Joseph W. Fowler

Detection of the power spectrum of cosmic microwave background lensing by the Atacama Cosmology Telescope.

We report the first detection of the gravitational lensing of the cosmic microwave background through a measurement of the four-point correlation function in the temperature maps made by the Atacama Cosmology Telescope. We verify our detection by calculating the levels of potential contaminants and performing a number of null tests. The resulting convergence power spectrum at 2° angular scales measures the amplitude of matter density fluctuations on comoving length scales of around 100 Mpc at redshifts around 0.5 to 3. The measured amplitude of the signal agrees with Lambda cold dark matter cosmology predictions. Since the amplitude of the convergence power spectrum scales as the square of the amplitude of the density fluctuations, the 4σ detection of the lensing signal measures the amplitude of density fluctuations to 12%.

The Atacama Cosmology Telescope: a measurement of the cosmic microwave background power spectrum at 148 and 218 GHz from the 2008 southern survey

We present measurements of the cosmic microwave background (CMB) power spectrum made by the Atacama Cosmology Telescope at 148 GHz and 218 GHz, as well as the cross-frequency spectrum between the two channels. Our results clearly show the second through the seventh acoustic peaks in the CMB power spectrum. The measurements of these higher-order peaks provide an additional test of the ΛCDM cosmological model. At l>3000, we detect power in excess of the primary anisotropy spectrum of the CMB. At lower multipoles 500 < l < 3000, we find evidence for gravitational lensing of the CMB in the power spectrum at the 2.8σ level. We also detect a low level of Galactic dust in our maps, which demonstrates that we can recover known faint, diffuse signals.

Optical design of the Atacama Cosmology Telescope and the Millimeter Bolometric Array Camera

The Atacama Cosmology Telescope is a 6 m telescope designed to map the cosmic microwave background simultaneously at 145, 215, and 280 GHz with arcminute resolution. Each frequency will have a 32 by 32 element focal plane array of transition edge sensor bolometers. The telescope and the cold reimaging optics are optimized for millimeter-wave observations with these sensitive detectors. The design of each is described.

Evidence for dark energy from the cosmic microwave background alone using the Atacama Cosmology Telescope lensing measurements.

For the first time, measurements of the cosmic microwave background radiation (CMB) alone favor cosmologies with w = -1 dark energy over models without dark energy at a 3.2-sigma level. We demonstrate this by combining the CMB lensing deflection power spectrum from the Atacama Cosmology Telescope with temperature and polarization power spectra from the Wilkinson Microwave Anisotropy Probe. The lensing data break the geometric degeneracy of different cosmological models with similar CMB temperature power spectra. Our CMB-only measurement of the dark energy density Ω(Λ) confirms other measurements from supernovae, galaxy clusters, and baryon acoustic oscillations, and demonstrates the power of CMB lensing as a new cosmological tool.

The Atacama Cosmology Telescope: Extragalactic Sources at 148 GHz in the 2008 Survey

We report on extragalactic sources detected in a 455 deg2 map of the southern sky made with data at a frequency of 148 GHz from the Atacama Cosmology Telescope (ACT) 2008 observing season. We provide a catalog of 157 sources with flux densities spanning two orders of magnitude: from 15 mJy to 1500 mJy. Comparison to other catalogs shows that 98% of the ACT detections correspond to sources detected at lower radio frequencies. Three of the sources appear to be associated with the brightest cluster galaxies of low-redshift X-ray-selected galaxy clusters. Estimates of the radio to millimeter-wave spectral indices and differential counts of the sources further bolster the hypothesis that they are nearly all radio sources, and that their emission is not dominated by re-emission from warm dust. In a bright (>50 mJy) 148 GHz selected sample with complete cross-identifications from the Australia Telescope 20 GHz survey, we observe an average steepening of the spectra between 5, 20, and 148 GHz with median spectral indices of α5-20 = –0.07 ± 0.06, α20-148 = –0.39 ± 0.04, and α5-148 = –0.20 ± 0.03. When the measured spectral indices are taken into account, the 148 GHz differential source counts are consistent with previous measurements at 30 GHz in the context of a source count model dominated by radio sources. Extrapolating with an appropriately rescaled model for the radio source counts, the Poisson contribution to the spatial power spectrum from synchrotron-dominated sources with flux density less than 20 mJy is C Sync = (2.8 ± 0.3) × 10–6μK2.

Millimeter-wave antireflection coating for cryogenic silicon lenses.

We have developed and tested an antireflection (AR) coating method for silicon lenses used at cryogenic temperatures and millimeter wavelengths. Our particular application is a measurement of the cosmic microwave background. The coating consists of machined pieces of Cirlex glued to the silicon. The measured reflection from an AR-coated flat piece is less than 1.5% at the design wavelength. The coating has been applied to flats and lenses and has survived multiple thermal cycles from 300 to 4 K. We present the manufacturing method, the material properties, the tests performed, and estimates of the loss that can be achieved in practical lenses.

The Atacama Cosmology Telescope: Calibration with the Wilkinson Microwave Anisotropy Probe using cross-correlations

We present a new calibration method based on cross-correlations with the Wilkinson Microwave Anisotropy Probe (WMAP) and apply it to data from the Atacama Cosmology Telescope (ACT). ACTs observing strategy and map-making procedure allows an unbiased reconstruction of the modes in the maps over a wide range of multipoles. By directly matching the ACT maps to WMAP observations in the multipole range of 400 < l < 1000, we determine the absolute calibration with an uncertainty of 2% in temperature. The precise measurement of the calibration error directly impacts the uncertainties in the cosmological parameters estimated from the ACT power spectra. We also present a combined map based on ACT and WMAP data that has a high signal-to-noise ratio over a wide range of multipoles.We present a new calibration method based on cross-correlations with WMAP and apply it to data from the Atacama Cosmology Telescope (ACT). ACTs observing strategy and map making procedure allows an unbiased reconstruction of the modes in the maps over a wide range of multipoles. By directly matching the ACT maps to WMAP observations in the multipole range of 400 < ell < 1000, we determine the absolute calibration with an uncertainty of 2% in temperature. The precise measurement of the calibration error directly impacts the uncertainties in the cosmological parameters estimated from the ACT power spectra. We also present a combined map based on ACT and WMAP data that has high signal-to-noise over a wide range of multipoles.

Characterization of transition edge sensors for the Millimeter Bolometer Array Camera on the Atacama Cosmology Telescope.

The Atacama Cosmology Telescope (ACT) aims to measure the Cosmic Microwave Background (CMB) temperature anisotropies on arcminute scales. The primary receiver for ACT is the Millimeter Bolometer Array Camera (MBAC). The MBAC is comprised of three 32×32 transition edge sensor (TES) bolometer arrays, each observing the sky with an independent set of band-defining filters. The MBAC arrays will be the largest pop-up detector arrays fielded, and among the largest TES arrays built. Prior to its assembly into an array and installation into the MBAC, a column of 32 bolometers is tested at ~ 0.4 K in a quick-turn-around dip probe. In this paper we describe the properties of the ACT bolometers as revealed by data from those tests, emphasizing a characterization that accounts for both the complex impedance and the noise as a function of frequency.

Instrument design and characterization of the Millimeter Bolometer Array Camera on the Atacama Cosmology Telescope

The Millimeter Bolometer Array Camera (MBAC) was commissioned in the fall of 2007 on the new 6-meter Atacama Cosmology Telescope (ACT). The MBAC on the ACT will map the temperature anisotropies of the Cosmic Microwave Background (CMB) with arc-minute resolution. For this first observing season, the MBAC contained a diffraction-limited, 32 by 32 element, focal plane array of Transition Edge Sensor (TES) bolometers for observations at 145 GHz. This array was coupled to the telescope with a series of cold, refractive, reimaging optics. To meet the performance specifications, the MBAC employs four stages of cooling using closed-cycle 3He/4He sorption fridge systems in combination with pulse tube coolers. In this paper we present the design of the instrument and discuss its performance during the first observing season. Finally, we report on the status of the MBAC for the 2008 observing season, when the instrument will be upgraded to a total of three separate 1024-element arrays at 145 GHz, 220 GHz and 280 GHz.

Systems and control software for the Atacama Cosmology Telescope

The Atacama Cosmology Telescope (ACT) is designed to measure temperature anisotropies of the cosmic microwave background (CMB) at arcminute resolution. It is the first CMB experiment to employ a 32×32 close-packed array of free-space-coupled transition-edge superconducting bolometers. We describe the organization of the telescope systems and software for autonomous, scheduled operations. When paired with real-time data streaming and display, we are able to operate the telescope at the remote site in the Chilean Altiplano via the Internet from North America. The telescope had a data rate of 70 GB/day in the 2007 season, and the 2008 upgrade to three arrays will bring this to 210 GB/day.