Junyan Xiao

Hole-conductor-free perovskite organic lead iodide heterojunction thin-film solar cells: High efficiency and junction property

Efficient hole-conductor-free organic lead iodide thin film solar cells have been fabricated with a sequential deposition method, and a highest efficiency of 10.49% has been achieved. Meanwhile, the ideal current-voltage model for a single heterojunction solar cell is applied to clarify the junction property of the cell. The model confirms that the TiO2/CH3NH3PbI3/Au cell is a typical heterojunction cell and the intrinsic parameters of the cell are comparable to that of the high-efficiency thin-film solar cells.

Modified Two-Step Deposition Method for High-Efficiency TiO2/CH3NH3PbI3 Heterojunction Solar Cells

Hybrid organic-inorganic perovskites (e.g., CH3NH3PbI3) are promising light absorbers for the third-generation photovoltaics. Herein we demonstrate a modified two-step deposition method to fabricate a uniform CH3NH3PbI3 capping layer with high-coverage and thickness of 300 nm on top of the mesoporous TiO2. The CH3NH3PbI3 layer shows high light-harvesting efficiency and long carrier lifetime over 50 ns. On the basis of the as-prepared film, TiO2/CH3NH3PbI3 heterojunction solar cells achieve a power conversion efficiency of 10.47% with a high open-circuit voltage of 948 mV, the highest recorded to date for hole-transport-material-free (HTM-free) perovskite-based heterojunction cells. The efficiency exceeding 10% shows promising prospects for the HTM-free solar cells based on organic lead halides.

An all-carbon counter electrode for highly efficient hole-conductor-free organo-metal perovskite solar cells

An all-carbon counter electrode has been fabricated for hole-conductor-free organo-metal perovskite heterojunction thin-film solar cells by a simple and low-temperature process. The counter electrode consisted of two parts: a mesoscopic carbon layer for good contact with the perovskite layer, and a piece of industrial flexible graphite sheet as the conducting electrode. Several types of carbon materials were employed in the counter electrodes and tested. From an electrochemical impedance study, it is found that the contact between the counter electrode and perovskite layer has a significant influence on the charge transport properties of the cells. A power conversion efficiency up to 10.2% has been achieved by hole-conductor-free mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells with the counter electrode containing a composition of graphite and carbon black, which inspires a new promising route towards low-cost and large-scale commercialization of perovskite solar cells.

Efficient hybrid mesoscopic solar cells with morphology-controlled CH3NH3PbI3-xClx derived from two-step spin coating method.

A morphology-controlled CH3NH3PbI3-xClx film is synthesized via two-step solution deposition by spin-coating a mixture solution of CH3NH3Cl and CH3NH3I onto the TiO2/PbI2 film for the first time. It is revealed that the existence of CH3NH3Cl is supposed to result in a preferential growth along the [110] direction of perovskite, which can improve both the crystallinity and surface coverage of perovskite and reduce the pinholes. Furthermore, the formation process of CH3NH3PbI3-xClx perovskite is explored, in which intermediates containing chlorine are suggested to exist. 13.12% of power conversion efficiency has been achieved for the mesoscopic cell, higher than 12.08% of power conversion efficiency of the devices fabricated without CH3NH3Cl via the same process. The improvement mainly lies in the increasing open-circuit photovoltage which is ascribed to the reduction of reverse saturation current density.

Efficient CH3NH3PbI3 perovskite solar cells with 2TPA-n-DP hole-transporting layers

CH3NH3PbI3 perovskite solar cells with 2TPA-n-DP (TPA = 4,4′-((1E, 1′E,3E,3′E)-[1,1′-biphenyl]-4,4′-diylbis(buta-1,3-diene-4,1-diyl)); DP = bis(N,N-di-p-tolylaniline); n = 1, 2, 3, 4) as hole-transporting materials (HTMs) have been fabricated. After optimization of the mesoporous TiO2 film thickness, devices based on 2TPA-2-DP with power conversion efficiencies (PCEs) of up to 12.96% have been achieved, comparable to those of devices with (2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spirobifluorene) (spiro-OMeTAD) as HTM under similar conditions. Further time-resolved photoluminescence (PL) measurements showed a fast charge transfer process at the perovskite/2TPA-2-DP interface. With the aid of electrochemical impedance spectra, a study of the electron blocking ability of 2TPA-2-DP in the device reveals that the presence of 2TPA-2-DP can greatly increase charge transfer resistance at the HTM/Au interface in the device, thus reducing the recombination. Furthermore, the perovskite solar cells based on these four HTMs exhibit good stability after testing for one month.

ZnO nanoparticle based highly efficient CdS/CdSe quantum dot-sensitized solar cells

20 nm ZnO nanoparticles are used to fabricate the mesoporous photoanode of the CdS/CdSe quantum dot-sensitized solar cells by the simple doctor blade method. A maximum power conversion efficiency of 4.46% has been achieved, which indicated exciting prospects for ZnO nanoparticle based quantum dot-sensitized solar cells.

Perovskite thin-film solar cell: excitation in photovoltaic science

As a new member of thin-film solar cells, the perovskite solar cells have inspired a new research hot in new photoelectric materials and devices, and have given a new energy to the photovoltaic science. Currently, various device structures, including mesoporous and planar, with and without hole transport material have been developed. In this review, much focus has been addressed to the deposition of high-quality perovskite films, structural optimization, and interface engineering as well as the understanding of the charge generation, transport, and recombination mechanisms of the devices. Furthermore, cost, stability, and environment issues of the cell are also discussed for commercial application.

Pressure-assisted CH3NH3PbI3 morphology reconstruction to improve the high performance of perovskite solar cells

The pressure is introduced as a parameter in the post-treat process for perovskite solar cells. Via a hot-pressing method, the rough surface of perovskite film becomes smooth, and the pin-holes can be cured. This modified perovskite morphology can help to improve charge transporting and eliminate recombination in the perovskite solar cells. Moreover, significantly enhanced photovoltaic performances with high PCEs of 10.84% and 16.07% are thus achieved in HTM-free type and spiro-OMeTAD based cells, respectively.

A thin pristine non-triarylamine hole-transporting material layer for efficient CH3NH3PbI3 perovskite solar cells

A new non-traditional organic hole-transporting material (HTM), 4-(4-phenyl-4-α-naphthylbutadienyl)-N,N-bis(4-benzyl)-aniline (PNBA), has been employed in CH3NH3PbI3 perovskite solar cells for the first time. The pore filling of PNBA into mesoporous TiO2/CH3NH3PbI3 scaffold is investigated in detail. As high as 11.4% of light-to-electricity conversion efficiency has been achieved, comparable to corresponding spiro-OMeTAD-based devices under the same conditions. It is revealed that the uniform and thin PNBA film is sufficient as a HTM for perovskite solar cells, and can facilitate hole transport to the metal cathode and also block electron transfer from the perovskite to the metal cathode.

The Effect of Humidity upon the Crystallization Process of Two-Step Spin-Coated Organic–Inorganic Perovskites

Moisture is shown to activate the reaction between PbI2 and methylammonium halides. In addition, two activating mechanisms are proposed for the formation of CH3 NH3 PbI3 and CH3 NH3 PbI3-x Clx films from a series of carefully controlled experiments. When these rapidly formed perovskite films are directly fabricated into the devices, poor photovoltaic properties are found, due to heavy surface charge recombination. However, the cell performance can be significantly enhanced to 13.63 % and to over 12 % in the steady state for CH3 NH3 PbI3 and to 15.50 % and over 14 % in the steady state for CH3 NH3 PbI3-x Clx , if the rapidly formed perovskite film is annealed. Thus, it is believed that moisture (below 60 % RH) is not a problem for the fabrication of highly efficient perovskite solar cells.