Joseph Paul Baboo

One‐Step Pyro‐Synthesis of a Nanostructured Mn3O4/C Electrode with Long Cycle Stability for Rechargeable Lithium‐Ion Batteries

A nanostructured Mn3 O4 /C electrode was prepared by a one-step polyol-assisted pyro-synthesis without any post-heat treatments. The as-prepared Mn3 O4 /C revealed nanostructured morphology comprised of secondary aggregates formed from carbon-coated primary particles of average diameters ranging between 20 and 40 nm, as evidenced from the electron microscopy studies. The N2 adsorption studies reveal a hierarchical porous feature in the nanostructured electrode. The nanostructured morphology appears to be related to the present rapid combustion strategy. The nanostructured porous Mn3 O4 /C electrode demonstrated impressive electrode properties with reversible capacities of 666 mAh g-1 at a current density of 33 mA g-1 , good capacity retentions (1141 mAh g-1 with 100 % Coulombic efficiencies at the 100th cycle), and rate capabilities (307 and 202 mAh g-1 at 528 and 1056 mA g-1 , respectively) when tested as an anode for lithium-ion battery applications.

Low-temperature synthesis of LiFePO4 nanocrystals by solvothermal route

LiFePO4 nanocrystals were synthesized at a very low temperature of 170°C using carbon nanoparticles by a solvothermal process in a polyol medium, namely diethylene glycol without any heat treatment as a post procedure. The powder X-ray diffraction pattern of the LiFePO4 was indexed well to a pure orthorhombic system of olivine structure (space group: Pnma) with no undesirable impurities. The LiFePO4 nanocrystals synthesized at low temperature exhibited mono-dispersed and carbon-mixed plate-type LiFePO4 nanoparticles with average length, width, and thickness of approximately 100 to 300 nm, 100 to 200 nm, and 50 nm, respectively. It also appeared to reveal considerably enhanced electrochemical properties when compared to those of pristine LiFePO4. These observed results clearly indicate the effect of carbon in improving the reactivity and synthesis of LiFePO4 nanoparticles at a significantly lower temperature.

Facile synthesis and the exploration of the zinc storage mechanism of β-MnO2 nanorods with exposed (101) planes as a novel cathode material for high performance eco-friendly zinc-ion batteries

Aqueous Zn-ion batteries (ZIBs) have emerged as promising and eco-friendly next-generation energy storage systems to substitute lithium-ion batteries. Therefore, discovering new electrode materials for ZIBs with high performance and unraveling their electrochemical reactions during Zn-ion insertion/extraction are of great interest. Here, we present, for the first time, tunnel-type β-MnO2 nanorods with exposed (101) planes, prepared via a facile microwave-assisted hydrothermal synthesis within only 10 min, for use as a high performance cathode for ZIBs. In contrast to its bulk counterpart, which showed no electrochemical reactivity, the present β-MnO2 nanorod electrode exhibited a high discharge capacity of 270 mA h g−1 at 100 mA g−1, high rate capability (123 and 86 mA h g−1 at 528 and 1056 mA g−1, respectively), and long cycling stability (75% capacity retention with 100% coulombic efficiency at 200 mA g−1) over 200 cycles. The Zn-ion storage mechanism of the cathode was also unraveled using in situ synchrotron, ex situ X-ray diffraction, ex situ X-ray photoelectron spectroscopy, and ex situ X-ray absorption spectroscopy. Our present study indicates that Zn intercalation occurred via a combination of solid solution and conversion reactions. During initial cycles, the β-MnO2 cathode was able to maintain its structure; however, after prolonged cycles, it transformed into a spinel structure. The present results challenge the common views on the β-MnO2 electrode and pave the way for the further development of ZIBs as cost-effective and environmentally friendly next-generation energy storage systems.

Porous TiN nanoparticles embedded in a N-doped carbon composite derived from metal–organic frameworks as a superior anode in lithium-ion batteries

A porous TiN/N-doped carbon composite electrode prepared via a metal–organic framework strategy exhibited high reversible lithium specific capacity (561 mA h g−1 at 50 mA g−1), excellent rate capability (281 mA h g−1 at 2 A g−1), and good cycle stability (310 mA h g−1 at 2 A g−1 for 400 cycles).

An Enhanced High-Rate Na3V2(PO4)3-Ni2P Nanocomposite Cathode with Stable Lifetime for Sodium-Ion Batteries

Herein, we report on a high-discharge-rate Na3V2(PO4)3-Ni2P/C (NVP-NP/C) composite cathode prepared using a polyol-based pyro synthesis for Na-ion battery applications. X-ray diffraction and electron microscopy studies established the presence of Na3V2(PO4)3 and Ni2P, respectively, in the NVP-NP/C composite. As a cathode material, the obtained NVP-NP/C composite electrode exhibits higher discharge capacities (100.8 mAhg-1 at 10.8 C and 73.9 mAhg-1 at 34 C) than the NVP/C counterpart electrode (62.7 mAhg-1 at 10.8 C and 4.7 mAhg-1 at 34 C), and the composite electrode retained 95.3% of the initial capacity even after 1500 cycles at 16 C. The enhanced performance could be attributed to the synergetic effect of the Ni2P phase and nanoscale NVP particles, which ultimately results in noticeably enhancing the electrical conductivity of the composite. The present study thus demonstrates that the Na3V2(PO4)3-Ni2P/C nanocomposite is a prospective candidate for NIB with a high power/energy density.