Jozef Kaiser

Application of laser-induced breakdown spectroscopy to in situ analysis of liquid samples

A realization of laser-induced breakdown spectroscopy for real-time, in situ and remote analysis of trace amounts in liquid samples is described, which is potentially applicable to the analysis of pollutants in water in harsh or difficult-to-reach environments. Most of the measurements were conducted using a fiber assembly that is capable of both delivering the laser light and collecting the light emitted from the micro plasma, up to about 30 m from the target area. Alternatively, a telescopic arrangement for line-of-sight measurements was employed, with a range of 3 to 5 m. For internal standardization and the generation of concentration calibration curves, reference lines of selected elements were used. In the majority of cases calibration against the matrix element hydrogen was employed using the H?, H?, and H? lines, but also spiking with selected reference species was utilized. In order to provide high reliability and repeatability in the analyses, we also measured plasma parameters such as electron density, plasma temperature, and line- shape functions, and determined their influence on the measurement results. Numerous elements, including a range of toxic heavy metals, have been measured over a wide range of concentrations (Al, Cr, Cu, Pb, Tc, U, and others). Limits of detection usually were in the range of a few parts per million; for several elements even lower concentrations could be measured.

Quantitative laser-induced breakdown spectroscopy analysis of calcified tissue samples

Ž. We report on the application of laser-induced breakdown spectroscopy LIBS to the analysis of important minerals and the accumulation of potentially toxic elements in calcified tissue, to trace e.g. the influence of environmental exposure, and other medical or biological factors. This theme was exemplified for quantitative Ž detection and mapping of Al, Pb and Sr in representative samples, including teeth first teeth of infants, second teeth .Ž

The SYRMEP Beamline of Elettra: Clinical Mammography and Bio‐medical Applications

At the SYnchrotron Radiation for MEdical Physics (SYRMEP) beamline of Elettra Synchrotron Light Laboratory in Trieste (Italy), an extensive research program in bio‐medical imaging has been developed since 1997. The core program carried out by the SYRMEP collaboration concerns the use of Synchrotron Radiation (SR) for clinical mammography with the aim of improving the diagnostic performance of the conventional technique. The first protocol with patients, started in 2006 has been completed at the end of 2009 and the data analysis is now in progress.Regarding applications different from clinical imaging, synchrotron X‐ray computed microtomography (micro‐CT) is the most used technique, both in absorption and phase contrast. A new software tool, Pore3D, has been developed to perform a quantitative morphological analysis on the reconstructed slices and to access textural information of the sample under study.

Algal biomass analysis by laser-based analytical techniques - a review.

Algal biomass that is represented mainly by commercially grown algal strains has recently found many potential applications in various fields of interest. Its utilization has been found advantageous in the fields of bioremediation, biofuel production and the food industry. This paper reviews recent developments in the analysis of algal biomass with the main focus on the Laser-Induced Breakdown Spectroscopy, Raman spectroscopy, and partly Laser-Ablation Inductively Coupled Plasma techniques. The advantages of the selected laser-based analytical techniques are revealed and their fields of use are discussed in detail.

Modern Micro and Nanoparticle-Based Imaging Techniques

The requirements for early diagnostics as well as effective treatment of insidious diseases such as cancer constantly increase the pressure on development of efficient and reliable methods for targeted drug/gene delivery as well as imaging of the treatment success/failure. One of the most recent approaches covering both the drug delivery as well as the imaging aspects is benefitting from the unique properties of nanomaterials. Therefore a new field called nanomedicine is attracting continuously growing attention. Nanoparticles, including fluorescent semiconductor nanocrystals (quantum dots) and magnetic nanoparticles, have proven their excellent properties for in vivo imaging techniques in a number of modalities such as magnetic resonance and fluorescence imaging, respectively. In this article, we review the main properties and applications of nanoparticles in various in vitro imaging techniques, including microscopy and/or laser breakdown spectroscopy and in vivo methods such as magnetic resonance imaging and/or fluorescence-based imaging. Moreover the advantages of the drug delivery performed by nanocarriers such as iron oxides, gold, biodegradable polymers, dendrimers, lipid based carriers such as liposomes or micelles are also highlighted.

Sunflower Plants as Bioindicators of Environmental Pollution with Lead (II) Ions

In this study, the influence of lead (II) ions on sunflower growth and biochemistry was investigated from various points of view. Sunflower plants were treated with 0, 10, 50, 100 and/or 500 μM Pb-EDTA for eight days. We observed alterations in growth in all experimental groups compared with non-treated control plants. Further we determined total content of proteins by a Bradford protein assay. By the eighth day of the experiment, total protein contents in all treated plants were much lower compared to control. Particularly noticeable was the loss of approx. 8 μg/mL or 15 μg/mL in shoots or roots of plants treated with 100 mM Pb-EDTA. We also focused our attention on the activity of alanine transaminase (ALT), aspartate transaminase (AST) and urease. Activity of the enzymes increased with increasing length of the treatment and applied concentration of lead (II) ions. This increase corresponds well with a higher metabolic activity of treated plants. Contents of cysteine, reduced glutathione (GSH), oxidized glutathione (GSSG) and phytochelatin 2 (PC2) were determined by high performance liquid chromatography with electrochemical detection. Cysteine content declined in roots of plants with the increasing time of treatment of plants with Pb-EDTA and the concentration of toxic substance. Moreover, we observed ten times higher content of cysteine in roots in comparison with shoots. The observed reduction of cysteine content probably relates with its utilization for biosynthesis of GSH and phytochelatins, because the content of GSH and PC2 was similar in roots and shoots and increased with increased treatment time and concentration of Pb-EDTA. Moreover, we observed oxidative stress caused by Pb-EDTA in roots where the GSSG/GSH ratio was about 0.66. In shoots, the oxidative stress was less distinctive, with a GSSG/GSH ratio 0.14. We also estimated the rate of phytochelatin biosynthesis from the slope of linear equations plotted with data measured in the particular experimental group. The highest rate was detected in roots treated with 100 μM of Pb-EDTA. To determine heavy metal ions many analytical instruments can be used, however, most of them are only able to quantify total content of the metals. This problem can be overcome using laser induced breakdown spectroscopy, because it is able to provide a high spatial-distribution of metal ions in different types of materials, including plant tissues. Data obtained were used to assemble 3D maps of Pb and Mg distribution. Distribution of these elements is concentrated around main vascular bundle of leaf, which means around midrib.

Impact of Laser-Induced Breakdown Spectroscopy data normalization on multivariate classification accuracy

Multivariate data analysis (MVDA) is getting popular across the spectroscopic community. To assess accurate results, the obtained data should be preprocessed prior to utilization of any MVDA algorithm. The process of data normalization or “internal standardization” is widely used across a broad range of applications. In this manuscript we investigate the utilization of Laser-Induced Breakdown Spectroscopy (LIBS) coupled with MVDA. However, many articles regarding the use of MVDA on data from LIBS do not provide any information about the data pretreatment. This work describes the impact of LIBS data normalization approaches on MVDA classification accuracy. Also, the impact of classical data preprocessing (mean centering and scaling) exploiting the prior utilization of MVDA was studied. This issue was investigated exploiting simple soft independent modelling of class analogies algorithm. The findings were generalized for three sample matrices (steel, Al alloys, and sedimentary ores). Furthermore, the selection of an appropriate normalization algorithm is not trivial since the spectrum of each sample matrix is composed of a different number of elements and corresponding elemental lines.

Utilization of laser‐assisted analytical methods for monitoring of lead and nutrition elements distribution in fresh and dried Capsicum annuum l. leaves

Laser induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) have been applied for high‐resolution mapping of accumulation and distribution of heavy metal (lead) and nutrition elements (potassium, manganese) in leaves of Capsicum annuum L. samples. Lead was added in a form of Pb(NO3)2 at concentration up to 10 mmol L−1 into the vessels that contained tap water and where the 2‐months old Capsicum annuum L. plants were grown another seven days. Two dimensional maps of the elements are presented for both laser‐assisted analytical methods. Elemental mapping performed on fresh (frozen) and dried Capsicum annuum L. leaves are compared. Microsc. Res. Tech., 2011.

Multielemental analysis of prehistoric animal teeth by laser-induced breakdown spectroscopy and laser ablation inductively coupled plasma mass spectrometry

Laser-induced breakdown spectroscopy (LIBS) and laser ablation (LA) inductively coupled plasma (ICP) mass spectrometry (MS) were utilized for microspatial analyses of a prehistoric bear (Ursus arctos) tooth dentine. The distribution of selected trace elements (Sr, Ba, Fe) was measured on a 26 mm×15 mm large and 3 mm thick transverse cross section of a canine tooth. The Na and Mg content together with the distribution of matrix elements (Ca, P) was also monitored within this area. The depth of the LIBS craters was measured with an optical profilometer. As shown, both LIBS and LA-ICP-MS can be successfully used for the fast, spatially resolved analysis of prehistoric teeth samples. In addition to microchemical analysis, the sample hardness was calculated using LIBS plasma ionic-to-atomic line intensity ratios of Mg (or Ca). To validate the sample hardness calculations, the hardness was also measured with a Vickers microhardness tester.

Damage and ablation of large bandgap dielectrics induced by a 46.9 nm laser beam

We applied a 0.3 mJ, 1.7 ns, 46.9 nm soft-x-ray argon laser to ablate the surface of large bandgap dielectrics: CaF2 and LiF crystals. We studied the ablation versus the fluence of the soft-x-ray beam, varying the fluence in the range 0.05-3 J/cm2. Ablation thresholds of 0.06 and 0.1 J/cm2 and ablation depths of 14 and 20 nm were found for CaF2 and LiF, respectively. These results define new ablation conditions for these large bandgap dielectrics that can be of interest for the fine processing of these materials.