José Yravedra

A study of dimensional differences of tooth marks (pits and scores) on bones modified by small and large carnivores

The use of tooth mark sizes to infer carnivore types when analyzing the modification of faunal assemblages has been criticized on the base of intense overlap in tooth mark size among differently sized carnivores. The present study analyzes this overlap and presents some critical explanations for it. This work is based on the largest collection of tooth pit dimensional data collected to date for some of the most relevant carnivore types. The study empirically shows that small and large carnivores can be clearly differentiated when using tooth pit size, with a higher discrimination when using tooth marks on dense shafts than on cancellous ends. It is argued that most previous studies of tooth mark sizes have reproduced a higher overlap probably because sample sizes were small, and experiments were carried out using small carcasses (which require a smaller bite force) or for a combination of factors.

Unraveling hominin behavior at another anthropogenic site from Olduvai Gorge (Tanzania): new archaeological and taphonomic research at BK, Upper Bed II.

New archaeological excavations and research at BK, Upper Bed II (Olduvai Gorge, Tanzania) have yielded a rich and unbiased collection of fossil bones. These new excavations show that BK is a stratified deposit formed in a riverine setting close to an alluvial plain. The present taphonomic study reveals the second-largest collection of hominin-modified bones from Olduvai, with abundant cut marks found on most of the anatomical areas preserved. Meat and marrow exploitation is reconstructed using the taphonomic signatures left on the bones by hominins. Highly cut-marked long limb shafts, especially those of upper limb bones, suggest that hominins at BK were actively engaged in acquiring small and middle-sized animals using strategies other than passive scavenging. The exploitation of large-sized game (Pelorovis) by Lower Pleistocene hominins, as suggested by previous researchers, is supported by the present study.

First Partial Skeleton of a 1.34-Million-Year-Old Paranthropus boisei from Bed II, Olduvai Gorge, Tanzania

Recent excavations in Level 4 at BK (Bed II, Olduvai Gorge, Tanzania) have yielded nine hominin teeth, a distal humerus fragment, a proximal radius with much of its shaft, a femur shaft, and a tibia shaft fragment (cataloged collectively as OH 80). Those elements identified more specifically than to simply Hominidae gen. et sp. indet are attributed to Paranthropus boisei. Before this study, incontrovertible P. boisei partial skeletons, for which postcranial remains occurred in association with taxonomically diagnostic craniodental remains, were unknown. Thus, OH 80 stands as the first unambiguous, dentally associated Paranthropus partial skeleton from East Africa. The morphology and size of its constituent parts suggest that the fossils derived from an extremely robust individual who, at 1.338±0.024 Ma (1 sigma), represents one of the most recent occurrences of Paranthropus before its extinction in East Africa.

The Origin of The Acheulean: The 1.7 Million-Year-Old Site of FLK West, Olduvai Gorge (Tanzania).

The appearance of the Acheulean is one of the hallmarks of human evolution. It represents the emergence of a complex behavior, expressed in the recurrent manufacture of large-sized tools, with standardized forms, implying more advance forethought and planning by hominins than those required by the precedent Oldowan technology. The earliest known evidence of this technology dates back to c. 1.7 Ma. and is limited to two sites (Kokiselei [Kenya] and Konso [Ethiopia]), both of which lack functionally-associated fauna. The functionality of these earliest Acheulean assemblages remains unknown. Here we present the discovery of another early Acheulean site also dating to c. 1.7 Ma from Olduvai Gorge. This site provides evidence of the earliest steps in developing the Acheulean technology and is the oldest Acheulean site in which stone tools occur spatially and functionally associated with the exploitation of fauna. Simple and elaborate large-cutting tools (LCT) and bifacial handaxes co-exist at FLK West, showing that complex cognition was present from the earliest stages of the Acheulean. Here we provide a detailed technological study and evidence of the use of these tools on the butchery and consumption of fauna, probably by early Homo erectus sensu lato.

A critical re-evaluation of bone surface modification models for inferring fossil hominin and carnivore interactions through a multivariate approach: Application to the FLK Zinj archaeofaunal assemblage (Olduvai Gorge, Tanzania)

Over the past three decades, controversial interpretations of the behavioral meaning of bone Surface modifications at FLK Zinj regarding primary or secondary access to carcasses by hominins have stemmed from the independent use of mark types (cut, percussion, and tooth marks) to evaluate opposing models. Such controversy has also been based on an over-reliance on tooth mark frequencies (mostly generated by non-hominin carnivores), which have been documented to be high when hyenids are primary bone modifiers, low when felids have primary access to carcasses, and high when suids feed primarily or secondarily on carcass parts. In addition, it has also been argued that the frequency of tooth marks on the FLK Zinj bones has been overidentified by some researchers, by mistaking tooth marks with biochemical marks created by plant roots. Some methodological approaches have hampered the use of cut marks to identify hominin behavior. Most of the reasons for purported equifinality of experimental scenarios are strictly methodological and are also caused by the separate rather than joint analysis of mark types. In the present work, for the first time cut marks, tooth marks, and percussion marks will be jointly analyzed, both experimentally and at FLK Zinj. Primary and secondary access to carcasses by hominins yields different frequency associations of all of these marks, which can be diagnostic of the type of access. Such mark-type relationships can only be detected when all mark types are analyzed simultaneously and not as separate sets. This multivariate approach provides a robust interpretation of primary access to carcasses by hominins at FLK Zinj.

Neanderthal exploitation of ibex and chamois in southwestern Europe.

There is increasing evidence that Neanderthals had a diverse and flexible diet. They exploited a wide range of resources from large proboscideans to small animals like turtles, rabbits, and marine species. Here, we discuss the importance of ibex and chamois in Neanderthal hunting strategies. The exploitation of both animals has traditionally been regarded as typical of Homo sapiens hunting behavior but was not a feature of Neanderthal behavior, which was thought to have focused on other kinds of game like deer, horses or large bovids. Our analysis of an extensive sample of Middle Paleolithic sites with faunal remains in the Iberian Peninsula reveals that Iberian ibex and chamois were frequently present throughout this period. Statistical analyses allowed us to assess the conditions that might have favored the presence or absence of these animals in the sites, while the taphonomic analyses enabled us to address the issue of whether ibex and chamois were indeed hunted by Neanderthals in the Iberian Peninsula. Our results indicate a better representation of both species in rocky and mountainous areas. The taphonomy of some sites reveals that chamois and ibex were hunted by Neanderthals, who showed great adaptive capacities to a wide variety of environments, including mountainous habitats. In contrast, other sites with favorable ecological conditions for ibex and chamois where these animals were not exploited by Neanderthals, who chose to hunt other species like deer, horses or aurochs, suggest behavioral complexity and large versatility.

Micro-photogrammetric and morphometric differentiation of cut marks on bones using metal knives, quartzite, and flint flakes

In a previous article, we presented an innovative method to analyze cut marks produced with metal tools on animal bones from a metrical and tridimensional perspective (Maté-González et al. 2015). Such analysis developed a low-cost alternative technique to traditional microscopic methods for the tridimensional reconstruction of marks, using their measurements and sections. This article presents the results of an experimental study to test this photogrammetric and morphometric method for differentiating cut marks generated with metal, flint, and quartzite flakes. The results indicate statistically significant differences among cut marks produced by these three types of raw material. These results encourage the application of this method to archeological assemblages in order to establish a link between carcass processing and lithic reduction sequences on different raw materials and also to define the kind of tools used during butchery.

Lions as Bone Accumulators? Paleontological and Ecological Implications of a Modern Bone Assemblage from Olduvai Gorge.

Analytic models have been developed to reconstruct early hominin behaviour, especially their subsistence patterns, revealed mainly through taphonomic analyses of archaeofaunal assemblages. Taphonomic research is used to discern which agents (carnivores, humans or both) generate the bone assemblages recovered at archaeological sites. Taphonomic frameworks developed during the last decades show that the only large-sized carnivores in African biomes able to create bone assemblages are leopards and hyenas. A carnivore-made bone assemblage located in the short-grassland ecological unit of the Serengeti (within Olduvai Gorge) was studied. Taphonomic analyses of this assemblage including skeletal part representation, bone density, breakage patterns and anatomical distribution of tooth marks, along with an ecological approach to the prey selection made by large carnivores of the Serengeti, were carried out. The results show that this bone assemblage may be the first lion-accumulated assemblage documented, although other carnivores (namely spotted hyenas) may have also intervened through postdepositional ravaging. This first faunal assemblage potentially created by lions constitutes a new framework for neotaphonomic studies. Since lions may accumulate carcasses under exceptional circumstances, such as those documented at the site reported here, this finding may have important consequences for interpretations of early archaeological and paleontological sites, which provide key information about human evolution.

A taphonomic study of the African wild dog (Lycaon pictus)

Carnivore taphonomy has been traditionally used for the interpretation of archaeological sites in order to discriminate human-generated or modified from non-anthropic bone assemblages. In most of this actualistic research, the focus has mainly been placed on hyenas and felids, neglecting other carnivores. This paper analyzes the taphonomic impact of the African wild dog (Lycaon pictus) on equid bones and compares it with the bone modification patterns produced by other canids, such as wolves (Canis lupus) in order to compare medium-/large-sized canid variability on bone modification patterns and elaborate a referential framework which could be feasibly applied to the zooarchaeological record to detect canid intervention on archaeological assemblages in the past.

Assessment of statistical agreement of three techniques for the study of cut marks: 3D digital microscope, laser scanning confocal microscopy and micro-photogrammetry

In the last few years, the study of cut marks on bone surfaces has become fundamental for the interpretation of prehistoric butchery practices. Due to the difficulties in the correct identification of cut marks, many criteria for their description and classification have been suggested. Different techniques, such as three‐dimensional digital microscope (3D DM), laser scanning confocal microscopy (LSCM) and micro‐photogrammetry (M‐PG) have been recently applied to the study of cut marks. Although the 3D DM and LSCM microscopic techniques are the most commonly used for the 3D identification of cut marks, M‐PG has also proved to be very efficient and a low‐cost method. M‐PG is a noninvasive technique that allows the study of the cortical surface without any previous preparation of the samples, and that generates high‐resolution models. Despite the current application of microscopic and micro‐photogrammetric techniques to taphonomy, their reliability has never been tested. In this paper, we compare 3D DM, LSCM and M‐PG in order to assess their resolution and results. In this study, we analyse 26 experimental cut marks generated with a metal knife. The quantitative and qualitative information registered is analysed by means of standard multivariate statistics and geometric morphometrics to assess the similarities and differences obtained with the different methodologies.