Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Junwei Xu is active.

Publication


Featured researches published by Junwei Xu.


ACS Applied Materials & Interfaces | 2015

Layered Bi2Se3 Nanoplate/Polyvinylidene Fluoride Composite Based n-type Thermoelectric Fabrics

Chaochao Dun; Corey A. Hewitt; Huihui Huang; Junwei Xu; David S. Montgomery; Wanyi Nie; Qike Jiang; David L. Carroll

In this study, we report the fabrication of n-type flexible thermoelectric fabrics using layered Bi2Se3 nanoplate/polyvinylidene fluoride (PVDF) composites as the thermoelectric material. These composites exhibit room temperature Seebeck coefficient and electrical conductivity values of -80 μV K(-1) and 5100 S m(-1), respectively, resulting in a power factor approaching 30 μW m(-1)K(-2). The temperature-dependent thermoelectric properties reveal that the composites exhibit metallic-like electrical conductivity, whereas the thermoelectric power is characterized by a heterogeneous model. These composites have the potential to be used in atypical applications for thermoelectrics, where lightweight and flexible materials would be beneficial. Indeed, bending tests revealed excellent durability of the thermoelectric fabrics. We anticipate that this work may guide the way for fabricating high performance thermoelectric fabrics based on layered V-VI nanoplates.


Scientific Reports | 2016

Achieving High Performance in AC-Field Driven Organic Light Sources.

Junwei Xu; David L. Carroll; Gregory M. Smith; Chaochao Dun; Yue Cui

Charge balance in organic light emitting structures is essential to simultaneously achieving high brightness and high efficiency. In DC-driven organic light emitting devices (OLEDs), this is relatively straight forward. However, in the newly emerging, capacitive, field-activated AC-driven organic devices, charge balance can be a challenge. In this work we introduce the concept of gating the compensation charge in AC-driven organic devices and demonstrate that this can result in exceptional increases in device performance. To do this we replace the insulator layer in a typical field-activated organic light emitting device with a nanostructured, wide band gap semiconductor layer. This layer acts as a gate between the emitter layer and the voltage contact. Time resolved device characterization shows that, at high-frequencies (over 40 kHz), the semiconductor layer allows for charge accumulation in the forward bias, light generating part of the AC cycle and charge compensation in the negative, quiescent part of the AC cycle. Such gated AC organic devices can achieve a non-output coupled luminance of 25,900 cd/m2 with power efficiencies that exceed both the insulator-based AC devices and OLEDs using the same emitters. This work clearly demonstrates that by realizing balanced management of charge, AC-driven organic light emitting devices may well be able to rival today’s OLEDs in performance.


Advanced Materials | 2017

Imbedded Nanocrystals of CsPbBr3 in Cs4PbBr6: Kinetics, Enhanced Oscillator Strength, and Application in Light-Emitting Diodes

Junwei Xu; Wenxiao Huang; Peiyun Li; Drew R. Onken; Chaochao Dun; Yang Guo; K. B. Ucer; Chang Lu; Hongzhi Wang; Scott M. Geyer; Richard T. Williams; David L. Carroll

Solution-grown films of CsPbBr3 nanocrystals imbedded in Cs4 PbBr6 are incorporated as the recombination layer in light-emitting diode (LED) structures. The kinetics at high carrier density of pure (extended) CsPbBr3 and the nanoinclusion composite are measured and analyzed, indicating second-order kinetics in extended and mainly first-order kinetics in the confined CsPbBr3 , respectively. Analysis of absorption strength of this all-perovskite, all-inorganic imbedded nanocrystal composite relative to pure CsPbBr3 indicates enhanced oscillator strength consistent with earlier published attribution of the sub-nanosecond exciton radiative lifetime in nanoprecipitates of CsPbBr3 in melt-grown CsBr host crystals and CsPbBr3 evaporated films.


Small | 2017

Ultrathin, Washable, and Large-Area Graphene Papers for Personal Thermal Management

Yang Guo; Chaochao Dun; Junwei Xu; Jiuke Mu; Peiyun Li; Liwen Gu; Chengyi Hou; Corey A. Hewitt; Qinghong Zhang; Yaogang Li; David L. Carroll; Hongzhi Wang

Freestanding, flexible/foldable, and wearable bifuctional ultrathin graphene paper for heating and cooling is fabricated as an active material in personal thermal management (PTM). The promising electrical conductivity grants the superior Joule heating for extra warmth of 42 °C using a low supply voltage around 3.2 V. Besides, based on its high out-of-plane thermal conductivity, the graphene paper provides passive cooling via thermal transmission from the human body to the environment within 7 s. The cooling effect of graphene paper is superior compared with that of the normal cotton fiber, and this advantage will become more prominent with the increased thickness difference. The present bifunctional graphene paper possesses high durability against bending cycles over 500 times and wash time over 1500 min, suggesting its great potential in wearable PTM.


Applied Physics Letters | 2015

Solution-processed yellow-white light-emitting diodes based on mixed-solvent dispersed luminescent ZnO nanocrystals

Huihui Huang; Chaochao Dun; Wenxiao Huang; Yue Cui; Junwei Xu; Qike Jiang; Changwen Xu; Han Zhang; Shuangchun Wen; David L. Carroll

Yellow-white light emitting diodes (LEDs) using ZnO nanocrystals (NCs) as the active materials have been fabricated based on a solution-processed technology. By utilizing a polar-nonpolar mixed-solvent dispersion strategy, uniform dispersion of ZnO NCs with enhanced emission properties has been achieved. The ZnO NCs based LED devices prepared from the mixed-solvent strategy show much improved electroluminescence properties that exhibit a broad yellow-white emission peaks at ∼555 nm with a maximum brightness of 100 cd/m2 and a color rendering index of 77.25. The device mechanism of the LED device was discussed in terms of energy band diagram and current-voltage characteristics.


Advanced Materials | 2017

2D Chalcogenide Nanoplate Assemblies for Thermoelectric Applications

Chaochao Dun; Corey A. Hewitt; Qi Li; Junwei Xu; Drew C. Schall; Hyunsu Lee; Qike Jiang; David L. Carroll

Engineered atomic dislocations have been used to create a novel, Sb2 Te3 nanoplate-like architecture that exhibits a unique antisymmetric chirality. High-resolution transmission electron microscopy (HRTEM) coupled with atomic force microscopy and X-ray photoelectron spectroscopy reveals the architectures to be extremely well ordered with little residual strain. Surface modification of these topologically complex macrostructures (≈3 µm) has been achieved by direct growth of metallic Ag nanoparticles onto the edge sites of the Sb2 Te3 . Again, HRTEM shows this nanoparticle decoration to be atomically sharp at the boundaries and regularly spaced along the selvedge of the nanostructure. Transport experiments of densified films of these assemblies exhibit marked increases in carrier density after nanoengineering, yielding 3.5 × 104 S m-1 in electrical conductivity. An increased Seebeck coefficient by 20% in parallel with electrical conductivity is also observed. This gives a thermoelectric power factor of 371 µW m-1 K-2 , which is the highest value for a flexible, freestanding film to date. These results suggest an entirely new direction in the search for wearable power harvesters based on topologically complex, low-dimensional nanoassemblies.


Advanced Materials | 2017

Self-Assembled Heterostructures: Selective Growth of Metallic Nanoparticles on V2–VI3 Nanoplates

Chaochao Dun; Corey A. Hewitt; Qi Li; Yang Guo; Qike Jiang; Junwei Xu; Gabriel Marcus; Drew C. Schall; David L. Carroll

Precise control of the selective growth of heterostructures with specific composition and functionalities is an emerging and extremely challenging topic. Here, the first investigation of the difference in binding energy between a series of metal-semiconductor heterostructures based on layered V2 -VI3 nanostructures is investigated by means of density functional theory. All lateral configurations show lower formation energy compared with that of the vertical ones, implying the selective growth of metal nanoparticles. The simulation results are supported by the successful fabrication of self-assembled Ag/Cu-nanoparticle-decorated p-type Sb2 Te3 and n-type Bi2 Te3 nanoplates at their lateral sites through a solution reaction. The detailed nucleation-growth kinetics are well studied with controllable reaction times and precursor concentrations. Accompanied by the preserved topological structure integrity and electron transfer on the semiconductor host, exceptional properties such as dramatically increased electrical conductivity are observed thanks to the pre-energy-filtering effect before carrier injection. A zigzag thermoelectric generator is built using Cu/Ag-decorated Sb2 Te3 and Bi2 Te3 as p-n legs to utilize the temperature gradient in the vertical direction. Synthetic approaches using similar chalcogenide nanoplates as building blocks, as well as careful control of the dopant metallic nanoparticles or semiconductors, are believed to be broadly applicable to other heterostructures with novel applications.


ACS Applied Materials & Interfaces | 2018

Wearable Thermoelectric Devices Based on Au-Decorated Two-Dimensional MoS2

Yang Guo; Chaochao Dun; Junwei Xu; Peiyun Li; Wenxiao Huang; Jiuke Mu; Chengyi Hou; Corey A. Hewitt; Qinghong Zhang; Yaogang Li; David L. Carroll; Hongzhi Wang

Two-dimensional (2D) materials have recently opened a new avenue to flexible thermoelectric materials with enhanced performance because of their unique electronic transport properties. Here, we report a feasible approach to improve the thermoelectric performance of transition-metal dichalcogenides by effectively decorating 2D MoS2 with Au nanoparticles using in situ growth. The present Au-decorated MoS2-assembled heterojunction system shows a certain decoupled phenomenon, that is, the Seebeck coefficient and conductivity increased simultaneously. This is due to the occurrence of p-type doping of the MoS2 2H phase and injection energy filtering of dopant-originated carriers around the local band bending at the interface. The composite flexible films can achieve a power factor value of 166.3 μW m-1 K-2 at room temperature, which have great potential for harvesting human body heat.


Physical Chemistry Chemical Physics | 2015

Flexible thermoelectric fabrics based on self-assembled tellurium nanorods with a large power factor

Chaochao Dun; Corey A. Hewitt; Huihui Huang; David S. Montgomery; Junwei Xu; David L. Carroll


Nano Energy | 2015

Flexible n-type thermoelectric films based on Cu-doped Bi2Se3 nanoplate and Polyvinylidene Fluoride composite with decoupled Seebeck coefficient and electrical conductivity

Chaochao Dun; Corey A. Hewitt; Huihui Huang; Junwei Xu; Chongjian Zhou; Wenxiao Huang; Yue Cui; Wei Zhou; Qike Jiang; David L. Carroll

Collaboration


Dive into the Junwei Xu's collaboration.

Top Co-Authors

Avatar

David L. Carroll

Rensselaer Polytechnic Institute

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Qike Jiang

Dalian Institute of Chemical Physics

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Peiyun Li

Wake Forest University

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Yue Cui

Wake Forest University

View shared research outputs
Researchain Logo
Decentralizing Knowledge