Julien Schmitt

Formation of Superlattices of Gold Nanoparticles Using Ostwald Ripening in Emulsions: Transition from fcc to bcc Structure

An efficient method to form 3D superlattices of gold nanoparticles inside oil emulsion droplets is presented. We demonstrate that this method relies on Ostwald ripening, a well-known phenomenon occurring during the aging of emulsions. The key point is that the nanoparticle concentration inside the smaller droplets is increasing very slowly with time, thus inducing the crystallization of the nanoparticles into superlattices. Using oil-in-water emulsions doped with hydrophobic gold nanoparticles, we demonstrate that this method is efficient for different types of oils (toluene, cyclohexane, dodecane, and hexadecane). 3D superlattices of the nanoparticles are obtained, with dimensions reaching a hundred nanometers. The kinetics of the crystallization depends on the solubility of the oil in water but also on the initial concentration of the gold nanoparticles in oil. This method also provides an innovative way to obtain the complete phase diagram of nanoparticle suspensions with concentration. Indeed, during this slow crystallization process, a transition from a disordered suspension to a fcc structure is observed, followed by a transition toward a bcc structure. This evolution with time provides key results to understand the role played by the ligands located at the surface of the nanoparticles in order to control the type of superlattices which are formed.

Formation of nanostructured silica materials templated with nonionic fluorinated surfactant followed by in situ SAXS.

The formation of two-dimensional (2D)-hexagonal (p6m) silica-based hybrid materials from concentrated micellar solutions (10 wt %) of two nonionic fluorinated surfactants, R(7)(F)(EO)(8) and R(8)(F)(EO)(9), is investigated in situ using synchrotron time-resolved small angle X-ray scattering (SAXS). The two surfactants form direct micelles with different structures prior to the silica precursor addition as demonstrated by SAXS and SANS. R(8)(F)(EO)(9) gives spherical micelles and R(7)(F)(EO)(8) more complex ones, modeled here as short wormlike micelles. The in situ SAXS experiments reveal that both surfactants form well-ordered 2D-hexagonal hybrid materials after the addition of the silica precursor, in coexistence with an excess of surfactant micelles. The structures of both 2D-hexagonal phases are compared just after precipitation, and it is found that more robust and larger silica walls are formed for R(8)(F)(EO)(9) than for R(7)(F)(EO)(8). This could explain why only the material obtained with R(8)(F)(EO)(9) is stable upon washing, as observed previously. Moreover, it is proposed that in both cases, only a part of the micelles interact with the silica oligomers and undergo structural modifications before forming the 2D-hexagonal mesophase. The obtained results are finally discussed in the more general framework of the templating mechanism for nonionic surfactants.

Morphologies of mesoporous SBA-15 particles explained by the competition between interfacial and bending energies

The morphology control of the (sub)micrometer particles of mesoporous silica materials can be crucial in many applications. For particles of the SBA-15 material, the morphology happens to be easily tuned by simply changing the synthesis temperature, and well defined shapes are obtained, ranging from hexagonal columns, rice grains and rods to nano-donuts. Here we show that all these shapes can be explained using a very simple energetic model, based on the idea that the final shape of the particles is at thermodynamic equilibrium. This model contains two terms, the interfacial energies (surface tensions γ1 and γ2) on one hand, and the bending energy (bending constant K3) on the other hand. The two ratios γ2/γ1 and K3/γ1 are determined from the average dimensions (diameter, length, radius of curvature) measured by SEM and TEM for rod-like and torus-like particles and the evolution of the particles morphology with temperature can be simply explained based on the values of these two ratios. This approach could be easily extended to other soft matter systems where the formation of particles is governed by both surface tensions anisotropy and bending.

Outset of the Morphology of Nanostructured Silica Particles during Nucleation Followed by Ultrasmall-Angle X-ray Scattering

Nucleation and growth of SBA-15 silica nanostructured particles with well-defined morphologies has been followed with time by small-angle X-ray scattering (SAXS) and ultrasmall-angle X-ray scattering (USAXS), using synchrotron radiation. Three different morphologies have been compared: platelets, toroids, and rods. SEM observations of the particles confirm that two key physical parameters control the morphology: the temperature and the stirring of the solution. USAXS curves demonstrate that primary particles with a defined shape are present very early in the reaction mixture, immediately after a very fast nucleation step. This nucleation step is detected at 10 min (56 °C) or 15 min (50 °C) after the addition of the silica precursor. The main finding is that the USAXS signal is different for each type of morphology, and we demonstrate that the difference is related to the shape of the particles, showing characteristic form factors for the different morphologies (platelet, toroid, and rod). Moreover, the size of the mesocrystal domains is correlated directly with the particle dimensions and shape. When stirred, aggregation between primary particles is detected even after 12 min (56 °C). The platelet morphology is promoted by constant stirring of the solution, through an oriented aggregation step between primary particles. In contrast, toroids and rods are only stabilized under static conditions. However, for toroids, aggregation is detected almost immediately after nucleation.

Understanding heat driven gelation of anionic cellulose nanofibrils: Combining saturation transfer difference (STD) NMR, small angle X-ray scattering (SAXS) and rheology

A novel mechanism of heat-triggered gelation for oxidised cellulose nanofibrils (OCNF) is reported. We demonstrate that a synergistic approach combining rheology, small-angle X-ray scattering (SAXS) and saturation transfer difference NMR (STD NMR) experiments enables a detailed characterisation of gelation at different length scales. OCNF dispersions experience an increase in solid-like behaviour upon heating as evidenced by rheological studies, associated with enhanced interfibrillar interactions measured using SAXS. Interactions result in an increased fibrillar overlap and increased population of confined water molecules monitored by STD NMR. In comparison, cationic cellulose nanofibrils (produced by reaction of cellulose with trimethylglycidylammonium chloride) were found to be heat-unresponsive.

Alcohol induced gelation of TEMPO-oxidized cellulose nanofibril dispersions

Solvent-induced physical hydrogels of TEMPO-oxidized cellulose nanofibrils (OCNFs) were obtained from aqueous/alcoholic dispersions of fibrils in lower alcohols, namely, methanol, ethanol, 1-propanol and 2-propanol. The sol-gel transition occurs above a critical alcohol concentration of ca. 30 wt% for all alcohols tested. The rheological properties of the hydrogels depend on the nature of the alcohol: for ethanol, 1-propanol and 2-propanol the magnitude of the shear storage modulus follows the alcohol hydrophilicity, whilst methanol produces the weakest gels in the group. Above a second critical concentration, ca. 60 wt% alcohol, phase separation is observed as the gels undergo syneresis. Analysis of small-angle X-ray scattering data shows that the OCNFs may be modelled as rigid rods. In the presence of lower alcohols, attractive interactions between nanofibrils are present and, above the alcohol concentration leading to gelation, an increase of the OCNF cross-section is observed, suggesting alcohol induced aggregation of nanofibrils.

In Situ Small‐Angle X‐ray Scattering Investigation of the Formation of Dual‐Mesoporous Materials

The formation of a 2D-hexagonal (p6m) silica-based hybrid dual-mesoporous material is investigated in situ by using synchrotron time-resolved small-angle X-ray scattering (SAXS). The material is synthesized from a mixed micellar solution of a nonionic fluorinated surfactant, R(F) 8 (EO)9 (EO=ethylene oxide) and a nonionic triblock copolymer, P123. Both mesoporous networks, with pore dimensions of 3.3 and 8.5 nm respectively, are observed by nitrogen sorption, transmission electron microscopy (TEM), and SAXS. The in situ SAXS experiments reveal that mesophase formation occurs in two steps. First the nucleation and growth of a primary 2D-hexagonal network (N1), associated with mixed micelles containing P123, then subsequent formation of a second network (N2), associated with micelles of pure R(F) 8 (EO)9 . The data obtained from SAXS and TEM suggest that the N1 network is used as a nucleation center for the formation of the N2 network, which would result in the formation of a grain with two mesopore sizes. Understanding the mechanism of the formation of such materials is an important step towards the synthesis of more-complex materials by fine tuning the porosity.