Joselito P. Labis

Luminescent mesoporous LaVO4:Eu3+ core-shell nanoparticles: synthesis, characterization, biocompatibility and their cytotoxicity

A general and facile method was used for preparation of water-soluble silica coated LaVO4:Eu3+ core-shell nanoparticles. In the present study, we have discussed and compared the cytotoxicity characteristics of the synthesized LaVO4:Eu3+ and silica coated LaVO4:Eu3+ core-shell nanoparticles. X-ray diffraction (XRD), field-emission transmission electron microscopy (FE-TEM), energy dispersive X-ray analysis (EDX), Fourier-transform infrared spectroscopy (FTIR), UV/Vis absorption spectroscopy and photoluminescence spectroscopic techniques were employed to characterize the structure and morphology of the prepared products. To obtain high aqueous solubility, luminescent LaVO4:Eu3+ nanoparticles were encapsulated with silica groups, giving the nanoparticles a negatively charged surface at physiological pH. The results of XRD confirm the formation of a well-crystallized LaVO4:Eu3+ phase with a tetragonal zircon structure. Optical absorption spectra show that the optical properties of silica-coated LaVO4:Eu3+ core-shell nanoparticles are related to their sizes and shapes. Further, in order to assess cytotoxicity, we investigated whether the LaVO4:Eu3+ nanoparticles could alter biological samples once they enter human H522 and peripheral blood mono nuclear cells (PBMCs). An MTT assay was performed to measure the mitochondrial activity that reflects the number of viable cells. Silica coated LaVO4:Eu3+ core-shell nanoparticles exhibited no significant effect on the viability of both types of cells up to 24 h after exposure. Strikingly, no dose effects were detected, even at highest concentrations.

In-vitro cyto-toxicity, geno-toxicity, and bio-imaging evaluation of one-pot synthesized luminescent functionalized mesoporous SiO2@Eu(OH)(3) core-shell microspheres

UNLABELLED Luminescent functionalized mesoporous SiO2@Eu(OH)3 core-shell microspheres (LFMCSMs) were prepared by coating of europium hydroxide (Eu(OH)3) shell on mesoporous silica (SiO2) nanospheres via a facile one-pot process at low temperature. The FETEM images revealed that a well-defined luminescent europium hydroxide shell was successfully grafted on the surface of mesoporous silica nanospheres. These experimental results showed that the LFMCSM has a typical diameter of ca. 392 nm consisting of the silica core with about 230 nm in diameter and europium hydroxide shell with an average thickness of about 162 nm. LFMCSMs exhibited strong red emission peak upon irradiation with ultraviolet light, which originated from the electric-dipole transition (5)D0 → (7)F2 (614 nm) of Eu(3+) ion. The biocompatibility of the synthesized LFMCSMs was evaluated in vitro by assessing their cytotoxic and genotoxic effect on human hepatoblastoma (HepG2) cells using MTT, TUNEL, fluorescent staining, DNA ladder and Gene expression assays respectively. FROM THE CLINICAL EDITOR This paper describes the development of a one-pot synthesis of luminescent mesoporous SiO2@Eu(OH)3 core-shell microspheres and evaluates their favorable in vitro cyto-toxicity and geno-toxicity, and their applications in bio-imaging of these particles that emit bright red signal under UV exposure.

One-pot synthesis and photoluminescence properties of luminescent functionalized mesoporous SiO2@Tb(OH)3 core–shell nanospheres

A facile one-pot synthesis method was used for the preparation of water-soluble luminescent mesoporous SiO2@Tb(OH)3 core–shell nanospheres. The prepared core–shell nanospheres have amorphous characteristics, with diameters in the distribution range of 105–135 nm. The results of X-ray diffraction (XRD) confirmed the non-crystalline nature of the core–shell nanospheres. Furthermore, the transmission electron microscopy (TEM) results have also revealed a typically ordered mesoporous characteristic of the nanospheres, which have a monodisperse spherical feature in addition to a porous surface and a narrow size distribution. Our optical studies have shown the characteristic emission of Tb3+ (5D4–7Fj, where j = 6, 5, 4, 3, 2, 0), even after making a core–shell structure on the surface of the mesoporous silica nanoparticles, indicating that Tb3+ interacts with the silica framework (possibly the hydroxyl groups on the silica surface), and thus prevents aggregation among the Tb3+ ions, therefore efficiently enhancing the luminescence character of the nanospheres. These water-soluble luminescent mesoporous SiO2@Tb(OH)3 core–shell nanospheres could be highly suitable materials for optical bioprobes, protein labeling and drug-delivery, as particle sizes in the range of 50 to 300 nm are widely sought for drug delivery systems.

Synthesis and application of Fe3O4@SiO2@TiO2 for photocatalytic decomposition of organic matrix simultaneously with magnetic solid phase extraction of heavy metals prior to ICP-MS analysis

Interference of organic compounds in the matrix of heavy metal solution could suppress their pre-concentration and detection processes. Therefore, this work aimed to develop simple and facile methods for separation of heavy metals before ICP-MS analysis. Fe3O4@SiO2@TiO2 core-double shell magnetic adsorbent was prepared and characterized by TEM, SEM, FTIR, XRD and surface area, and tested for Magnetic Solid Phase Extraction (MSPE) of Cu(II), Zn(II), Cd(II) and Pb(II). TEM micrograph of Fe3O4@SiO2@TiO2 reveals the uniform coating of TiO2 layer of about 20nm onto the Fe3O4@SiO2 nanoparticles and indicates that all nanoparticles are monodispersed and uniform. The saturation magnetization from the room-temperature hysteresis loops of Fe3O4 and Fe3O4@SiO2@TiO2 was found to be 72 and 40emug(-1), respectively, suggesting good separability of the nanoparticles. The Fe3O4@SiO2@TiO2 showed maximum adsorption capacity of 125, 137, 148 and 160mgg(-1) for Cu(II), Zn(II), Cd(II) and Pb(II) respectively, and the process was found to fit with the second order kinetic model and Langmuir isotherm. Fe3O4@SiO2@TiO2 showed efficient photocatalytic decomposition for tartrazine and sunset yellow (consider as Interfering organic compounds) in aqueous solution under the irradiation of UV light. The maximum recovery% was achieved at pH 5, by elution with 10mL of 2M nitric acid solution. The LODs were found to be 0.066, 0.049, 0.041 and 0.082µgL(-1) for Cu(II), Zn(II), Cd(II) and Pb(II), respectively while the LOQs were found to be 0.20, 0.15, 0.12 and 0.25µgL(-1) for Cu(II), Zn(II), Cd(II) and Pb(II), respectively.

Pulicaria glutinosa extract: a toolbox to synthesize highly reduced graphene oxide-silver nanocomposites.

A green, one-step approach for the preparation of graphene/Ag nanocomposites (PE-HRG-Ag) via simultaneous reduction of both graphene oxide (GRO) and silver ions using Pulicaria glutinosa plant extract (PE) as reducing agent is reported. The plant extract functionalizes the surfaces of highly reduced graphene oxide (HRG) which helps in conjugating the Ag NPs to HRG. Increasing amounts of Ag precursor enhanced the density of Ag nanoparticles (NPs) on HRG. The preparation of PE-HRG-Ag nanocomposite is monitored by using ultraviolet–visible (UV-Vis) spectroscopy, powder X-ray diffraction (XRD), and energy dispersive X-ray (EDX). The as-prepared PE-HRG-Ag nanocomposities display excellent surface-enhanced Raman scattering (SERS) activity, and significantly increased the intensities of the Raman signal of graphene.

Enhanced Oxygen Reduction Activity of IrCu Core Platinum Monolayer Shell Nano-electrocatalysts

Designing novel cathode materials for a proton exchange membrane fuel cell with high activity for the oxygen reduction reaction, low Pt loading, and enhanced long-term stability is imperative for its sustainability. To date, Pt monolayer based electrocatalysts deposited on a metallic core substrate have shown promising possibilities. In this study, we synthesized bimetallic IrCu nanoparticles and used them as a core for Pt monolayer electrocatalysts. It was found that the de-alloyed IrCu nanoparticle surfaces increased both the mass and specific activities of the resulting Pt monolayer catalyst. In addition, we demonstrated that Pt monolayer electrocatalysts with a de-alloyed IrCu core have a better stability than those using a non-dealloyed core based on a 5,000 potential cycling test. These data describe a new simple synthesis of a high-performance catalyst suitable for practical applications.

Synthesis of double mesoporous core–shell silica spheres with tunable core porosity and their drug release and cancer cell apoptosis properties

In this work, we demonstrate a simple two-pot approach to double mesoporous core-shell silica spheres (DMCSSs) with uniform size of 245-790 nm, shell thickness of 41-80 nm and surface area and total pore volume of 141-618 m(2) g(-1) and 0.14-0.585 cc g(-1), respectively. First, solid silica spherical particles were synthesized by the Stöber method and used as a core. Second, a mesoporous shell could be formed around the silica cores by using an anionic surfactant and a co-structure directing agent. It was found that mesopores can be anchored within dense silica cores during mesoporous silica shell formation, synchronously the base group with surfactant assistant can etch the dense silica cores to re-organize new mesostructure, so that double mesoporous core-shell silica sphere (DMCSS) structure can be obtained by a single surfactant-templating step. The spherical size and porosity of the silica cores of DMCSS together with shell thickness can be tuned by controlling Stöber parameters, including the concentrations of ammonia, solvent and tetraethoxysilane and the reaction time. DMCSS were loaded with ketoprofen and thymoquinone, which are an anti-inflammatory and a potential novel anti-cancer drug, respectively. Both drugs showed controlled release behavior from the pores of DMCSS. Drug uptakes within DMCSS were ~27 and 81 wt.% for ketoprofen and thymoquinone, respectively. Furthermore, DMCSS loaded with thymoquinone was more effective in inducing cancer cell apoptosis than uncontained thymoquinone, because of the slow release of the drug from the mesoporous structure.

Optimization of Synthesis Parameters for Mesoporous Shell Formation on Magnetic Nanocores and Their Application as Nanocarriers for Docetaxel Cancer Drug

In this work, Fe3O4@SiO2 nanoparticles were coated with mesoporous silica shell by S−N+I− pathway by using anionic surfactant (S−) and co-structure directing agent (N+). The role of co-structure directing agent (CSDA) is to assist the electrostatic interaction between negatively charged silica layers and the negatively charged surfactant molecules. Prior to the mesoporous shell formation step, magnetic cores were coated with a dense silica layer to prevent iron oxide cores from leaching into the mother system under any acidic circumstances. However, it was found that both dense and mesoporous coating parameters affect the textural properties of the produced mesoporous silica shell (i.e., surface area, pore volume and shell thickness). The synthesized Fe3O4@SiO2@m-SiO2 (MCMSS) nanoparticles have been characterized by low-angle X-ray diffraction, transmission electron microscopy (TEM), and N2 adsorption-desorption analysis, and magnetic properties. The synthesized particles had dense and mesoporous silica shells of 8–37 nm and 26–50 nm, respectively. Furthermore, MCMSS possessed surface area of ca. 259–621 m2·g−1, and pore volume of ca. 0.216–0.443 cc·g−1. MCMSS showed docetaxcel cancer drug storage capacity of 25–33 w/w% and possessed control release from their mesochannels which suggest them as proper nanocarriers for docetaxcel molecules.

Facile synthesis of water-soluble luminescent mesoporous Tb(OH)3@SiO2 core-shell nanospheres

Luminescent mesoporous Tb(OH)3@SiO2 core-shell nanospheres were synthesized through W/O microemulsion process at ambient temperature. The negatively charged silica favors a coating of the positively charged Tb3+ composite. Thus, silicon layer was adsorbed on the surface of Tb(OH)3 groups to form Tb-O-Si through electrostatic interaction. X-ray diffraction, field emission transmission electron microscopy (FE-TEM), energy-dispersive X-ray spectrometry, and Fourier transform infrared, UV/Visible, and photoluminescence spectroscopies were applied to examine the phase purity, crystallinity, surface morphology, and optical properties of the core-shell nanospheres. The FE-TEM results have revealed typically ordered mesoporous characteristics of the material with monodisperse spherical morphology in a narrow size distribution. The luminescent mesoporous core-shell nanospheres exposed remarkable splitting with broadening in the emission transition 5D4 → 7F5 (543 nm). In addition, the luminescent mesoporous core-shell nanospheres emit strong green fluorescence (from Tb3+) in the middle of the visible region under 325 nm (3.8) excitation. The luminescent mesoporous Tb(OH)3@SiO2 core-shell nanospheres can therefore be exploited as fluorescent probes in biomarkers or biolabeling, optical sensing, and drug delivery system. Further, these nanospheres could have potential use as scattering layers in dye-sensitized solar cells.

Determination of the microstructure of Eu-treated ZnO nanowires by x-ray absorption

X-ray absorption near-edge structure (XANES), extended x-ray absorption fine structures (EXAFS), and photoluminescence measurements were used to elucidate the microstructural and photoluminescence properties of ZnO nanowires (ZnO-NWs) that had been treated with Eu by thermal diffusion. The O K- and Eu L3-edge XANES and EXAFS spectra at the Zn K- and Eu L3-edge verified the formation of Eu2O3-like layer on the surface of ZnO-NWs. X-ray diffraction, XANES and EXAFS measurements consistently suggest the lack of substitutional doping of Eu ions at the Zn ion sites in the interior of ZnO-NWs. The clear sharp and intense emission bands in the range 610–630 nm of Eu-treated ZnO-NWs originated from the intra-4f transition of Eu ions in the Eu2O3-like surface layer.