Juan M. Rodríguez Patino

Implications of interfacial characteristics of food foaming agents in foam formulations

The manufacture of food dispersions (emulsions and foams) with specific quality attributes depends on the selection of the most appropriate raw materials and processing conditions. These dispersions being thermodynamically unstable require the use of emulsifiers (proteins, lipids, phospholipids, surfactants etc.). Emulsifiers typically coexist in the interfacial layer with specific functions in the processing and properties of the final product. The optimum use of emulsifiers depends on our knowledge of their interfacial physico-chemical characteristics - such as surface activity, amount adsorbed, structure, thickness, topography, ability to desorb (stability), lateral mobility, interactions between adsorbed molecules, ability to change conformation, interfacial rheological properties, etc. -, the kinetics of film formation and other associated physico-chemical properties at fluid interfaces. These monolayers constitute well defined systems for the analysis of food colloids at the micro- and nano-scale level, with several advantages for fundamental studies. In the present review we are concerned with the analysis of physico-chemical properties of emulsifier films at fluid interfaces in relation to foaming. Information about the above properties would be very helpful in the prediction of optimised formulations for food foams. We concluded that at surface pressures lower than that of monolayer saturation the foaming capacity is low, or even zero. A close relationship was observed between foaming capacity and the rate of diffusion of the foaming agent to the air-water interface. However, the foam stability correlates with the properties of the film at long-term adsorption.

Protein–emulsifier interactions at the air–water interface

Abstract The main interfacial physico-chemical characteristics and the kinetics of the formation of protein and emulsifier mixed films at the air–water interface are reviewed. Recent advances include the development of new molecular resolution and spectroscopic techniques coupled with surface rheological instruments and the incipient development of computer simulation of the displacement of proteins by emulsifiers.

Stability and mechanical strength of aqueous foams containing food proteins

Abstract The role of proteins in the formation and stabilization of foams is important in many food applications. Most such products are made with egg white or milk proteins as emulsifiers. This study is concerned with the foaming properties of high-quality caseins and ovalbumin, as model food systems. The foaming properties (foam strength and stability) were evaluated in an aeration column (bubbling method). Foams were generated with several well-known food proteins: casein, acid casein, sodium caseinate, calcium caseinate, and ovalbumin. Experimental conditions varied as follows: (a) temperature between 5 and 40°C; (b) protein concentration from 0.01 to 1% (w/w); (c) pH between 2 and 9; and (d) ethanol and sucrose were added to distilled water to produce solutions of concentrations between 0 and 1 M. A second-order kinetics model is a satisfactory mathematical description of the foam drainage behaviour, so the discussion of the results is based on the second-order rate constant for drainage. It was observed that intrinsic molecular properties (the nature and extent of protein-protein interactions), as well as environmental and processing factors (temperature, pH and viscosity of the continuous phase) affected the foaming properties. Moreover, foams with enhanced mechanical strength (greater protein-protein interactions) were more stable.

Interfacial characteristics of β-casein spread films at the air–water interface☆

Casein is well known to be a good protein emulsifier and β-casein is the major component of casein and commercial sodium caseinate. This work studies the behaviour of β-casein at the interface. The interfacial characteristics (structure and stability) of β-casein spread films have been examined at the air–water interface in a Langmuir-type film balance, as a function of temperature (5–40°C) and aqueous phase pH (pH 5 and 7). From surface pressure–area isotherms (π–A isotherms) as a function of temperature we can draw a phase diagram. β-Casein spread films present two structures and the collapse phase. That is, there is a critical surface pressure and a surface concentration at which the film properties change significantly. This transition depends on the temperature and the aqueous phase pH. The film structure was observed to be more condensed and β-casein interfacial density was higher at pH 5. β-Casein films were stable at surface pressures lower than equilibrium surface pressure. In fact, no hysteresis was observed in π–A isotherms after continuous compression-expansion cycles or over time. The relative area relaxation at constant surface pressure (10 or 20 mN m−1) and the surface pressure relaxation at constant area near the monolayer collapse, can be fitted by two exponential equations. The characteristic relaxation times in β-casein films can be associated with conformation–organization changes, hydrophilic group hydration and/or surface rheology, as a function of pH.

Dynamic properties of soy globulin adsorbed films at the air-water interface

In this paper we present surface dilatational properties of soy globulins (beta-conglycinin, glycinin, and reduced glycinin with 10 mM of dithiothreitol (DTT)) adsorbed onto the air-water interface, as a function of adsorption time. The experiments were performed at constant temperature (20 degrees C), pH (8.0), and ionic strength (0.05 M). The surface rheological parameters were measured as a function of protein concentration (ranging from 1 to 1x10(-3)% wt/wt). We found that the surface dilatational modulus, E, increases, and the phase angle, phi, decreases with time, theta, which may be associated with protein adsorption. These phenomena have been related to protein adsorption, unfolding, and/or protein-protein interactions (at long-term adsorption) as a function of protein concentration in solution. From a rheological point of view, the surface viscoelastic characteristics of soy globulin films adsorbed at the air-water interface are practically elastic. The main conclusion is that the dilatational properties of the adsorbed films depend on the molecular structure of the protein.

Interfacial and foaming characteristics of protein—lipid systems

Abstract In this work, we studied interfacial properties (surface tension, σ , and critical micelle concentration, CMC), foaming properties (foam strength andfoam stability), and foam microscopical examination of aqueous solutions of Tween 20 and/or bovine serum albumin (BSA) and casein. Temperature, Tween 20 concentration in the aqueous phase, protein—lipid ratio and the aqueous phase composition (water, and NaCl solutions at 0.1 and 0.5 mol/dm 3 ) were the variables studied. The CMC of Tween 20 was determined by surface tension measurements using a Kruss tensiometer (Wilhelmy plate method). The foaming properties (foam strength and stability) were evaluated in an aeration column (bubbling method). Microscopicalfoam observation was performed in a specially designed cell. Tween 20 is able to form micelles in dilute aqueous solutions. The results show that the temperature dependence on CMC depends on the subphase composition, but the σ values do decrease as temperature increases. The CMC and the c values also depend on the solute in the aqueous solutions. The lipid—protein interactions at the interface depend on both the Tween 20 concentration (C) and the solute in bulk phase. In water and aqueous solutions of NaCl, the σ values decrease in the presence of protein at C CMC. Foam properties depend on the protein used, the protein—lipid ratio and the presence of NaCl in the aqueous phase. A direct relationship between foaming characteristics and the CMC of the Tween 20 was observed.

Milk whey proteins and xanthan gum interactions in solution and at the air-water interface: A rheokinetic study

In this contribution, we present experimental information about the effect of xanthan gum (XG) on the adsorption behaviour of two milk whey protein samples (MWP), beta-lactoglobulin (beta-LG) and whey protein concentrate (WPC), at the air-water interface. The MWP concentration studied corresponded to the protein bulk concentration which is able to saturate the air-water interface (1.0 wt%). Temperature, pH and ionic strength of aqueous systems were kept constant at 20 degrees C, pH 7 and 0.05 M, respectively, while the XG bulk concentration varied in the range 0.00-0.25 wt%. Biopolymer interactions in solution were analyzed by extrinsic fluorescence spectroscopy using 1-anilino-8-naphtalene sulphonic acid (ANS) as a protein fluorescence probe. Interfacial biopolymer interactions were evaluated by dynamic tensiometry and surface dilatational rheology. Adsorption behaviour was discussed from a rheokinetic point of view in terms of molecular diffusion, penetration and conformational rearrangement of adsorbed protein residues at the air-water interface. Differences in the interaction magnitude, both in solution and at the interface vicinity, and in the adsorption rheokinetic parameters were observed in MWP/XG mixed systems depending on the protein type (beta-LG or WPC) and biopolymer relative concentration. beta-LG adsorption in XG presence could be promoted by mechanisms based on biopolymer segregative interactions and thermodynamic incompatibility in the interface vicinity, resulting in better surface and viscoelastic properties. The same mechanism could be responsible of WPC interfacial adsorption in the presence of XG. The interfacial functionality of WPC was improved by the synergistic interactions with XG, although WPC chemical complexity might complicate the elucidation of molecular events that govern adsorption dynamics of WPC/XG mixed systems at the air-water interface.

RELAXATION PHENOMENA IN MONOGLYCERIDE FILMS AT THE AIR-WATER INTERFACE

Abstract Monoglycerides are the most commonly used surfactants in the food industry in traditional food, low-fat products and instant foods. In this work we are essentially concerned with the study of the stability in monoglyceride monolayers (monopalmitin, monoolein and monolaurin) as a function of surface pressure (10 and 20 mN.m−1) and aqueous phase pH (pH 5 and 7). Monolayer stability was determined in an automated Langmuir-type film balance at constant temperature (20 and 40°C). The rate of monolayer molecular loss increases with surface pressure, and is pH dependent. Molecular loss at the interface also depends on the lipid. In the discussion, special attention will be given to the effect of the hydrocarbon chain length and the presence of a double bond in the hydrocarbon chain. Monopalmitin monolayers are more stable than those of monoolein and monolaurin. Maximum instability was observed with monolaurin monolayers. Two kinds of experiment have been performed to analyse relaxation mechanisms. In one, the surface pressure is kept constant, and the area is measured as a function of time. In the second, the area is kept constant at monolayer collapse and the surface pressure decreases. This decrease is measured as a function of time. Various relaxation mechanisms, including monolayer molecular loss by dissolution and/or collapse, can be fitted to the results derived from these experiments.

Interactions in the aqueous phase and adsorption at the air–water interface of caseinoglycomacropeptide (GMP) and β-lactoglobulin mixed systems

The aim of this work was to study the interactions and adsorption of caseinoglycomacropeptide (GMP) and GMP:beta-lactoglobulin (beta-lg) mixed system in the aqueous phase and at the air-water interface. The existence of associative interactions between GMP and beta-lg in the aqueous phase was investigated by dynamic light scattering, differential scanning calorimetry (DSC), fluorometry and native PAGE-electrophoresis. The surface pressure isotherm and the static and dynamic surface pressure were determined by tensiometry and surface dilatational properties. The results showed that GMP presented higher surface activity than beta-lg at a concentration of 4%wt but beta-lg showed higher film forming ability. In the mixed systems beta-lg dominated the static and dynamic surface pressure and the rheological properties of interfacial films suggesting that beta-lg hinders GMP adsorption because, in simple competition, GMP should dominate because of its higher surface activity. The surface predominance of beta-lg can be attributed to binding of GMP to beta-lg in the aqueous phase that prevents GMP adsorption on its own.

Effect of sucrose on functional properties of soy globulins: adsorption and foam characteristics.

In this contribution, we have analyzed the effect of sucrose on dynamic interfacial (dynamic surface pressure and surface dilatational properties) and foaming (foam capacity and foam stability) characteristics of soy globulins (7S and 11S). The protein (at 1 x 10(-3), 1 x 10(-2), 0.1, and 1 wt %) and sucrose (at 0, 0.25, 0.5, and 1.0 M) concentrations in aqueous solution and the pH (at 5 and 7), and ionic strength (at 0.05 and 0.5 M) were analyzed as variables. The temperature was maintained constant at 20 degrees C. We have observed the following. (i) The dynamics of adsorption (presence of a lag period, diffusion, and penetration at the air-water interface) of soy globulins depend on the peculiar molecular features of proteins (7S or 11S soy globulin) and the level of association/dissociation of these proteins by varying the pH and ionic strength, as well as the effect of sucrose in the aqueous phase on the unfolding of the protein. The rate of adsorption increases with the protein concentration in solution, at pH 7 compared to pH 5, at high ionic strength, and in the absence of sucrose. (ii) The surface dilatational properties reflect the fact that soy globulin adsorbed films exhibit viscoelastic behavior. The surface dilatational modulus increases at pH 7 compared to pH 5, but decreases with the addition of sucrose into the aqueous phase. (iii) The rate of adsorption and surface dilatational properties (surface dilatational modulus and phase angle) during adsorption at the air-water interface play an important role in the formation of foams generated from aqueous solutions of soy globulins. (iv) The increased interfacial adsorption (at high surface pressures) and the combined effects of interfacial adsorption and interfacial interactions between adsorbed soy globulin molecules (at high surface dilatational modulus) can explain the higher stability of the foam, with few exceptions.