Junko Enomoto

Acceleration of Vascular Sprouting from Fabricated Perfusable Vascular-Like Structures

Fabrication of vascular networks is essential for engineering three-dimensional thick tissues and organs in the emerging fields of tissue engineering and regenerative medicine. In this study, we describe the fabrication of perfusable vascular-like structures by transferring endothelial cells using an electrochemical reaction as well as acceleration of subsequent endothelial sprouting by two stimuli: phorbol 12-myristate 13-acetate (PMA) and fluidic shear stress. The electrochemical transfer of cells was achieved using an oligopeptide that formed a dense molecular layer on a gold surface and was then electrochemically desorbed from the surface. Human umbilical vein endothelial cells (HUVECs), adhered to gold-coated needles (ϕ600 μm) via the oligopeptide, were transferred to collagen gel along with electrochemical desorption of the molecular layer, resulting in the formation of endothelial cell-lined vascular-like structures. In the following culture, the endothelial cells migrated into the collagen gel and formed branched luminal structures. However, this branching process was strikingly slow (>14 d) and the cell layers on the internal surfaces became disrupted in some regions. To address these issues, we examined the effects of the protein kinase C (PKC) activator, PMA, and shear stress generated by medium flow. Addition of PMA at an optimum concentration significantly accelerated migration, vascular network formation, and its stabilization. Exposure to shear stress reoriented the cells in the direction of the medium flow and further accelerated vascular network formation. Because of the synergistic effects, HUVECs began to sprout as early as 3 d of perfusion culture and neighboring vascular-like structures were bridged within 5 d. Although further investigations of vascular functions need to be performed, this approach may be an effective strategy for rapid fabrication of perfusable microvascular networks when engineering three-dimensional fully vascularized tissues and organs.

Rapid engineering of endothelial cell-lined vascular-like structures in in situ crosslinkable hydrogels

Fabrication of perfusable vascular networks in vitro is one of the most critical challenges in the advancement of tissue engineering. Because cells consume oxygen and nutrients during the fabrication process, a rapid fabrication approach is necessary to construct cell-dense vital tissues and organs, such as the liver. In this study, we propose a rapid molding process using an in situ crosslinkable hydrogel and electrochemical cell transfer for the fabrication of perfusable vascular structures. The in situ crosslinkable hydrogel was composed of hydrazide-modified gelatin (gelatin-ADH) and aldehyde-modified hyaluronic acid (HA-CHO). By simply mixing these two solutions, the gelation occurred in less than 20 s through the formation of a stable hydrazone bond. To rapidly transfer cells from a culture surface to the hydrogel, we utilized a zwitterionic oligopeptide, which forms a self-assembled molecular layer on a gold surface. Human umbilical vein endothelial cells adhering on a gold surface via the oligopeptide layer were transferred to the hydrogel within 5 min, along with electrochemical desorption of the oligopeptides. This approach was applicable to cylindrical needles 200-700 µm in diameter, resulting in the formation of perfusable microchannels where the internal surface was fully enveloped with the transferred endothelial cells. The entire fabrication process was completed within 10 min, including 20 s for the hydrogel crosslinking and 5 min for the electrochemical cell transfer. This rapid fabrication approach may provide a promising strategy to construct perfusable vasculatures in cell-dense tissue constructs and subsequently allow cells to organize complicated and fully vascularized tissues while preventing hypoxic cell injury.

Rational Design of Prevascularized Large 3D Tissue Constructs Using Computational Simulations and Biofabrication of Geometrically Controlled Microvessels.

A major challenge in the development of clinically relevant 3D tissue constructs is the formation of vascular networks for oxygenation, nutrient supply, and waste removal. To this end, this study implements a multimodal approach for the promotion of vessel-like structures formation in stiff fibrin hydrogels. Computational simulations have been performed to identify the easiest microchanneled configuration assuring normoxic conditions throughout thick cylindrical hydrogels (8 mm height, 6 mm ∅), showing that in our configuration a minimum of three microchannels (600 μm ∅), placed in a non-planar disposition, is required. Using small hydrogel bricks with oxygen distribution equal to the microchanneled configuration, this study demonstrates that among different culture conditions, co-culture of mesenchymal and endothelial cells supplemented with ANG-1 and VEGF leads to the most developed vascular network. Microchanneled hydrogels have been then cultured in the same conditions both statically and in a bioreactor for 7 d. Unexpectedly, the combination between shear forces and normoxic conditions is unable to promote microvascular networks formation in three-channeled hydrogels. Differently, application of either shear forces or normoxic conditions alone results in microvessels outgrowth. These results suggest that to induce angiogenesis in engineered constructs, complex interactions between several biochemical and biophysical parameters have to be modulated.

Engineering thick cell sheets by electrochemical desorption of oligopeptides on membrane substrates

We developed a gold-coated membrane substrate modified with an oligopeptide layer that can be used to grow and subsequently detach a thick cell sheet through an electrochemical reaction. The oligopeptide CCRRGDWLC was designed to contain a cell adhesive domain (RGD) in the center and cysteine residues at both terminals. Cysteine contains a thiol group that forms a gold–thiolate bond on a gold surface. Cells attached to gold-coated membrane substrates via the oligopeptide layer were readily and noninvasively detached by applying a negative electrical potential to cleave the gold–thiolate bond. Because of the effective oxygen supply, fibroblasts vigorously grew on the membrane substrate and the thickness of the cell sheets was ∼60 μm at 14 days of culture, which was 2.9-fold greater than that of cells grown on a conventional culture dish. The cell sheets were detached after 7 min of electrical potential application. Using this approach, five layers of cell sheets were stacked sequentially with thicknesses reaching >200 μm. This approach was also beneficial for rapidly and readily transplanting cell sheets. Grafted cell sheets secreted collagen and remained at the transplanted site for at least 2 months after transplantation. This simple electrochemical cell sheet engineering technology is a promising tool for tissue engineering and regenerative medicine applications.

Catch-and-Release of Target Cells Using Aptamer-Conjugated Electroactive Zwitterionic Oligopeptide SAM

Nucleic acid aptamers possess attractive features such as specific molecular recognition, high-affinity binding, and rapid acquisition and replication, which could be feasible components for separating specific cells from other cell types. This study demonstrates that aptamers conjugated to an oligopeptide self-assembled monolayer (SAM) can be used to selectively trap human hepatic cancer cells from cell mixtures containing normal human hepatocytes or human fibroblasts. Molecular dynamics calculations have been performed to understand how the configurations of the aptamers are related to the experimental results of selective cell capture. We further demonstrate that the captured hepatic cancer cells can be detached and collected along with electrochemical desorption of the oligopeptide SAM, and by repeating these catch-and-release processes, target cells can be enriched. This combination of capture with aptamers and detachment with electrochemical reactions is a promising tool in various research fields ranging from basic cancer research to tissue engineering applications.

Comparisons of cell culture medium using distribution of morphological features in microdevice

As the number of available cell types grows, it becomes necessary to develop more effective ways to optimize the cell-culture medium for each cell line and culture condition. However, because of the vast number of parameters that must be decided, such as the combination of components, optimization is both laborious and costly. Microdevices are a cost-effective way to perform such evaluations because they use only a small volume of media and enable high-throughput analyses. However, assays performed in microdevices are themselves minimized, and each assay unit (well/chamber) commonly contains an insufficient number of cells for comprehensive evaluations such as gene-expression or flow-cytometry analyses. To address this issue, we introduced image-based analysis in conjunction with microdevice assays; this approach allows quantification of every cell in each assay unit. To quantitatively profile differences in cellular behaviors in a microdevice under different culture media conditions, we developed a non-staining image-based analysis method that utilizes cellular morphology. Our approach combines the structural advantages of microdevices, which can increase the stability of images, and the quantitative advantages of an image-based cell evaluation technique that utilizes time-course population change in several morphological features. Our results demonstrate that cellular changes due to small alterations in the concentration of serum in medium or differences in the basal medium can be profiled using only microscopic images.

Gold cleaning methods for preparation of cell culture surfaces for self-assembled monolayers of zwitterionic oligopeptides

Self-assembled monolayers (SAMs) have been used to elucidate interactions between cells and material surface chemistry. Gold surfaces modified with oligopeptide SAMs exhibit several unique characteristics, such as cell-repulsive surfaces, micropatterns of cell adhesion and non-adhesion regions for control over cell microenvironments, and dynamic release of cells upon external stimuli under culture conditions. However, basic procedures for the preparation of oligopeptide SAMs, including appropriate cleaning methods of the gold surface before modification, have not been fully established. Because gold surfaces are readily contaminated with organic compounds in the air, cleaning methods may be critical for SAM formation. In this study, we examined the effects of four gold cleaning methods: dilute aqua regia, an ozone water, atmospheric plasma, and UV irradiation. Among the methods, UV irradiation most significantly improved the formation of oligopeptide SAMs in terms of repulsion of cells on the surfaces. We fabricated an apparatus with a UV light source, a rotation table, and HEPA filter, to treat a number of gold substrates simultaneously. Furthermore, UV-cleaned gold substrates were capable of detaching cell sheets without serious cell injury. This may potentially provide a stable and robust approach to oligopeptide SAM-based experiments for biomedical studies.

Cell Detachment for Engineering Three-Dimensional Tissues

Dynamic control of the biointerface between adherent cells and materials may provide a promising approach for the detachment and manipulation of cells in vitro. Thermoresponsive, electroresponsive, photoresponsive, pH-responsive, and magnetic systems have been reported as mechanisms for such control. These systems have been utilized to detach specific cells in a spatially controlled manner and to assemble cellular building blocks such as cell sheets and spheroids to engineer three-dimensional tissues and organs. Because assembled and thicker tissues require vascular networks to supply oxygen and nutrients throughout the constructs, some of these systems have also been employed to fabricate vascular structures in engineered tissues. This chapter provides an overview of the current technological advancements in the dynamic control of the biointerface, with particular emphasis on tissue engineering applications. A major focus of this chapter is on the application of electrochemistry to cell detachment and to engineering vascular structures. Current challenges and future prospects of these systems have been discussed.