Junguo Zhao

Direct electron transfer at horseradish peroxidase—colloidal gold modified electrodes

Abstract The reduction of H2O2 on horseradish peroxidase (HRP) and horseradish peroxidase—gold sol (HRP-Au) modified electrodes has been studied with and without an electron transfer mediator. The amplification effect owing to the enzyme-catalyzed turnover of substrate facilitates our observation that HRP immobilized on colloidal gold and then deposited on a flat electrode surface can be reduced at a convenient rate at 0 V (Ag/AgCl) without an electron transfer mediator. Possible mechanisms and potential applications are discussed.

A xanthine oxidase/colloidal gold enzyme electrode for amperometric biosensor applications

An electrode has been prepared based on xanthine oxidase adsorbed to colloidal gold and evaporated onto the surface of glassy carbon. This electrode responds to xanthine or hypoxanthine in the absence of added mediator by electrochemical oxidation of the enzymatic oxidation product, uric acid, at the electrode surface. The electrode can also be used in the presence of an electron transfer mediator to detect other substrates for xanthine oxidase such as 4-hydroxypyrimidine.

A carrageenan hydrogel stabilized colloidal gold multi-enzyme biosensor electrode utilizing immobilized horseradish peroxidase and cholesterol oxidase/cholesterol esterase to detect cholesterol in serum and whole blood

The preparation of two immobilized enzyme electrodes is described. One electrode contains horseradish peroxidase absorbed to colloidal gold and deposited on a glassy carbon electrode along with cholesterol oxidase entrapped in a carrageenan hydrogel. The second electrode also includes cholesterol esterase entrapped in the carrageenan. The incorporation of ferrocene or ferrocenecarboxylic acid mediator is brought about by either evaporation on the glassy carbon electrode or, in the latter case, entrapment in the carrageenan hydrogel. Amperometric signal generation results from the HRP catalyzed turnover of H2O2, a secondary product of the cholesterol oxidase catalyzed oxidation of cholesterol. Use of these enzyme electrodes makes cholesterol detection possible in human serum, low density lipoprotein, and whole blood.

Comparison of colloidal gold electrode fabrication methods: the preparation of a horseradish peroxidase enzyme electrode

In order to prepare biosensing electrodes which respond to hydrogen peroxide, horseradish peroxidase has been adsorbed to colloidal gold sols and electrodes prepared by deposition of these enzyme-gold sols onto glassy carbon using three methods: evaporation, electrodeposition and electrolyte deposition. In the latter method the enzyme-gold sol is applied to the surface of a glassy carbon disk electrode followed by an equal volume of 2 mM CaCl2. The electrolyte causes the sol to precipitate on the electrode surface, producing an immobilized enzyme electrode. Satisfactory electrodes which gave an electrochemical response to hydrogen peroxide in the presence of the electron transfer mediator ferrocenecarboxylic acid were produced by all three methods. Evaporation of horseradish peroxidase-gold sols produced electrodes with the best reproducibility and the widest linear amperometric response range. These electrodes can also easily be stored in a dry state. Although not as good as evaporation, electrodeposition also produced satisfactory electrodes. Electro-deposition provides the added advantage that it lends itself to the preparation of multi-enzyme/multi-analyte electrodes by the adsorption of different enzymes to separate gold sols, followed by sequential electrodeposition onto discrete areas of a multichannel electrode.

Mediator-free amperometric determination of toxic substances based on their inhibition of immobilized horseradish peroxidase.

We have demonstrated the feasibility of quantitatively detecting selected toxic materials through their inhibitory effect on an enzyme electrode that utilizes colloidal gold‐immobilized horseradish peroxidase and does not require a mediator. Quantitative detection of azide, cyanide, thiourea, sulfide, and dichromate is demonstrated. The sensitivity and inhibition kinetics for this immobilized enzyme electrode are found to be different from those observed previously for homogeneous horseradish peroxidase. Possible reasons for this difference are discussed. Due to the availability of a large number of enzymes and their toxic inhibitors, this work based on immobilized enzyme inhibition coupled to an electrode surface significantly broadens the possible applications of biosensors and offers alternative methods for toxic substance determination.

Electrochemical enzyme immunoassay for detection of toxic substances

Sensors that provide reliable, rapid measurement of toxic substances are needed to solve significant human health and safety problems. We developed a new biosensor design that combines the advantages of immunoassay with electrochemical response. We established that this enzyme-linked immunosensor measures toxic substances in biological samples. The biosensor consists of two major elements: (1) an electrical conducting layer having immobilized enzyme, polyclonal or monoclonal antibodies, and other necessary reagents, and (2) the electronic components used in the signal readout. The result is an amperometric immunoassay based on coupling the immunochemical reaction to the enzyme electrode response by using a soluble, electrochemically active mediator. The specific question addressed was: Does the systems immunochemical detection reliably respond at sufficiently low analyte concentrations? We present our results in these areas: (1) enzyme immobilization on colloidal gold; (2) colloidal gold-enzyme deposition on the electrode surface; (3) mediator-antigen conjugate synthesis; (4) antibody incorporation at the electrode surface; (5) bioelectrode characterization and optimization; and (6) immunosensor demonstration to detect antigen. Sensors that employ immunochemical detection will have broad applicability to detect/diagnose toxic substances in biological samples such as blood and urine and in environmental samples such as wastewater and drinking water.