of teeth, dental element, arch and number of endodontic treatments. The data were organized and compared. The results showed that 53.3% of the radiographic reports had a periapical lesion. Most of the lesions were in the maxilla, with 58.5% of the occurrences and the most affected dental elements were 22 and 26. In conclusion, periapical lesions were more frequent in women in the upper arch on lateral incisors and upper first molars.

Patência apical nos canais radiculares dos primeiros molares superiores

Objetivos: O objetivo deste estudo foi avaliar, ex vivo, a porcentagem da obtencaode patencia apical nos canais radiculares dos primeiros molares superiores permanentese a influencia da ampliacao cervical nesta verificacao.Metodo: Foram analisados 73 primeiros molares superiores permanentes, selecionadosatraves de exame visual e radiografico. Para a execucao do estudo, os dentesforam previamente abordados e os canais radiculares localizados. A patenciaapical foi verificada utilizando-se instrumentos de aco inoxidavel #08 ou #10, deacordo com o diâmetro de cada canal radicular. Quando nao se conseguia a patenciaapical, o terco cervical foi ampliado, com brocas de Gates-Glidden #1 e #2,seguidas de brocas LA Axxess #20 e a tentativa de obtencao de patencia, executadanovamente.Resultados: Os resultados obtidos, com relacao a presenca de patencia apical, foramde 79,45% para os canais radiculares mesiovestibulares, 29,62% para os canaisradiculares mesiopalatinos, 72,60% para os canais radiculares distovestibulares e84,93% para os canais radiculares palatinos.Conclusao: Pode-se concluir que a ampliacao do terco cervical aumentou em 8,42%a obtencao de patencia apical em todos os canais radiculares.