Joshu J. Mountjoy

A model of active faulting in New Zealand

Active fault traces are a surface expression of permanent deformation that accommodates the motion within and between adjacent tectonic plates. We present an updated national-scale model for active faulting in New Zealand, summarize the current understanding of fault kinematics in 15 tectonic domains, and undertake some brief kinematic analysis including comparison of fault slip rates with GPS velocities. The model contains 635 simplified faults with tabulated parameters of their attitude (dip and dip-direction) and kinematics (sense of movement and rake of slip vector), net slip rate and a quality code. Fault density and slip rates are, as expected, highest along the central plate boundary zone, but the model is undoubtedly incomplete, particularly in rapidly eroding mountainous areas and submarine areas with limited data. The active fault data presented are of value to a range of kinematic, active fault and seismic hazard studies.

Evolution of fluid expulsion and concentrated hydrate zones across the southern Hikurangi subduction margin, New Zealand: An analysis from depth migrated seismic data

Identification of methane sources controlling hydrate distribution and concentrations in continental margins remains a major challenge in gas hydrate research. Lack of deep fluid samples and high quality regional scale seismic reflection data may lead to underestimation of the significance of fluid escape from subducting and compacting sediments in the global inventory of methane reaching the hydrate zone, the water column and the atmosphere. The distribution of concentrated hydrate zones in relation to focused fluid flow across the southern Hikurangi subduction margin was investigated using high quality, long offset (10 km streamer), pre-stack depth migrated multichannel seismic data. Analysis of low P wave velocity zones, bright-reverse polarity reflections and dim-amplitude anomalies reveals pathways for gas escape and zones of gas accumulation. The study shows the structural and stratigraphic settings of three main areas of concentrated hydrates: (1) the Opouawe Bank, dominated by focused periodic fluid input along thrust faults sustaining dynamic hydrate concentrations and gas chimneys development; (2) the frontal anticline, with a basal set of protothrusts controlling permeability for fluids from deeply buried and subducted sediments sustaining hydrate concentrations at the crest of the anticline; and (3) the Hikurangi Channel, with buried sand dominated channels hosting significant amounts of gas beneath the base of the hydrate zone. In sand dominated channels gas injection into the hydrate zone favors highly concentrated hydrate accumulations. The evolution of fluid expulsion controlling hydrate formation offshore southern Hikurangi is described in stages during which different methane sources (in situ, buried and thermogenic) have been dominant.

A topographic signature of a hydrodynamic origin for submarine gullies

Submarine gullies—small-scale, straight, shallow channels formed in relatively high seafloor-slope settings—are ubiquitous features that play an important role in the general evolution of continental margin morphology. The mechanisms associated with the origin and evolution of submarine gullies are, however, still poorly defined. In this paper, we present evidence of a topographic signature of gully erosion in the Cook Strait sector of the Hikurangi subduction margin, New Zealand. This signature indicates that submarine gully initiation is a threshold process driven by unconfined, directionally stable fluid or sediment gravity flows accelerating downslope. We propose cascading dense water, a type of current that is driven by seawater density contrast, as the source of these flows. The sensitivity of such ephemeral hydrodynamic events to climate change raises questions regarding implications for future variation of the distribution and magnitude of a significant seafloor erosion process.

Deep-seated bedrock landslides and submarine canyon evolution in an active tectonic margin : Cook Strait, New Zealand

The Cook Strait sector of the Hikurangi subduction margin, off south-east central New Zealand, is dominated by a multi-branched canyon system where landslides are widespread. The objective of this study is to determine the character, origin, and influence of these landslides on the evolution of the canyon system. Multibeam bathymetry covering seven submarine canyons is utilised to characterise landslides’ spatial distribution, morphological attributes and area-frequency characteristics. We demonstrate that mass movements within the Cook Strait canyons consist of spatially dense, predominantly retrogressive, small, deep-seated, translational bedrock landslides occurring in Late Cenozoic sequences. These landslides affect up to a quarter of the canyoned area. Concentration of landslides in the shallow canyon reaches (down to 800 m) is attributed to the influence of oceanographic processes originating on the continental shelf such as tide-generated currents, dense shelf water cascading and internal waves. Canyon incision and wall undercutting, locally favoured by underlying lithological control, are proposed as major landslide drivers in Cook Strait. Ground motion during regional earthquakes is considered a secondary cause. Retrogressive landslides are responsible for canyon widening and wall retreat, cross-sectional asymmetry, preconditioning for additional failure, destabilisation of adjacent slopes and delivery of sediment into canyon floors.

Shallow methane hydrate system controls ongoing, downslope sediment transport in a low‐velocity active submarine landslide complex, Hikurangi Margin, New Zealand

Morphological and seismic data from a submarine landslide complex east of New Zealand indicate flow-like deformation within gas hydrate-bearing sediment. This “creeping” deformation occurs immediately downslope of where the base of gas hydrate stability reaches the seafloor, suggesting involvement of gas hydrates. We present evidence that, contrary to conventional views, gas hydrates can directly destabilize the seafloor. Three mechanisms could explain how the shallow gas hydrate system could control these landslides. (1) Gas hydrate dissociation could result in excess pore pressure within the upper reaches of the landslide. (2) Overpressure below low-permeability gas hydrate-bearing sediments could cause hydrofracturing in the gas hydrate zone valving excess pore pressure into the landslide body. (3) Gas hydrate-bearing sediment could exhibit time-dependent plastic deformation enabling glacial-style deformation. We favor the final hypothesis that the landslides are actually creeping seafloor glaciers. The viability of rheologically controlled deformation of a hydrate sediment mix is supported by recent laboratory observations of time-dependent deformation behavior of gas hydrate-bearing sands. The controlling hydrate is likely to be strongly dependent on formation controls and intersediment hydrate morphology. Our results constitute a paradigm shift for evaluating the effect of gas hydrates on seafloor strength which, given the widespread occurrence of gas hydrates in the submarine environment, may require a reevaluation of slope stability following future climate-forced variation in bottom-water temperature.

Geomorphic response of submarine canyons to tectonic activity: Insights from the Cook Strait canyon system, New Zealand

Active margins host more than half of submarine canyons worldwide. Understanding the coupling between active tectonics and canyon processes is required to improve modeling of canyon evolution and derive tectonic information from canyon morphology. In this paper we analyze high-resolution geophysical data and imagery from the Cook Strait canyon system (CS), offshore New Zealand, to characterize the influence of active tectonics on the morphology, processes, and evolution of submarine canyons, and to deduce tectonic activity from canyon morphology. Canyon location and morphology bear the clearest evidence of tectonic activity, with major faults and structural ridges giving rise to sinuosity, steep and linear longitudinal profiles, cross-sectional asymmetry, and breaks in slope gradient, relief, and slope-area plots. Faults are also associated with stronger and more frequent sedimentary flows, steep canyon walls that promote gully erosion, and seismicity that is considered the most likely trigger of failure of canyon walls. Tectonic activity gives rise to two types of knickpoints in the CS. Gentle, rounded and diffusive knickpoints form due to short-wavelength folds or fault breakouts. The more widespread steep and angular knickpoints have migrated through canyon-floor slope failures and localized quarrying and/or plucking. Migration is driven by base-level lowering due to regional margin uplift and deepening of the lower Cook Strait Canyon, and is likely faster in larger canyons because of higher sedimentary flow throughput. The knickpoints, nonadherence to Playfair’s Law, linear longitudinal profiles, and lack of canyon-wide, inverse power law slope-area relationships indicate that the CS is in a transient state, adjusting to perturbations associated with tectonic displacements and changes in base level and sediment fluxes. We conclude by inferring unmapped faults and regions of more pronounced uplift, and proposing a generalized model for canyon geomorphic evolution in tectonically active margins.

Polyphase Emplacement of a 30 km3 Blocky Debris Avalanche and Its Role in Slope-Gully Development

Failure of the upper slope of the Hikurangi subduction margin resulted in emplacement of ∼30 km3 of debris across ∼250 km2 area of a mid-slope basin. The landslide deposit is well preserved in slope morphology. In this study we use morphometric analysis of Simrad EM300 multibeam data and stratigraphic analysis of multichannel seismic reflection data to assess a possible role for deep-seated bedrock failure in the erosional development of the upper continental slope. We interpret the blocky debris avalanche deposit as resulting from retrogressive polyphase failure. Late stage events are inferred to have impacted earlier debris and caused localised secondary remobilization failure. Morphometric analysis of upper-slope gully development indicates that gully systems become less mature to the north. Among several possible explanations for this pattern of gully development we infer a causal link between large-scale mass failure retrogression and the initiation of slope gully erosion systems.

Surface Rupture of Multiple Crustal Faults in the 2016 Mw 7.8 Kaikōura, New Zealand, Earthquake

Multiple (>20 >20 ) crustal faults ruptured to the ground surface and seafloor in the 14 November 2016 M w Mw 7.8 Kaikōura earthquake, and many have been documented in detail, providing an opportunity to understand the factors controlling multifault ruptures, including the role of the subduction interface. We present a summary of the surface ruptures, as well as previous knowledge including paleoseismic data, and use these data and a 3D geological model to calculate cumulative geological moment magnitudes (M G w MwG ) and seismic moments for comparison with those from geophysical datasets. The earthquake ruptured faults with a wide range of orientations, sense of movement, slip rates, and recurrence intervals, and crossed a tectonic domain boundary, the Hope fault. The maximum net surface displacement was ∼12  m ∼12  m on the Kekerengu and the Papatea faults, and average displacements for the major faults were 0.7–1.5 m south of the Hope fault, and 5.5–6.4 m to the north. M G w MwG using two different methods are M G w MwG 7.7 +0.3 −0.2 7.7−0.2+0.3 and the seismic moment is 33%–67% of geophysical datasets. However, these are minimum values and a best estimate M G w MwG incorporating probable larger slip at depth, a 20 km seismogenic depth, and likely listric geometry is M G w MwG 7.8±0.2 7.8±0.2 , suggests ≤32% ≤32% of the moment may be attributed to slip on the subduction interface and/or a midcrustal detachment. Likely factors contributing to multifault rupture in the Kaikōura earthquake include (1) the presence of the subduction interface, (2) physical linkages between faults, (3) rupture of geologically immature faults in the south, and (4) inherited geological structure. The estimated recurrence interval for the Kaikōura earthquake is ≥5,000–10,000  yrs ≥5,000–10,000  yrs , and so it is a relatively rare event. Nevertheless, these findings support the need for continued advances in seismic hazard modeling to ensure that they incorporate multifault ruptures that cross tectonic domain boundaries.

High-resolution seismic velocity analysis as a tool for exploring gas hydrate systems: An example from New Zealand’s southern Hikurangi margin

AbstractThe existence of free gas and gas hydrate in the pore spaces of marine sediments causes changes in acoustic velocities that overprint the background lithological velocities of the sediments themselves. Much previous work has determined that such velocity overprinting, if sufficiently pronounced, can be resolved with conventional velocity analysis from long-offset, multichannel seismic data. We used 2D seismic data from a gas hydrate province at the southern end of New Zealand’s Hikurangi subduction margin to describe a workflow for high-resolution velocity analysis that delivered detailed velocity models of shallow marine sediments and their coincident gas hydrate systems. The results showed examples of pronounced low-velocity zones caused by free gas ponding beneath the hydrate layer, as well as high-velocity zones related to gas hydrate deposits. For the seismic interpreter of a gas hydrate system, the velocity results represent an extra “layer” for interpretation that provides important informa...

Submarine canyons and gullies

Submarine canyons are deep incisions observed along most of the world’s continental margins. Their topographic relief is as dramatic as that of any canyon or river valley on land but is hidden beneath the surface of the ocean. Our knowledge of canyons has therefore come primarily from remote sensing and sampling, and has involved contributions from various oceanographic disciplines. Canyons are a critical link between coastal and shelf waters and abyssal depths; water masses, sediment, nutrients, and even litter and pollutants are carried through them. Advances in technology continue to provide new insights into canyon environments by pushing the frontier of deep marine observations and measurements. In this chapter we describe the main geomorphic features of submarine canyons and what is known about their formation and the processes that shape them. We also consider submarine gullies, which are small valleys commonly found within or alongside submarine canyons on the continental slope and may represent an incipient stage of canyon development.