Jue Lu

Nanometal-decorated exfoliated graphite nanoplatelet based glucose biosensors with high sensitivity and fast response.

We report the novel fabrication of a highly sensitive, selective, fast responding, and affordable amperometric glucose biosensor using exfoliated graphite nanoplatelets (xGnPs) decorated with Pt and Pd nanoparticles. Nafion was used to solubilize metal-decorated graphite nanoplatelets, and a simple cast method with high content organic solvent (85 wt %) was used to prepare the biosensors. The addition of precious metal nanoparticles such as platinum (Pt) and palladium (Pd) to xGnP increased the electroactive area of the electrode and substantially decreased the overpotential in the detection of hydrogen peroxide. The Pt-xGnP glucose biosensor had a sensitivity of 61.5+/-0.6 microA/(mM x cm(2)) and gave a linear response up to 20 mM. The response time and detection limit (S/N=3) were determined to be 2 s and 1 microM, respectively. Therefore, this novel glucose biosensor based on the Pt nanoparticle coated xGnP is among the best reported to date in both sensing performance and production cost. In addition, the effects of metal nanoparticle loading and the particle size on the biosensor performance were systematically investigated.

Conductive oxygen barrier films using supramolecular assembly of graphene embedded polyelectrolyte multilayers

The supramolecular self-assembly of polyelectrolyte multilayers (PEMs) provides robust bottom-up strategies to assemble a broad spectrum of nanostructures on the host substrates. In this study, we discuss the formation of graphene nanoplatelet (GNP) embedded polyelectrolyte films to enhance the oxygen barrier properties of poly(ethylene terephthalate) (PET) films. Despite cheaper costs and high mechanical strength, the diffusion of small gas molecules such as oxygen through PET films remains a matter of great concern. The simple yet robust supramolecular deposition of GNP/polyelectrolyte on PET substrates significantly increases the tortuous path the oxygen molecule has to travel, making it harder to diffuse through the PET film. With permeability coefficients in the range of 10-18 cc cm/cm(2) s Pa, the coatings developed in this study show three orders of magnitude reduction as compared to the permeability coefficient of the bare PET film, significantly lower than that of ethylene vinyl alcohol (EVOH) and comparable to silicon oxide thin films used in commercial gas barrier foils. The use of GNPs in the multilayered films also helped reduce the electrical sheet resistance to about 1MΩ which is five orders of magnitude lower than the original PET substrate opening up promising opportunities for future use in semiconductor and electronics industry. Making suitable modifications in the deposition process, three configurations of GNP embedded PEM multilayers namely hydrogen bonded, electrostatic, and composite films were developed and their effect on oxygen barrier property and sheet resistance was monitored. Oxygen permeability of films was tested in accordance with ASTM D-3985 using a MOCON 2/21 ML instrument, whereas electrical sheet resistance was quantified using a Gamry Femtostat Electrochemical Impedance station.

Stable aqueous suspension and self-assembly of graphite nanoplatelets coated with various polyelectrolytes

Exfoliated graphite nanoplatelets (xGnPs) with an average thickness of 1-10 nm present an inexpensive alternative to carbon nanotubes in many applications. In this paper, stable aqueous suspension of xGnP was achieved by noncovalent functionalization of xGnP with polyelectrolytes. The surfactants and polyelectrolytes were compared with respect to their ability to suspend graphite nanoplatelets. The surface charge of the nanoplatelets was characterized with zeta potential measurements, and the bonding strength of the polymer chains to the surface of xGnP was characterized with Raman spectroscopy. This robust method opens up the possibility of using this inexpensive nanomaterial in many applications, including electrochemical devices, and leads to simple processing techniques such as layer-by-layer deposition. Therefore, the formation of xGnP conductive coatings using layerby-layer deposition was also demonstrated.

Enhancement of Ultrahigh Performance Concrete Material Properties with Carbon Nanofiber

Ultrahigh performance concrete (UHPC) realized distinctly high mechanical, impermeability, and durability characteristics by reducing the size and content of capillary pore, refining the microstructure of cement hydrates, and effectively using fiber reinforcement. The dense and fine microstructure of UHPC favor its potential to effectively disperse and interact with nanomaterials, which could complement the reinforcing action of fibers in UHPC. An optimization experimental program was implemented in order to identify the optimum combination of steel fiber and relatively low-cost carbon nanofiber in UHPC. The optimum volume fractions of steel fiber and carbon nanofiber identified for balanced improvement of flexural strength, ductility, energy sorption capacity, impact, and abrasion resistance of UHPC were 1.1% and 0.04%, respectively. Desired complementary/synergistic actions of nanofibers and steel fibers in UHPC were detected, which were attributed to their reinforcing effects at different scales, and the potential benefits of nanofibers to interfacial bonding and pull-out behavior of fibers in UHPC. Modification techniques which enhanced the hydrophilicity and bonding potential of nanofibers to cement hydrates benefited their reinforcement efficiency in UHPC.

A New Self-Loading Locomotion Mechanism for Wall Climbing Robots Employing Biomimetic Adhesives

A versatile locomotion mechanism is introduced and experimentally verified. This mechanism comprises four rectangular wheels (legs) with rotational phase difference which enables the application of pressure to each contacting surface for securing it to the surface using bio-inspired or pressure-sensitive adhesives. In this mechanism, the adhesives are applied to two rigid plates attached to each wheel via hinges incorporating torsional springs. The springs force the plates back to their original position after the contact with the surface is lost in the course of locomotion. The wheels are made of low-modulus elastomers, and the pressure applied during contact is controlled by the elastic modulus, geometry and phase difference of wheels. This reliable adhesion system does not rely upon gravity for adhering to surfaces, and provides the locomotion mechanism with the ability to climb walls and transition from horizontal to vertical surfaces.

Dynamic encapsulation of hydrophilic nisin in hydrophobic poly (lactic acid) particles with controlled morphology by a single emulsion process.

Hydrophilic nisin-loaded hydrophobic poly (lactic acid) (PLA) particles with controlled size and shape were successfully produced utilizing a one-step single emulsification method. Preliminary shear stress and temperature tests showed that there was no significant loss in the nisin inhibition activity during this process. PLA/nisin composite particles were prepared into solid nanocomposite spheres (50-200 nm) or hollow microcomposite spheres (1-5 μm) under the operative conditions developed in our previous study, in which the hydrophilic nisin in the aqueous phase solution could be entrapped in the hydrophobic polymer in the emulsification process generating either single or multiple emulsions. The incorporation of nisin in PLA had little effect on key processing conditions, which allows the dynamic control of the morphology and property of resulting particles. Microscopic and surface analyses suggested that nisin was dispersed uniformly inside the polymer matrix and adsorbed on the particle surface. The encapsulation amount and efficiency were enhanced with the increase in nisin loading in the aqueous solution. Unique reversible control of particle size and shape by this process was successfully applied in the nisin encapsulation. Alternating temperature in the repeating emulsification steps improved the encapsulation efficiency while generated particles in desired size and shape.

Enzyme production by the mixed fungal culture with nano-shear pretreated biomass and lignocellulose hydrolysis.

Cellulase, xylanase, and β‐glucosidase production was studied on novel nano‐shear pretreated corn stover by the mixed fungi culture. The high shear force from a modified Tayor‐Couette nano‐shear mixing reactor efficiently disintegrated corn stover, resulting in a homogeneous watery mash with particles in much reduced size. Scanning electron microscope study showed visible mini‐pores on the fiber cell wall surface, which could improve the accessibility of the pretreated corn stover to microorganisms. Mixed fungal culture of Trichoderma reesei RUT‐C30 and Aspergillus niger produced enzymes with higher cellulolytic and xylanolytic activities on corn stover pretreated with nano‐shear mixing reactor, in comparison with other pretreatment methods, including acid and ammonia fiber explosion (AFEX) pretreatment. The hydrolytic potential of the whole fermentation broth from the mixed fungi was studied, and the possibility of applying the whole cell saccharification concept was also investigated to further reduce the cost of lignocellulose hydrolysis. Biotechnol. Bioeng. 2013; 110: 2123–2130.

Carbon nanotubes tuned foam structures as novel nanostructured biocarriers for lignocellulose hydrolysis

The use of immobilized enzymes during saccharification of lignocelluloses enables the continuous process of enzymatic hydrolysis and repeatable use of enzyme, resulting in reduced operational cost. Novel nano-biocarriers were developed by layer-by-layer deposition of carbon nanotube (CNT) on the foam structures, and their efficiency for enzyme immobilization was demonstrated with cellulase and β-glucosidase. A three-fold enhancement was achieved in the activity of cellulase immobilized on CNT coated polyurethane foam. In addition, both cellulase and β-glucosidase immobilized on the CNT-foam showed much better storage stability and operational stability than the ones immobilized on the commercial biocarrier (Celite), which is critical for a continuous operation. CNT coated monolith was also developed as a biocarrier, offering high surface area and geometric stability. These nano-biocarriers are promising candidates for the efficient saccharification of biomass and to reduce carbon footprint and cost of the equipment.

Recent Progress in the Development of Novel Nanostructured Biosensors for Detection of Waterborne Contaminants

Rapid industrialization and exploitation of natural resources to accommodate for the demands of the increasing human population have contributed to large-scale contamination of the ecosystem. The presence of environmental contaminants and toxins in the ecosystem can have a deleterious effect on human health. To counter this, there is a need to come up with effective strategies to detect and quantify the presence of these pollutants in the environment. In this review, the contribution of the evolving science of nanobiotechnology for precise sensing and quantification of waterborne contaminants will be presented. The use of portable nanobiosensors capable of instant field tests would help in screening sources of drinking water, thus eliminating the need for expensive analytical instruments. Recent advances in nanotechnology tools have enabled the fabrication of integrated nanostructured bioelectronic interfaces that are capable of sensing minute concentrations of specific analytes. The sensing principles and the quantification capability of the sensor depend on the type of nanomaterial used, its morphology, as well as the microenvironment surrounding the biological component. Nano-architectures that enable increased interaction between the desired analyte and the biological component followed by effective signal transduction to the electronic component help to improve the sensitivity and the response of the sensor. In this review, recent progress in the development of nanomaterial incorporated transducer components and biorecognition elements will be discussed. Finally, this review will also provide future research directions for the fabrication of improved, fast-acting sensitive nanobiosensors.