Jun Namiki

An Ultrahigh-Speed, High-Sensitivity, Portable CCD Color Camera

The authors have been developing ultrahigh-speed, high-sensitivity broadcast cameras that are capable of capturing clear, smooth, slow-motion video even in conditions with limited lighting, such as at professional baseball games played at night. In 2003, the first broadcast color camera using three 80,000-pixel ultrahigh-speed, high-sensitivity charge-coupled devices (CCDs) was developed. This camera is capable of ultrahigh-speed video recording at up to 1,000,000 frames/sec, with about ten times the sensitivity of standard high-speed cameras. It has enabled an entirely new style of presentation for sports broadcasts and science programs. The authors continue research to improve the cameras resolution. This paper discusses the development of the first ever ultrahigh-speed high-sensitivity CCD with 300,000 pixels—a four-fold increase over the previous version, as well as the development of a single-chip portable color camera mounted with this CCD.

Color video camera capable of 1,000,000 fps with triple ultrahigh-speed image sensors

We developed an ultrahigh-speed, high-sensitivity, color camera that captures moving images of phenomena too fast to be perceived by the human eye. The camera operates well even under restricted lighting conditions. It incorporates a special CCD device that is capable of ultrahigh-speed shots while retaining its high sensitivity. Its ultrahigh-speed shooting capability is made possible by directly connecting CCD storages, which record video images, to photodiodes of individual pixels. Its large photodiode area together with the low-noise characteristic of the CCD contributes to its high sensitivity. The camera can clearly capture events even under poor light conditions, such as during a baseball game at night. Our camera can record the very moment the bat hits the ball.

An ultrahigh-speed color video camera operating at 1,000,000 fps with 288 frame memories

We developed an ultrahigh-speed color video camera that operates at 1,000,000 fps (frames per second) and had capacity to store 288 frame memories. In 2005, we developed an ultrahigh-speed, high-sensitivity portable color camera with a 300,000-pixel single CCD (ISIS-V4: In-situ Storage Image Sensor, Version 4). Its ultrahigh-speed shooting capability of 1,000,000 fps was made possible by directly connecting CCD storages, which record video images, to the photodiodes of individual pixels. The number of consecutive frames was 144. However, longer capture times were demanded when the camera was used during imaging experiments and for some television programs. To increase ultrahigh-speed capture times, we used a beam splitter and two ultrahigh-speed 300,000-pixel CCDs. The beam splitter was placed behind the pick up lens. One CCD was located at each of the two outputs of the beam splitter. The CCD driving unit was developed to separately drive two CCDs, and the recording period of the two CCDs was sequentially switched. This increased the recording capacity to 288 images, an increase of a factor of two over that of conventional ultrahigh-speed camera. A problem with the camera was that the incident light on each CCD was reduced by a factor of two by using the beam splitter. To improve the light sensitivity, we developed a microlens array for use with the ultrahigh-speed CCDs. We simulated the operation of the microlens array in order to optimize its shape and then fabricated it using stamping technology. Using this microlens increased the light sensitivity of the CCDs by an approximate factor of two. By using a beam splitter in conjunction with the microlens array, it was possible to make an ultrahigh-speed color video camera that has 288 frame memories but without decreasing the cameras light sensitivity.

Development of a driving method suitable for ultrahigh-speed shooting in a 2M-fps 300k-pixel single-chip color camera

We have developed an ultrahigh-speed CCD camera that can capture instantaneous phenomena not visible to the human eye and impossible to capture with a regular video camera. The ultrahigh-speed CCD was specially constructed so that the CCD memory between the photodiode and the vertical transfer path of each pixel can store 144 frames each. For every one-frame shot, the electric charges generated from the photodiodes are transferred in one step to the memory of all the parallel pixels, making ultrahigh-speed shooting possible. Earlier, we experimentally manufactured a 1M-fps ultrahigh-speed camera and tested it for broadcasting applications. Through those tests, we learned that there are cases that require shooting speeds (frame rate) of more than 1M fps; hence we aimed to develop a new ultrahigh-speed camera that will enable much faster shooting speeds than what is currently possible. Since shooting at speeds of more than 200,000 fps results in decreased image quality and abrupt heating of the image sensor and drive circuit board, faster speeds cannot be achieved merely by increasing the drive frequency. We therefore had to improve the image sensor wiring layout and the driving method to develop a new 2M-fps, 300k-pixel ultrahigh-speed single-chip color camera for broadcasting purposes.