Julian F. Tyson

Selenium speciation in enriched and natural samples by HPLC-ICP-MS and HPLC-ESI-MS with perfluorinated carboxylic acid ion-pairing agents.

Selenium-enriched plants, such as hyperaccumulative phytoremediation plants (Astragalus praleongus, 517 micrograms g-1 Se, and Brassica juncea, 138 micrograms g-1 Se in dry sample), yeast (1200, 1922 and 2100, micrograms g-1 Se in dry sample), ramp (Allium tricoccum, 48, 77, 230, 252, 405 and 524 micrograms g-1 Se in dry sample), onion (Allium cepa, 96 and 140 micrograms g-1 Se in dry sample) and garlic (Allium sativum, 68, 112, 135, 296, 1355 micrograms g-1 Se in dry sample) were analyzed by HPLC-ICP-MS for their selenium content and speciation after hot water and enzymatic extractions. Reference samples with natural selenium levels, such as onion and garlic controls, cooking garlic powder, baking yeast powder and a commercial garlic supplement were also analyzed. Selected samples were also examined by HPLC-electrospray ionization (ESI)-MS. HPLC was mostly carried out with 0.1% heptafluorobutanoic acid (HFBA) as ion-pairing agent in 1 + 99 v/v methanol-water solution, but 0.1% trifluoroacetic acid (TFA) in 1 + 99 v/v methanol-water solution was also utilized to permit chromatography for compounds that did not elute with HFBA. More than 75% of the total eluting selenium compounds, based upon element specific detection, were identified from retention time data and standard spiking experiments, and between 60 and 85% of compounds were identified by MS, with up to 25% of the total eluting molecular selenium species being unidentified as yet. Limits of quantification (LOQ, defined as the concentration giving an S/N of 10) for HPLC-ICP-MS were in the range 2-50 ng mL-1 Se in the injected extracts for the selenium-enriched samples and 2-10 ng mL-1 Se for the natural selenium level samples. LOQ values for HPLC-ESI-MS were ca. 100 times higher than those measured by HPLC-ICP-MS.

Speciation of selenoamino acids and organoselenium compounds in selenium-enriched yeast using high-performance liquid chromatography inductively coupled plasma mass spectrometry

As part of an ongoing study to identify selenium compounds with cancer chemopreventive activity, selenium-enriched yeast was analyzed by HPLC–ICP-MS. More than twenty selenium-containing species were found in hot water and enzymatic hydrolysis extracts of the yeast. Trifluoroacetic acid was used as an ion-pairing agent in a water–methanol mobile phase with reversed-phase chromatography on an octylsilane stationary phase. The presence of selenocystine, selenomethionine and methylselenocysteine was confirmed by comparative retention of standards. The column efficiency was 8500 theoretical plates and the mobile phase was compatible with standard ICP-MS operating conditions.

High-performance liquid chromatography of selenium compounds utilizing perfluorinated carboxylic acid ion-pairing agents and inductively coupled plasma and electrospray ionization mass spectrometric detection

Increasing speciation demands in clinical chemistry, toxicology and nutrition have made the determination of the total elements in a sample inadequate; the amount of an element and the chemical forms in which it is present need to be known. Inductively coupled plasma mass spectrometry (ICP-MS) was used after high-performance liquid chromatographic (HPLC) separation, as was electrospray ionization mass spectrometry (ESI-MS). The effect of variation of the number of carbon atoms in perfluorinated carboxylic acids used as ion-pairing agents for the separation of selenium compounds was examined. Trifluoroacetic acid (0.1%), pentafluoropropanoic acid (0.1%) or heptafluorobutanoic acid (0.1%; HFBA) were alternatively used as additives to methanol-water (1:99, v/v) solutions as mobile phases. Reversed-phase HPLC-ICP-MS with 0.1% HFBA in the mobile phase allowed more than 20 selenium compounds to be separated in 70 min in an isocratic elution mode; the separation of natural selenium-enriched sample extracts was examined and explained. The pH of the 0.1% HFBA solution was modified with hydrochloric acid or ammonia and the pH of the sample extracts before injection was modified in order to overcome unwanted double peak formation in the chromatograms of sample extracts. Oxidations of standard gamma-glutamyl-Se-methylselenocysteine and Se-methylselenocysteine were carried out using 30% H2O2 solution and identifications of selenium-containing oxidation products were made using HPLC-ICP-MS and HPLC-ESI-MS. The principal organic oxidation product in both cases was methaneseleninic acid (MeSeO2H).

High-performance liquid chromatography of selenoamino acids and organo selenium compounds - Speciation by inductively coupled plasma mass spectrometry

As part of an ongoing study to identify selenium compounds with cancer chemopreventive activity, extracts of selenium-enriched samples were analyzed by HPLC-inductively coupled plasma (ICP)-MS. Ion-exchange, ion pair and derivatization methods for reversed-phase HPLC were considered and advantages and disadvantages for each compared. Anion exchange allows separation of selenite and selenate, but otherwise provides poor separation. Pre-column derivatization and reversed-phase chromatography provides separation of compounds with terminal amine functionalities, but many other species elute in the void volume. The ion pair method gave optimal separation and was compatible with standard ICP-MS operating conditions.

Identification of the principal selenium compounds in selenium-enriched natural sample extracts by ion-pair liquid chromatography with inductively coupled plasma- and electrospray ionization-mass spectrometric detection

Selenium-enriched garlic and yeast sample extracts and digests were analyzed using ion-pair high performance liquid chromatography (HPLC) with on-line inductively coupled plasma-mass spectrometric (ICP-MS) and electrospray ionization-mass spectrometric (ESI-MS) detection. The principal selenium compounds in these samples were identified as selenomethionine, and Se-adenosyl-selenohomocysteine in yeast, and γ-glutamyl-Se-methyl-selenocysteine and possibly γ-glutamyl-selenomethionine in garlic. The compounds identified account for 85 and 90% of the total selenium content of the yeast and the garlic samples, respectively. On-line HPLC-ESI-MS selected ion chromatograms (SIC) and mass spectra of selenium compounds extracted from selenium enriched samples are presented. Limits of quantification (LOQ, defined as S/N = 10) for HPLC-ICP-MS were in the range 10–50 ng mL–1 Se in the injected extracts. LOQ values for HPLC-ESI-MS were ca. 100 times higher than those of HPLC-ICP-MS.

Performance evaluation of an axially viewed horizontal inductively coupled plasma for optical emission spectrometry

Abstract A performance evaluation of a horizontal axially viewed inductively coupled plasma (ICP) for optical emission spectrometry is presented. The main contribution of this work is the elucidation of the sources of analytical performance differences using practical diagnostics in the comparison of axial and conventional radial viewing of the ICP. Figures of merit such as detection limit, background equivalent concentration, precision, and dynamic range are compared for both viewing arrangements. The detection limit improvements with axial viewing, known from previous work in the literature, are shown to be understood in the context of the signal-to-background-ratio relative-standard-deviation-of-the-background (SBR-RSDB) theory. The usefulness of the SBR-RSDB approach as a diagnostic tool for understanding the detection limit improvement and identifying performance differences is demonstrated. This approach can be further utilized for quality control and quality assurance of instrument performance and detection limit results. Other characteristic differences between axial and radial viewing are presented including matrix effects on line signals and the magnitudes of spectral interferences from OH bands. An overall improvement factor of five in detection power was observed when using axial viewing compared with radial viewing.

Determination of inorganic mercury and total mercury in biological and environmental samples by flow injection-cold vapor-atomic absorption spectrometry using sodium borohydride as the sole reducing agent

Abstract A simple, fast, precise and accurate method to determine inorganic mercury and total mercury in biological and environmental samples was developed. The optimized flow-injection mercury system permitted the separate determination of inorganic mercury and total mercury using sodium borohydride as reducing agent. Inorganic mercury was selectively determined after reduction with 10−4% w/v sodium borohydride, while total mercury was determined after reduction with 0.75% w/v sodium borohydride. The calibration graphs were linear up to 30 ng ml−1. The detection limits of the method based on three times the standard deviation of the blank were 24 and 3.9 ng l−1 for total mercury and inorganic mercury determination, respectively. The relative standard deviation was less than 1.5% for a 10 ng ml−1 mercury standard. As a means of checking method performance, deionized water and pond water samples were spiked with methylmercury and inorganic mercury; quantitative recovery for total mercury and inorganic mercury was obtained. The accuracy of the method was verified by analyzing alkaline and acid extracts of five biological and sediment reference materials. Microwave-assisted extraction procedures resulted in higher concentrations of recovered mercury species, lower matrix interference with mercury determination and less time involved in sample treatment than conventional extraction procedures. The standard addition method was only needed for calibration when biological samples were analyzed. The detection limits were in the range of 1.2–19 and 6.6–18 ng g−1 in biological and sediment samples for inorganic mercury and total mercury determination, respectively.

Identification of selenium species in selenium-enriched garlic, onion and broccoli using high-performance ion chromatography with inductively coupled plasma mass spectrometry detection

Six standard selenium species including selenocystine, methyl selenocysteine, selenite, selenomethionine, allyl selenocysteine and selenate have been separated by high-performance ion chromatography on a Hamilton PRPX-100 column and detected by ICP-MS. Selenium enriched vegetables were analysed. Five selenium species and several unknown peaks were detected.

DETERMINATION OF METHYLMERCURY AND INORGANIC MERCURY IN WATER SAMPLES BY SLURRY SAMPLING COLD VAPOR ATOMIC ABSORPTION SPECTROMETRY IN A FLOW INJECTION SYSTEM AFTER PRECONCENTRATION ON SILICA C18 MODIFIED

A novel method for preconcentration of methylmercury and inorganic mercury from water samples was developed involving the determination of ngl(-1) levels of analytes retained on the silica C(18) solid sorbent, previous complexation with ammonium pyrrolidine dithiocarbamate (APDC), by slurry sampling cold vapor atomic absorption spectrometry (SS-CVAAS) in a flow injection (FI) system. Several variables were optimized affecting either the retention of both mercury species, such as APDC concentration, silica C(18) amount, agitation times, or their determination, including hydrochloric acid concentration in the suspension medium, peristaltic pump speed and argon flow-rate. A Plackett-Burman saturated factorial design permitted to differentiate the influential parameters on the preconcentration efficiency, which were after optimized by the sequential simplex method. The contact time between mercury containing solution and APDC, required to reach an efficient sorption, was decreased from 26 to 3min by the use of sonication stirring instead of magnetic stirring. The use of 1moldm(-3) hydrochloric acid suspension medium and 0.75% (m/v) sodium borohydride reducing agent permitted the selective determination of methylmercury. The combination of 5moldm(-3) hydrochloric acid and 10(-4)% (m/v) sodium borohydride was used for the selective determination of inorganic mercury. The detection limits achieved for methylmercury and inorganic mercury determination under optimum conditions were 0.96 and 0.25ngl(-1), respectively. The reliability of the proposed method for the determination of both mercury species in waters was checked by the analysis of samples spiked with known concentrations of methylmercury and inorganic mercury; quantitative recoveries were obtained.

Flow Injection Calibration Methods for Atomic Absorption Spectrometry

Abstract The use of an atomic absorption spectrometer as a detector in flow injection analysis is briefly reviewed. A new simplified model is described for the dispersion effects observed with such systems; the model is based on considering the dispersion to be due to a single hypothetical mixing chamber located immediately prior to the measurement stage. The utility of this approach is demonstrated for two methods of calibration commonly used in atomic absorption spectrometry, and it is shown that flow injection sample and standard handling techniques are comparable to manipulation with volumetric apparatus. The flow injection method has a number of advantages for the analogue of the standard addition method. The use of an exponential concentration gradient is proposed as a novel method of calibration using a single concentrated standard. Results are presented for the determination of chromium in standard steels.