Junepyo Oh

Self-organization of S adatoms on Au(111): √3R30° rows at low coverage

Using scanning tunneling microscopy, we observe an adlayer structure that is dominated by short rows of S atoms, on unreconstructed regions of a Au(111) surface. This structure forms upon adsorption of low S coverage (less than 0.1 monolayer) on a fully reconstructed clean surface at 300 K, then cooling to 5 K for observation. The rows adopt one of three orientations that are rotated by 30° from the close-packed directions of the Au(111) substrate, and adjacent S atoms in the rows are separated by √3 times the surface lattice constant, a. Monte Carlo simulations are performed on lattice-gas models, derived using a limited cluster expansion based on density functional theory energetics. Models which include long-range pairwise interactions (extending to 5a), plus selected trio interactions, successfully reproduce the linear rows of S atoms at reasonable temperatures.

He/Ar-atom scattering from molecular monolayers: C60/Pt(111) and graphene/Pt(111)

Supersonic He and Ar atomic beam scattering from C(60) and graphene monolayers adsorbed on a Pt(111) surface are demonstrated in order to obtain detailed insight into a gas-molecule collision that has not been studied in detail so far. The effective masses and phonon spectral densities of the monolayers seen by different projectiles are discussed based on classical models such as the hard cube model and the recently developed smooth surface model. Large effective masses are deduced for both the monolayers, suggesting collective effects of surface atoms in the single collision event. The effective Debye temperature of graphene was found to be similar to that reported in highly oriented pyrolytic graphite (HOPG), indicating that the graphene is decoupled well from the Pt substrate. A much smaller Debye-Waller factor was found for the C(60) layer, probably reflecting the strong C(60)-Pt(111) interaction.

Reconstruction of steps on the Cu(111) surface induced by sulfur

A rich menagerie of structures is identified at 5 K following adsorption of low coverages (≤0.05 monolayers) of S on Cu(111) at room temperature. This paper emphasizes the reconstructions at the steps. The A-type close-packed step has 1 row of S atoms along its lower edge, where S atoms occupy alternating pseudo-fourfold-hollow (p4fh) sites. Additionally, there are 2 rows of S atoms of equal density on the upper edge, bridging a row of extra Cu atoms, together creating an extended chain. The B-type close-packed step exhibits an even more complex reconstruction, in which triangle-shaped groups of Cu atoms shift out of their original sites and form a base for S adsorption at (mostly) 4fh sites. We propose a mechanism by which these triangles could generate Cu-S complexes and short chains like those observed on the terraces.

Functionalization of Graphene Grown on Metal Substrate with Atomic Oxygen: Enolate vs Epoxide

Graphene functionalization is of great importance in applying graphene as a component in functional devices or in activating it for use as a catalyst. Here we reveal that atomic oxidation of epitaxial graphene grown on a metal substrate results in the formation of enolate, i.e., adsorption of atomic oxygen at the on-top position, on the basal plane of a graphene, using periodic density functional theory calculations. This is striking because the enolate corresponds to the transition state between the epoxides on free-standing graphene and on graphite. Improved interfacial interaction between graphene and the metal substrate during atomic oxidation makes the graphene enolate a local minimum and further highly stabilizes it over the graphene epoxide. Our results provide not only a novel perspective for a chemical route to functionalizing graphene but also a new opportunity to utilize graphene enolate for graphene-based applications.

He and Ar beam scatterings from bare and defect induced graphite surfaces

The effect of the local electronic modification of the graphite surface on the gas-graphite interaction has been investigated by the molecular beam scattering technique. The angular intensity distributions of He and Ar beams scattered from pristine and defect induced graphite surfaces have been measured at various surface temperatures. From the He scattering results, the cross-section for the He diffuse scattering per defect is estimated as being as much as 113 nm(2). The origin of the extremely large cross-section is ascribed to the modulated electronic states of graphite around the defect based on the STM measurements, which is due to the local breaking of the π conjugated system of graphite. From the Ar scattering results, the effective mass of the graphite surface for the Ar collision has been estimated as M = 114 u, based on the analysis with the hard cube model. The new component appears in the scattering distribution of Ar for the defect induced graphite surface. The component has a larger peak position angle than that for the pristine graphite surface, indicating that the normal component of the translational energy of the Ar atom was greatly lost by the collision at the electronically modified area of graphite.

Lateral Hopping of CO on Ag(110) by Multiple Overtone Excitation.

A novel type of action spectrum representing multiple overtone excitations of the v(M-C) mode was observed for lateral hopping of a CO molecule on Ag(110) induced by inelastically tunneled electrons from the tip of a scanning tunneling microscope. The yield of CO hopping shows sharp increases at 261±4  mV, corresponding to the C-O internal stretching mode, and at 61±2, 90±2, and 148±7  mV, even in the absence of corresponding fundamental vibrational modes. The mechanism of lateral CO hopping on Ag(110) was explained by the multistep excitation of overtone modes of v(M-C) based on the numerical fitting of the action spectra, the nonlinear dependence of the hopping rate on the tunneling current, and the hopping barrier obtained from thermal diffusion experiments.

Atomic-Scale Dynamics of Surface-Catalyzed Hydrogenation/Dehydrogenation: NH on Pt(111)

Low-temperature scanning tunneling microscopy (LT-STM) was used to move hydrogen atoms and dissociate NH molecules on a Pt(111) surface covered with an ordered array of nitrogen atoms in a (2 × 2) structure. The N-covered Pt(111) surface was prepared by ammonia oxydehydrogenation, which was achieved by annealing an ammonia-oxygen overlayer to 400 K. Exposing the N-covered surface to H2(g) forms H atoms and NH molecules. The NH molecules occupy face-centered cubic hollow sites, while the H atoms occupy atop sites. The STM tip was used to dissociate NH and to induce hopping of H atoms. Action spectra consisting of the reaction yield versus applied bias voltage were recorded for both processes, which revealed that they are vibrationally mediated. The threshold voltages for NH dissociation and H hopping were found to be 430 and 272 meV, corresponding to the excitation energy of the N-H stretching and the Pt-H stretching modes, respectively. Substituting H with D results in an isotopic shift of -110 and -84 meV for the threshold voltages for ND dissociation and D hopping, respectively. This further supports the conclusion that these processes are vibrationally mediated.

Scattering of O2 from a graphite surface

Recently an extensive series of measurements has been presented for the angular distributions of oxygen molecules scattered from a graphite surface. Incident translational energies ranged from 291 to 614 meV with surface temperatures from 150 to 500 K. The measurements were taken with a fixed angle of 90° between the source beam and the detector and the angular distributions consisted of a single broad peak with the most probable intensity located at an angle slightly larger than the 45° specular position. Analysis with the hard cubes model for atom-surface scattering indicated that the scattering is primarily a single collision event with a surface having a collective effective mass much larger than a single carbon atom. Limited analysis with a classical diatomic molecular scattering theory was also presented. In this paper a more complete analysis using the classical diatomic molecular scattering theory is presented. The energy and temperature dependence of the observed angular distributions are well described as single collision events with a surface having an effective mass of 1.8 carbon graphite rings. In agreement with the earlier analysis and with other experiments, this suggests a large cooperative response of the carbon atoms in the outermost graphene layer.

Angular Intensity Distribution of a Molecular Oxygen Beam Scattered from a Graphite Surface

The scattering of the oxygen molecule from a graphite surface has been studied using a molecular beam scattering technique. The angular intensity distributions of scattered oxygen molecules were measured at incident energies from 291 to 614 meV with surface temperatures from 150 to 500 K. Every observed distribution has a single peak at a larger final angle than the specular angle of 45° which indicates that the normal component of the translation energy of the oxygen molecule is lost by the collision with the graphite surface. The amount of the energy loss by the collision has been roughly estimated as about 30-41% based on the assumption of the tangential momentum conservation during the collision. The distributions have also been analyzed with two theoretical models, the hard cubes model and the smooth surface model. These results indicate that the scattering is dominated by a single collision event of the particle with a flat surface having a large effective mass. The derived effective mass of the graphite surface for the incoming oxygen is 9-12 times heavier than that of a single carbon atom, suggesting a large cooperative motion of the carbon atoms in the topmost graphene layer.

Elucidation of Isomerization Pathways of a Single Azobenzene Derivative Using an STM

The predominant pathway for the isomerization between cis- and trans-azobenzenes-either (i) inversion by the bending of an NNC bond or (ii) rotation by the torsion of two phenyl rings-continues to be a controversial topic. To elucidate each isomerization pathway, a strategically designed and synthesized azobenzene derivative was investigated on a Ag(111) surface. This was achieved by exciting the molecule with tunneling electrons from the tip of a scanning tunneling microscope (STM). Structural analyses of the molecularly resolved STM images reveal that both inversion and rotation pathways are available for isomerization on a metal surface and strongly depend on the initial adsorption structures of the molecule. On the basis of the potential energy diagrams for the isomerization, it is concluded that isomerization pathways on a metal surface are not simply related to the excited states.