Junzuo Wang

Synthesis, isolation, characterization, and properties of small-size aromatic macrocycles for poly(arylene ether ketone)s

A series of macrocyclic arylene ether ketone oligomers from 4,4′-difluorobenzophenone, 2,4′-difluorobenzophenone and 1,3-bis(4′-fluorobenzoyl)benzene were prepared via aromatic nucleophilic substitution according to the pseudo-high dilution principle. Small-size aromatic macrocycles were isolated by silica gel column chromatography with cyclohexane/ethyl acetate as eluent. The chemical structures of these small-size macrocycles were characterized by matrix-assisted laser desorption ionization–time-of-flight–mass spectrometry (MALDI–TOF–MS), IR, 19F-,1H-, and 13C-NMR, and GPC techniques. Molecular chain length and steric hindrance of monomers affected the product compositions. The NMR results show that there are different chemical shifts in the different ring-size macrocyclic poly arylene ether ketones in spite of having the same repeating unit. The crystallizability and thermal properties of small-size arylene ether ketone macrocycles were also investigated by DSC, WAXD, TGA, and the results suggest that the crystallization and thermal properties are related to their intrinsic chemical structures.

Crystallization behavior of poly(ether ether ketone ketone)

The melting behavior of semicrystalline poly(ether ether ketone ketone) (PEEKK) has been studied by differential scanning calorimetry (DSC). When PEEKK is annealed from the amorphous state, it usually shows two melting peaks. The upper melting peaks arise first, and the lower melting peaks are developed later. The upper melting peaks shown in the DSC thermogram are the combination (addition) of three parts: initial crystal formed before scanning; reorganization; and melting-recrystallization of lower melting peaks in the DSC scanning period. In the study of isothermal crystallization kinetics, the Avrami equation was used to analyze the primary process of the isothermal crystallization; the Avrami constant, n, is about 2 for PEEKK from the melt and 1.5 for PEEKK from the glass state. According to the Lauritzen-Hoffman equation, the kinetic parameter of PEEKK from the melt is 851.5 K; the crystallization kinetic parameter of PEEKK is higher than that of PEEK, and suggests the crystallizability of PEEKK is less than that of PEEK. The study of crystallization on PEEKK under nonisothermal conditions is also reported for cooling rates from 2.5 degrees C/min to 40 degrees C/min, and the nonisothermal condition was studied by Mandelkern analysis. The results show the nonisothermal crystallization is different from the isothermal crystallization

Synthesis and properties of poly(ether ether ketone ketone)–poly(ether sulfone) block copolymers

Poly(ether ether ketone ketone)-poly(ether sulfone) (PEEKK/PES) block copolymers were prepared from the corresponding oligomers via a nucleophilic aromatic substitution reaction, and the M n of the PEEKK segment was fixed at 12,000, while the M n s of the PES segment ranged from 250 to 12,680. The different properties of the copolymers were investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA). The results showed that the relationship between T g and compositions of copolymers approximately followed the formula 1/T g = W 1 /T g1 + W 2 /Tg 2 . The PES content and the segment length of the copolymers had a significant influence on their melting points and crystallization behavior. The thermal properties and dynamic mechanical behavior of the copolymers were also studied. In the study of isothermal crystallization, the copolymers have the same nucleation mechanism and crystal growth as that of pure PEEKK. Owing to the introduction of the PES segment into the PEEKK main chain, it increases the free energy which forms the critical crystal nucleus and produces a resistant action to the whole crystallization process of the PEEKK segment.

Crystallization behavior of a novel poly(aryl ether ketone): PEDEKmK

Isothermal melt and cold crystallization kinetics of PEDEKmK linked by meta-phenyl and biphenyl were investigated by differential scanning calorimetry in two temperature regions. Avrami analysis is used to describe the primary stages of the melt and cold crystallization, with exponent nA 2 and nA 4, respectively. The activa- tion energies are 0118 kJ/mol and 510 kJ/mol for crystallization from the melt and the glassy states, respectively. The equilibrium melting point T 0 is estimated to be 3097C by using the Hoffman-Weeks approach, which compares favorably with determi- nation from the Thomson-Gibbs method. The lateral and end surface free energies derived from the Lauritzen-Hoffman spherulitic growth rate equation are s A 8.45 erg/cm 2 and seA 45.17 erg/cm 2 , respectively. The work of chain folding q is determined as 3.06 kcal/mol. These observed crystallization characteristics of PEDEKmK are com- pared with those of the other members of poly(aryl ether ketone) family. q 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1451-1461, 1997

Structure, crystallization, and properties of poly(aryl ether ether ketone ketone)s containing meta‐phenyl links and their copolymers

Poly(aryl ether ether ketone ketone)s (PEEKK) containing meta-phenyl links and their series of copolymers were synthesized and investigated by both X-ray and differential scanning calorimetry (DSC) methods. Results showed that the heat properties of this kind of copolymer depended greatly on the content of meta-phenyl links in the copolymer system, in which occurred the lowest melting point. Results from X-rays showed that PEEKK containing meta-phenyl links had no (111) crystal face diffraction. These proved that meta-phenyl links had introduced asymmetrical factors, which had produced poor crystal structure and difficulty in crystallization. Even so, the modification of PEEKK by introducing the meta-phenyl links improved the polymer composite performances, e.g., the copolymer M2, which kept performances close to PEEKK but better than PEEK. DSC results of M2 showed that its Avrami number (n) was 1.5 and its crystal grew fibrously from isothermal crystallization of the melting state, while for the nonisothermal crystallization from the melting state, n was 4.4 to the spherical crystal growth, and the activation energy (ΔE) of crystallization was 184 kJ/mol, which was less than the ΔE of 296 kJ/mol for PEEKK crystallized from the nonisothermal melting state. When M2 was isothermally crystallized from the rubber state, its n was 2 to the disklike crystal growth, while its n was 4.6 to the spherulitic crystal growth for the nonisothermal crystallization state of melting. The isothermal crystallization process was different from the nonisothermal process in the crystal nucleation and growth for M2.

A crystalline cyclic (aryl ether ketone) oligomer containing tetramethylbiphenylene moiety

Abstract A highly methyl-substituted cyclic (aryl ether ketone) oligomer was successfully synthesized by the reaction of 3,3′,5,5′-tetramethyl-4,4′-biphenol (TMBPH) and 4,4′-difluorobenzophenone with the use of a pseudo- high dilution condition. The structure of the cyclic oligomer was characterized by IR, NMR, matrix-assisted laser desorption ionization time-of-flight mass spectroscopy and gel permeation chromatography analyses. From the measurement of wide angle X- ray diffraction it was revealed that the cyclic oligomer is crystalline, in contrast to the fact that the corresponding linear polymer is amorphous. The difference in the crystallization behavior is discussed based on molecular modeling.