Ju Tsung Liu

Rapid drug-screening of clandestine tablets by MALDI-TOF mass spectrometry

A novel method for the rapid screening of clandestine tablets for drugs by MALDI-TOF mass spectrometry is described. In this method, cetrimonium bromide (CTAB), a surfactant, is added to the conventional alpha-cyano-4-hydroxycinnamic acid (CHCA) matrix solution used in preparing the MALDI samples. This procedure allows very clean mass spectra to be collected for amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA), caffeine, ketamine and tramadol. The method was used successfully in the rapid drug-screening of some actual clandestine tablets, which had been seized from the illicit market, and can serve as a good complementary method to GC/MS for use in forensic analysis.

A general approach to the screening and confirmation of tryptamines and phenethylamines by mass spectral fragmentation

Certain characteristic fragmentations of tryptamines (indoleethylamine) and phenethylamines are described. Based on the GC-EI/MS, LC-ESI/MS and MALDI/TOFMS, the mass fragmentations of 13 standard compounds, including alpha-methyltryptamine (AMT), N,N-dimethyltryptamine (DMT), 5-methoxy-alpha-methyltryptamine (5-MeO-AMT), N,N-diethyltryptamine (DET), N,N-dipropyltryptamine (DPT), N,N-dibutyltryptamine (DBT), N,N-diisopropyltryptamine (DIPT), 5-methoxy-N,N-dimethyltryptamine (5-MeO-DMT), 5-methoxy-N,N-diisopropyltryptamine (5-MeO-DIPT), methamphetamine (MAMP), 3,4-methylenedioxyamphetamine (3,4-MDA), 3,4-methylenedioxymethamphetamine (3,4-MDMA) and 2-methylamino-1-(3,4-methylenedioxyphenyl)butane (MBDB), were compared. As a result, the parent ions of these analytes were hard to be obtained by GC/MS whereas the protonated molecular ions can be observed clearly by means of ESI/MS and MALDI/TOFMS. Furthermore, two major characteristic fragmentations, namely and alpha-cleavage ([M+H](+)-->[3-vinylindole](+)) and beta-cleavage ([M+H](+)-->[CH(2)N(+)R(N1)R(N2)]), are produced when the ESI and MALDI modes are used, respectively. In the case of ESI/MS, the fragment obtained from alpha-cleavage is the major process. In contrast to this, in the case of MALDI/TOFMS, the major fragment is produced via beta-cleavage. The ionization efficiency and fragments formed from either alpha- or beta-cleavages are closely related to the degree of alkylation of the side chain nitrogen in both cases.

Applications of Hadamard transform to gas chromatography/mass spectrometry and liquid chromatography/mass spectrometry

Successful application of the Hadamard transform (HT) technique to gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/mass spectrometry (LC/MS) is described. Novel sample injection devices were developed to achieve multiple sample injections in both GC and LC instruments. Air pressure was controlled by an electromagnetic valve in GC, while a syringe pump and Tee connector were employed for the injection device in LC. Two well-known, abused drugs, 3,4-methylenedioxy-N-methylamphetamine (MDMA) and N, N-dimethyltryptamine (DMT), were employed as model samples. Both of the injection devices permitted precise successive injections, resulting in clearly modulated chromatograms encoded by Hadamard matrices. After inverse Hadamard transformation of the encoded chromatogram, the signal-to-noise (S/N) ratios of the signals were substantially improved compared with those expected from theoretical values. The S/N ratios were enhanced approximately 10-fold in HT-GC/MS and 6.8 in HT-LC/MS, using the matrices of 1023 and 511, respectively. The HT-GC/MS was successfully applied to the determination of MDMA in the urine sample of a suspect.

Rapid screening and determination of designer drugs in saliva by a nib-assisted paper spray-mass spectrometry and separation technique.

A method for the rapid screening and determination of amphetamine-type designer drugs in saliva by a novel nib-assisted paper spray-mass spectrometry procedure is described. Under optimized conditions, the limit of detections for amphetamine derivatives (model samples: o-, m-, p-chloroamphetamine and o-, m-, p-fluoroamphetamine, respectively) were determined to 0.1 μg/mL by the nib-assisted paper spray-mass spectrometry method. This method is easier and has a higher sensitivity than similar methodologies, including atmospheric pressure/matrix-assisted laser desorption ionization mass spectrometry and electrospray-assisted laser desorption ionization/mass spectrometry. Data obtained using more classical separation methods, including liquid chromatography and capillary electrophoresis, are also reported.

Rapid screening and determination of 4-chloroamphetamine in saliva by paper spray-mass spectrometry and capillary electrophoresis-mass spectrometry

A novel drug‐screening system, consisting of paper spray‐MS (PS‐MS) and a CE‐ESI‐MS method was developed. This system can be easily switched either to PS‐MS for rapidly screening samples or to the traditional CE‐ESI‐MS method for separation and to obtain detailed mass spectral information, while sharing the same mass spectrometer. In the former case, when a sharp (15°‐tip) chromatography paper was used, the optimized distance from the paper tip to the mass inlet was 7.7 mm, whereas the optimized distance for the CE‐ESI tip was ∼13.5 mm. Using 4‐chloroamphetamine as a model compound, the LODs for PS‐MS and CE‐ESI‐MS were determined to ∼0.1 and 0.25 ppm, respectively. Comparisons of results obtained using PS‐MS and CE‐ESI‐MS and the experimental conditions are described.

Determination of nitroaromatic explosives residue at military shooting ranges using a sweeping-MEKC method

We report on the application of sweeping‐MEKC, for the first time, using the Environmental Protection Agency Method 8330 stock standard (a mixture of 14 explosives). The use of a traditional MEKC mode provided the LODs (at S/N=3) ranging from 1.5 to 2.9u2009μg/mL for the 14 explosives standards, which were improved by as low as 3.1–6.5u2009ng/mL when a sweeping‐MEKC technique was used. A set of 21 soil samples were collected from surface soil at military shooting ranges located at Kinmen County in Taiwan, and the findings showed that hexahydro‐1,3,5‐trini‐tro‐1,3,5‐triazine and 2,4,6‐trinitrotoluene made up the explosives residue present at the highest concentrations. This study is very useful for determining current levels of explosives residue and as a reference for making appropriate recommendations concerning future site characterization techniques.

Separation of crystal violet dyes and its application to pen ink analysis using CZE and MEKC methods

A crystal violet (CV) standard was irradiated under a Hg-Cd lamp for different exposure times to obtain various N-demethylation products. CZE effectively separated the photodegradation products based on molecular weight differences. In contrast, micellar EKC (MEKC), using SDS as the surfactant, was ineffective because the binding constants of the demethylation products and SDS were too close for separation. Nevertheless, MEKC analysis of ink has applications in forensic science because MEKC separated neutral components in the inks. Thus, MEKC can be used to obtain an ink fingerprint since each ink is unique depending on the location and time it was made. In contrast, CZE is useful for dating inks because CV is the primary ink dye and it photodegrades slowly.

Optimization of separation and online sample concentration of N,N-dimethyltryptamine and related compounds using MEKC

The optimal separation conditions and online sample concentration for N,N-dimethyltryptamine (DMT) and related compounds, including alpha-methyltryptamine (AMT), 5-methoxy-AMT (5-MeO-AMT), N,N-diethyltryptamine (DET), N,N-dipropyltryptamine (DPT), N,N-dibutyltryptamine (DBT), N,N-diisopropyltryptamine (DiPT), 5-methoxy-DMT (5-MeO-DMT), and 5-methoxy-N,N-DiPT (5-MeO-DiPT), using micellar EKC (MEKC) with UV-absorbance detection are described. The LODs (S/N = 3) for MEKC ranged from 1.0 1.8 microg/mL. Use of online sample concentration methods, including sweeping-MEKC and cation-selective exhaustive injection-sweep-MEKC (CSEI-sweep-MEKC) improved the LODs to 2.2 8.0 ng/mL and 1.3 2.7 ng/mL, respectively. In addition, the order of migration of the nine tryptamines was investigated. A urine sample, obtained by spiking urine collected from a human volunteer with DMT, was also successfully examined.

Comparison of the separation of nine tryptamine standards based on gas chromatography, high performance liquid chromatography and capillary electrophoresis methods

Nine tryptamines, including alpha-methyltryptamine (AMT), N,N-dimethyltryptamine (DMT), 5-methoxy-alpha-methyltryptamine (5-MeO-AMT), N,N-diethyltryptamine (DET), N,N-dipropyltryptamine (DPT), N,N-dibutyltryptamine (DBT), N,N-diisopropyltryptamine (DIPT), 5-methoxy-N,N-dimethyltryptamine (5-MeO-DMT), and 5-methoxy-N,N-diisopropyltryptamine (5-MeO-DIPT) were selected as model compounds. Comparisons of their sensitivity, selectivity, time, cost and the order of migration are described based on different separation techniques (GC, HPLC and CE, respectively). As a result, the limit of detection (S/N=3) obtained by GC/MS and LC/UV-absorption ranged from 0.5 to 15 microg/mL and 0.3 to 1.0 microg/mL, respectively. In contrast to this, based on the CZE/UV-absorption method, the limit of detection (S/N=3) was determined to 0.5-1 microg/mL. However, when the sweeping-MEKC mode was applied, it dramatically improved to 2-10 ng/mL. In the case of GC, HPLC and CE, migration times of the nine standards ranged from 11 to 15 min and 8 to 23 min by GC and HPLC, respectively; ranged from 20 to 26 min by sweeping-MEKC. The order of migration of DMT, DET, DPT and DBT follows the molecular weight, whereas the order of migration of AMT and 5-MeO-AMT (primary amines), DIPT (an isomer of DPT) and 5-methoxy-tryptamines (5-MeO-AMT, 5-MeO-DMT and 5-MeO-DIPT) can be altered by changing the separation conditions.

A microwave-assisted fluorescent labeling method for the separation and detection of amphetamine-like designer drugs by capillary electrophoresis

A microwave-assisted fluorescence labeling method for use in CE-LIF (capillary electrophoresis-laser induced fluorescence) is described. Six amphetamine-like designer drugs, namely, o-, m-, p-chloro- and o-, m-, p-fluoro-amphetamine derivatives, were synthesized and used as model compounds. FITC (fluorescein isothiocyanate isomer I) and a blue-laser were used as the fluorescent labeling reagent and excitation source, respectively. When a microwave oven was used, the reaction was complete within ∼5 min, while the classical method required at least 20 h (usually, an overnight reaction). A mimic oral fluid sample was obtained by spiking oral fluid from a volunteer with the six standards, and after liquid-liquid extraction and microwave-derivatization, it was possible to process the analytes by CE-LIF within a period of ∼10 min; the wavelength of the blue-laser used was 473 nm. For comparison, data obtained using classical methods, including CZE-UV (capillary zone electrophoresis-UV absorbance detection), sweeping-MEKC-UV (micellar electrokinetic chromatography-UV absorbance detection) and LC-Q-TOFMS (liquid chromatography/electrospray ionization quadrupole time-of-flight mass spectrometry) are also reported.