Joshua Nowak

One-step synthesis of silver nanoparticle-filled nylon 6 nanofibers and their antibacterial properties

A novel and facile one-step approach to in situ synthesize silver nanoparticle-filled nylon 6 nanofibers by electrospinning is reported. The method does not need post-treatments and can be carried out at ambient conditions without using additional chemicals. It employs the electrospinning solvent as a reducing agent for in situ conversion of AgNO3 into silver nanoparticles during the solution preparation. The resultant silver nanoparticle-filled nylon 6 hybrid nanofibers show an excellent fibrous structure (fiber diameter at 50–150 nm), with narrow size 2–4 nm silver nanoparticles uniformly dispersed throughout the nylon 6 matrix. DSC analysis shows that the in situ incorporation of silver nanoparticles increased the Tg and crystallinity of the resultant nanofibers. These silver nanoparticle-filled nylon 6 nanofibers exhibit a steady and long-lasting silver ion release behavior, and robust antibacterial activity against both Gram-positive B. cereus and Gram-negative E. coli microorganisms.

Multifunctional ZnO/Nylon 6 nanofiber mats by an electrospinning-electrospraying hybrid process for use in protective applications.

Abstract ZnO/Nylon 6 nanofiber mats were prepared by an electrospinning–electrospraying hybrid process in which ZnO nanoparticles were dispersed on the surface of Nylon 6 nanofibers without becoming completely embedded. The prepared ZnO/Nylon 6 nanofiber mats were evaluated for their abilities to kill bacteria or inhibit their growth and to catalytically detoxify chemicals. Results showed that these ZnO/Nylon 6 nanofiber mats had excellent antibacterial efficiency (99.99%) against both the Gram-negative Escherichia coli and Gram-positive Bacillus cereus bacteria. In addition, they exhibited good detoxifying efficiency (95%) against paraoxon, a simulant of highly toxic chemicals. ZnO/Nylon 6 nanofiber mats were also deposited onto nylon/cotton woven fabrics and the nanofiber mats did not significantly affect the moisture vapor transmission rates and air permeability values of the fabrics. Therefore, ZnO/Nylon 6 nanofiber mats prepared by the electrospinning–electrospraying hybrid process are promising material candidates for protective applications.

Plasma-Electrospinning Hybrid Process and Plasma Pretreatment to Improve Adhesive Properties of Nanofibers on Fabric Surface

Electrospun nanofiber mats are inherently weak, and hence they are often deposited on mechanically-strong substrates such as porous woven fabrics that can provide good structural support without altering the nanofiber characteristics. One major challenge of this approach is to ensure good adhesion of nanofiber mats onto the substrates and to achieve satisfactory durability of nanofiber mats against flexion and abrasion during practical use. In this work, Nylon 6 nanofibers were deposited on plasma-pretreated woven fabric substrates through a new plasma-electrospinning hybrid process with the objective of improving adhesion between nanofibers and fabric substrates. The as-prepared Nylon 6 nanofiber-deposited woven fabrics were evaluated for adhesion strength and durability of nanofiber mats by carrying out peel strength and flex resistance tests. The test results showed significant improvement in the adhesion of nanofiber mats on woven fabric substrates. The nanofiber-deposited woven fabrics also exhibited good resistance to damage under repetitive flexion. X-Ray photoelectron spectroscopy and water contact angle analyses were conducted to study the plasma effect on the nanofibers and substrate fabric, and the results suggested that both the plasma pretreatment and plasma-electrospinning hybrid process introduced radicals, increased oxygen contents, and led to the formation of active chemical sites on the nanofiber and substrate surfaces. These active sites helped in creating crosslinking bonds between substrate fabric and electrospun nanofibers, which in turn increased the adhesion properties. The work demonstrates that the plasma-electrospinning hybrid process of nanofiber mats is a promising method to prepare durable functional materials.

Copper-encapsulated vertically aligned carbon nanotube arrays.

A new procedure is described for the fabrication of vertically aligned carbon nanotubes (VACNTs) that are decorated, and even completely encapsulated, by a dense network of copper nanoparticles. The process involves the conformal deposition of pyrolytic carbon (Py-C) to stabilize the aligned carbon-nanotube structure during processing. The stabilized arrays are mildly functionalized using oxygen plasma treatment to improve wettability, and they are then infiltrated with an aqueous, supersaturated Cu salt solution. Once dried, the salt forms a stabilizing crystal network throughout the array. After calcination and H2 reduction, Cu nanoparticles are left decorating the CNT surfaces. Studies were carried out to determine the optimal processing parameters to maximize Cu content in the composite. These included the duration of Py-C deposition and system process pressure as well as the implementation of subsequent and multiple Cu salt solution infiltrations. The optimized procedure yielded a nanoscale hybrid material where the anisotropic alignment from the VACNT array was preserved, and the mass of the stabilized arrays was increased by over 24-fold because of the addition of Cu. The procedure has been adapted for other Cu salts and can also be used for other metal salts altogether, including Ni, Co, Fe, and Ag. The resulting composite is ideally suited for application in thermal management devices because of its low density, mechanical integrity, and potentially high thermal conductivity. Additionally, further processing of the material via pressing and sintering can yield consolidated, dense bulk composites.

Atmospheric plasma application to improve adhesion of electrospun nanofibers onto protective fabric

Nylon 6 electrospun nanofibers were deposited on plasma-pretreated woven fabric substrates with the objective of improving adhesion between them. The prepared samples were evaluated for adhesion strength and durability of nanofiber mats by carrying out peel strength, flex resistance, and abrasion resistance tests. The test results showed significant improvement in the adhesion of nanofiber mats on woven fabric substrates due to atmospheric plasma pretreatment. The samples also exhibited good flex and abrasion resistance characteristics. X-ray photoelectron spectroscopy and water contact angle analyses indicate that plasma pretreatment introduces radicals, increases the oxygen content on the substrate surface, and leads to formation of active chemical sites that may be responsible for enhanced cross-linking between the substrate fabric and the electrospun nanofibers, which in turn increases the adhesion properties. The work demonstrates that the plasma treatment of the substrate fabric prior to deposition of electrospun nanofiber mats is a promising method to prepare durable functional materials.