Jung-Chih Chiao

A 100-element HBT grid amplifier

A 100-element 10-GHz grid amplifier has been developed. The active devices in the grid are chips with heterojunction-bipolar-transistor (HBT) differential pairs. The metal grid pattern was empirically designed to provide effective coupling between the HBTs and free space. Two independent measurements, one with focusing lenses and the other without, were used to characterize the grid. In each case, the peak gain was 10 dB at 10 GHz with a 3-dB bandwidth of 1 GHz. The input and output return losses were better than 15 dB at 10 GHz. The maximum output power was 450 mW, and the minimum noise figure was 7 dB. By varying the bias, a signal could be amplitude modulated with a modulation index as large as 0.65. Tests show that the grid was quite tolerant of failures-the output power dropped by only 1 dB when 10% of the inputs were detuned. The grid amplifier is a multimode device that amplifies beams of different shapes and angles. Beams with incidence angles up to 30 degrees were amplified with less than a 3-dB drop in gain. >

An electronically switchable leaky wave antenna

We report an electronically switchable dielectric leaky wave antenna. The main beam angle can be electronically steered using p-i-n diodes. The diodes are used as switches to control the radiation from two sets of gratings with different periods, thereby switching the main beam angle. Beam steering is achieved at a single fixed frequency; no frequency sweeping is necessary. A microwave prototype demonstrates a 35/spl deg/ change in beam direction at 3.5 GHz. Measured antenna patterns agree with theoretical predictions. This approach should be scalable to millimeter-wave frequencies using diodes monolithically integrated on a semiconductor waveguide.

MEMS reconfigurable Vee antenna

A new architecture for microelectromechanical system (MEMS) reconfigurable Vee-antennas was presented. The planar antenna structure can be dynamically reconfigured to steer the radiation beam or change the shape of the beam using electrically-controlled microactuators. The theoretical and experimental beam patterns were investigated for a 17.5-GHz MEMS Vee-antenna. The beam steering and shaping capabilities were also demonstrated.

Synthesis and characterization of a biodegradable elastomer featuring a dual crosslinking mechanism

The need for advanced materials in emerging technologies such as tissue engineering has prompted increased research to produce novel biodegradable polymers elastic in nature and mechanically compliant with the host tissue. We have developed a soft biodegradable elastomeric platform biomaterial created from citric acid, maleic anhydride, and 1,8-octanediol, poly(octamethylene maleate (anhydride) citrate) (POMaC), which is able to closely mimic the mechanical properties of a wide range of soft biological tissues. POMaC features a dual crosslinking mechanism, which allows for the option of the crosslinking POMaC using UV irradiation and/or polycondensation to fit the needs of the intended application. The material properties, degradation profiles, and functionalities of POMaC thermoset networks can all be tuned through the monomer ratios and the dual crosslinking mechanism. POMaC polymers displayed an initial modulus between 0.03 and 1.54 MPa, and elongation at break between 48% and 534% strain. In vitro and in vivo evaluation using cell culture and subcutaneous implantation, respectively, confirmed cell and tissue biocompatibility. POMaC biodegradable polymers can also be combined with MEMS technology to fabricate soft and elastic 3D microchanneled scaffolds for tissue engineering applications. The introduction of POMaC will expand the choices of available biodegradable polymeric elastomers. The dual crosslinking mechanism for biodegradable elastomer design should contribute to biomaterials science.

Exploiting a patch antenna for strain measurements

The feasibility of applying patch antennas for strain measurement is investigated. The resonance frequency of a patch antenna is determined by the size of its metallic patch. An applied strain changes the dimensions of the metallic patch, resulting in a shift in the antenna resonant frequency. Therefore, the applied strains can be measured from the changes in antenna resonant frequency. A dual-frequency patch antenna was designed and fabricated using conventional photolithography techniques. The application of the patch antenna for strain measurement was evaluated by bonding the patch antenna to an aluminum cantilever beam and applying loads at the free end of the cantilever beam. The shifts of the return loss S11 curves under loads were correlated to the strains experienced by the patch antenna. The strain sensitivity of the antenna obtained from experimental measurements agreed well with the analytical prediction.

Field Distribution Models of Spiral Coil for Misalignment Analysis in Wireless Power Transfer Systems

This paper presents design and optimization methods for spiral coils utilized for wireless power transfer in wireless medical implant applications. A theoretical model was examined for near-field distributions of spiral-type transmitter antennas in both orthogonal components. Finite-element simulations were performed to verify the theoretical radiation patterns. Receiver antenna voltages were measured at planes of interest as a means to map field distributions. Theoretical, simulation, and experimental results were conducted in free space and they agreed well. Understanding the orthogonal field components and their distributions in various distances between the worn transmitter coil outside the body and the receiver coil of implant that has a much smaller size provides a means to find the optimal location and angle to harvest maximum energy. The analysis method for near-field wireless power transmission can be utilized to determine design strategies of the transmitter spiral coil with considerations also in the amplifier circuit and physical constraints in practical scenarios to obtain maximum power and link efficiency for the implant devices. The method can be extended to investigate field distributions affected by human tissues, which construct a much more complex environment, and will be conducted in future works.

An Integrated μLED Optrode for Optogenetic Stimulation and Electrical Recording

In this letter, we developed an integrated neural probe prototype for optogenetic stimulation by microscale light-emitting diode (μLED) and simultaneous recording of neural activities with microelectrodes on a single-polyimide platform. Optogenetics stimulates in vivo neural circuits with high-cellular specificity achieved by genetic targeting and precise temporal resolution by interaction of light-gated ion channels with optical beam. In our newly developed optrode probe, during optogenetic stimulation of neurons, continuous sensing of neuronal activities in vicinity of the activation site can provide feedback to stimulation or examine local responses in signal pathways. In the device, focusing the light from the μLED was achieved with an integrated photo-polymerized lens. The efficacy of the optrode for cortical stimulation and recording was tested on mice visual cortex neurons expressing channelrhodopsin-2. Stimulation intensity and frequency-dependent spiking activities of visual cortex were recorded. Our device has shown advantages over fiber-coupled laser-based optrode in terms of closed-loop integration, single-implant compactness and lower electrical power requirements, which would be clinically applicable for future prosthetic applications in personalized medicine.

An Implantable, Batteryless, and Wireless Capsule With Integrated Impedance and pH Sensors for Gastroesophageal Reflux Monitoring

In this study, a device for gastroesophageal reflux disease (GERD) monitoring has been prototyped. The system consists of an implantable, batteryless and wireless transponder with integrated impedance and pH sensors; and a wearable, external reader that wirelessly powers up the transponder and interprets the transponded radio-frequency signals. The transponder implant with the total size of 0.4 cm ×0.8 cm ×3.8 cm harvests radio frequency energy to operate dual-sensor and load-modulation circuitry. The external reader can store the data in a memory card and/or send it to a base station wirelessly, which is optional in the case of multiple-patient monitoring in a hospital or conducting large-scale freely behaving animal experiments. Tests were carried out to verify the signal transduction reliability in different situations for antenna locations and orientation. In vitro, experiments were conducted in a mannequin model by positioning the sensor capsule inside the wall of a tube mimicking the esophagus. Different liquids with known pH values were flushed through the tube creating reflux episodes and wireless signals were recorded. Live pigs under anesthesia were used for the animal models with the transponder implant attached on the esophageal wall. The reflux episodes were created while the sensor data were recorded wirelessly. The data were compared with those recorded independently by a clinically used wireless pH sensor capsule placed next to our implant transponder. The results showed that our transponder detected every episode in both acid and non-acid nature, while the commercial pH sensor missed events that had similar, repeated pH values, and failed to detect pH values higher than 10. Our batteryless transponder does not require a battery thus allowing longer diagnosis and prognosis periods to monitor drug efficacy, as well as providing accurate assessment of GERD symptoms.

A combined wireless neural stimulating and recording system for study of pain processing

Clinical studies have shown that spinal or cortical neurostimulation could significantly improve pain relief. The currently available stimulators, however, are used only to generate specific electrical signals without the knowledge of physiologically responses caused from the stimulation. We thus propose a new system that can adaptively generate the optimized stimulating signals base on the correlated neuron activities. This new method could significantly improve the efficiency of neurostimulation for pain relief. We have developed an integrated wireless recording and stimulating system to transmit the neuronal signals and to activate the stimulator over the wireless link. A wearable prototype has been developed consisting of amplifiers, wireless modules and a microcontroller remotely controlled by a Labview program in a computer to generate desired stimulating pulses. The components were assembled on a board with a size of 2.5 cm x 5 cm to be carried by a rat. To validate our system, lumbar spinal cord dorsal horn neuron activities of anesthetized rats have been recorded in responses to various types of peripheral graded mechanical stimuli. The stimulation at the periaqueductal gray and anterior cingulate cortex with different combinations of electrical parameters showed a comparable inhibition of spinal cord dorsal horns activities in response to the mechanical stimuli. The Labview program was also used to monitor the neuronal activities and automatically activate the stimulator with designated pulses. Our wireless system has provided an opportunity for further study of pain processing with closed-loop stimulation paradigm in a potential new pain relief method.

A beam-steerer using reconfigurable PBG ground plane

Phased arrays with reduced cost and increased power handling capability are important for commercial applications. In this paper, we demonstrate beam-steering arrays using reconfigurable periodic structures in the ground plane without solid-state phase shifters. A linearly discrete beam-steering of 35/spl deg/ in steps of approximately 6/spl deg/ has been achieved at a fixed frequency of 5.6 GHz. The main beam power varied less than 2 dB over the whole range of beam-steering. A frequency-dependent beam-steering of 15/spl deg/ is also achieved from 5 GHz to 6 GHz.