Julie L. Herberg

Metal-organic frameworks as templates for nanoscale NaAlH4.

Metal-organic frameworks (MOFs) offer an attractive alternative to traditional hard and soft templates for nanocluster synthesis because their ordered crystalline lattice provides a highly controlled and inherently understandable environment. We demonstrate that MOFs are stable hosts for metal hydrides proposed for hydrogen storage and their reactive precursors, providing platform to test recent theoretical predictions that some of these materials can be destabilized with respect to hydrogen desorption by reducing their critical dimension to the nanoscale. With the MOF HKUST-1 as template, we show that NaAlH(4) nanoclusters as small as eight formula units can be synthesized. The confinement of these clusters within the MOF pores dramatically accelerates the desorption kinetics, causing decomposition to occur at approximately 100 degrees C lower than bulk NaAlH(4). However, using simultaneous thermogravimetric modulated beam mass spectrometry, we also show that the thermal decomposition mechanism of NaAlH(4) is complex and may involve processes such as nucleation and growth in addition to the normally assumed two-step chemical decomposition reactions.

Identification of endohedral water in single-walled carbon nanotubes by 1H NMR

Water confinement within single-walled carbon nanotubes (SWCNTs) has been a topic of current interest, due in part to their potential nanofiltration applications. Experiments have recently validated molecular dynamics predictions of flow enhancement within these channels, although few studies have probed the detailed structure and dynamics of water in these systems. Proton nuclear magnetic resonance ( (1)H NMR) is a technique capable of providing some of these details, although care must be exercised in separating the confined water of interest from exterior water. By using controlled experiments with both sealed and opened SWCNTs and by providing a quantitative measure of water content through desorption experiments, a signature for confined water in SWCNTs has been positively identified. This endohedral or interior water is characterized by a relatively broad feature located at 0.0 ppm, shifted upfield relative to bulk water. With the identification of a signature for water inside SWCNTs, further studies aimed at probing water dynamics will be enabled.

Electronic characterization of lithographically patterned microcoils for high sensitivity NMR detection.

Nuclear magnetic resonance (NMR) offers a non-destructive, powerful, structure-specific analytical method for the identification of chemical and biological systems. The use of radio frequency (RF) microcoils has been shown to increase the sensitivity in mass-limited samples. Recent advances in micro-receiver technology have further demonstrated a substantial increase in mass sensitivity [D.L. Olson, T.L. Peck, A.G. Webb, R.L. Magin, J.V. Sweedler, High-resolution microcoil H-1-NMR for mass-limited, nanoliter-volume samples, Science 270 (5244) (1995) 1967-1970]. Lithographic methods for producing solenoid microcoils possess a level of flexibility and reproducibility that exceeds previous production methods, such as hand winding microcoils. This paper presents electrical characterizations of RF microcoils produced by a unique laser lithography system that can pattern three dimensional surfaces and compares calculated and experimental results to those for wire wound RF microcoils. We show that existing optimization conditions for RF coil design still hold true for RF microcoils produced by lithography. Current lithographic microcoils show somewhat inferior performance to wire wound RF microcoils due to limitations in the existing electroplating technique. In principle, however, when the pitch of the RF microcoil is less than 100mum lithographic coils should show comparable performance to wire wound coils. In the cases of larger pitch, wire cross sections can be significantly larger and resistances lower than microfabricated conductors.

Portable Microcoil NMR Detection Coupled to Capillary Electrophoresis

High-efficiency separation techniques, such as capillary electrophoresis (CE), coupled to a nondestructive nuclear magnetic resonance (NMR) spectrometer offer the ability to separate, chemically identify, and provide structural information on analytes in small sample volumes. Previous CE-NMR coupled systems utilized laboratory-scale NMR magnets and spectrometers, which require very long separation capillaries. New technological developments in electronics have reduced the size of the NMR system, and small 1-2 T permanent magnets provide the possibilities of a truly portable NMR. The microcoils used in portable and laboratory-scale NMR may offer the advantage of improved mass sensitivity because the limit of detection (LOD) is proportional to the coil diameter. In this work, CE is coupled with a portable, briefcase-sized NMR system that incorporates a microcoil probe and a 1.8 T permanent magnet to measure (19)F NMR spectra. Separations of fluorinated molecules are demonstrated with stopped- and continuous-flow NMR detection. The results demonstrate that coupling CE to a portable NMR instrument is feasible and can provide a low-cost method to obtain structural information on microliter samples. An LOD of 31.8 nmol for perfluorotributylamine with a resolution of 4 ppm has been achieved with this system.

Magnetic resonance flow velocity and temperature mapping of a shape memory polymer foam device

BackgroundInterventional medical devices based on thermally responsive shape memory polymer (SMP) are under development to treat stroke victims. The goals of these catheter-delivered devices include re-establishing blood flow in occluded arteries and preventing aneurysm rupture. Because these devices alter the hemodynamics and dissipate thermal energy during the therapeutic procedure, a first step in the device development process is to investigate fluid velocity and temperature changes following device deployment.MethodsA laser-heated SMP foam device was deployed in a simplified in vitro vascular model. Magnetic resonance imaging (MRI) techniques were used to assess the fluid dynamics and thermal changes associated with device deployment.ResultsSpatial maps of the steady-state fluid velocity and temperature change inside and outside the laser-heated SMP foam device were acquired.ConclusionsThough non-physiological conditions were used in this initial study, the utility of MRI in the development of a thermally-activated SMP foam device has been demonstrated.

Solid State NMR Measurements for Preliminary Lifetime Assessments in λ-Irradiated and Thermally Aged Siloxane Elastomers

Siloxanes have a wide variety of applications throughout the aerospace industry which take advantage of their exceptional insulating and adhesive properties and general resilience. They also offer a wide range of tailorable engineering properties with changes in composition and filler content. They are, however, subject to degradation in radiatively and thermally harsh environments. We are using solid state nuclear magnetic resonance techniques to investigate changes in network and interfacial structure in siloxane elastomers and their correlations to changes in engineering performance in a series of degraded materials. NMR parameters such as transverse ( T{sub 2}) relaxation times, cross relaxation rates, and residual dipolar coupling constants provide excellent probes of changes crosslink density and motional dynamics of the polymers caused by multi-mechanism degradation. The results of NMR studies on aged siloxanes are being used in conjunction with other mechanical tests to provide insight into component failure and degradation kinetics necessary for preliminary lifetime assessments of these materials as well as into the structure-property relationships of the polymers. NMR and MRI results obtained both from high resolution NMR spectrometers as well as low resolution benchtop NMR screening tools will be presented.

Hydrogen storage in sodium aluminum hydride.

Sodium aluminum hydride, NaAlH{sub 4}, has been studied for use as a hydrogen storage material. The effect of Ti, as a few mol. % dopant in the system to increase kinetics of hydrogen sorption, is studied with respect to changes in lattice structure of the crystal. No Ti substitution is found in the crystal lattice. Electronic structure calculations indicate that the NaAlH{sub 4} and Na{sub 3}AlH{sub 6} structures are complex-ionic hydrides with Na{sup +} cations and AlH{sub 4}{sup -} and AlH{sub 6}{sup 3-} anions, respectively. Compound formation studies indicate the primary Ti-compound formed when doping the material at 33 at. % is TiAl{sub 3} , and likely Ti-Al compounds at lower doping rates. A general study of sorption kinetics of NaAlH{sub 4}, when doped with a variety of Ti-halide compounds, indicates a uniform response with the kinetics similar for all dopants. NMR multiple quantum studies of solution-doped samples indicate solvent interaction with the doped alanate. Raman spectroscopy was used to study the lattice dynamics of NaAlH{sub 4}, and illustrated the molecular ionic nature of the lattice as a separation of vibrational modes between the AlH{sub 4}{sup -} anion-modes and lattice-modes. In-situ Raman measurements indicate a stable AlH{sub 4}{sup -} anion that is stable at the melting temperature of NaAlH{sub 4}, indicating that Ti-dopants must affect the Al-H bond strength.