Jurairat Nunthanid

Drug physical state and drug–polymer interaction on drug release from chitosan matrix films

Four different grades of chitosan varying in molecular weight and degree of deacetylation were used to prepare chitosan films. Salicylic acid and theophylline were incorporated into cast chitosan films as model acidic and basic drugs, respectively. Crystalline characteristics, thermal behavior, drug-polymer interaction and drug release behaviors of the films were studied. The results of Fourier transform infrared and solid-state 13C NMR spectroscopy demonstrated the drug-polymer interaction between salicylic acid and chitosan, resulting in salicylate formation, whereas no drug-polymer interaction was observed in theophylline-loaded chitosan films. Most chitosan films loaded with either salicylic acid or theophylline exhibited a fast release pattern, whereas the high viscosity chitosan films incorporated with salicylic acid showed sustained release patterns in distilled water. The sustained release action of salicylic acid from the high viscosity chitosan films was due to the drug-polymer interaction. The mechanism of release was Fickian diffusion control with subsequent zero order release. It was suggested that the swelling property, dissolution characteristics of the polymer films, pK(a) of drugs and especially drug-polymer interaction were important factors governing drug release patterns from chitosan films.

Calcium pectinate gel beads for controlled release drug delivery : I. Preparation and in vitro release studies

Calcium pectinate gel (CPG) beads of indomethacin, a poorly soluble drug, were prepared by dispersing indomethacin in a solution of pectin and then dropping the dispersion into calcium chloride solution. The droplets instantaneously formed gelled spheres by ionotropic gelation. The effect of several factors such as pectin type, the presence of a hardening agent and the drug loading were investigated on the percentage of drug entrapped, size distribution and drug release from the CPG beads. The release characteristics were studied using the rotating basket dissolution method. Strong spherical beads with narrow size distributions, high yields and good entrapment efficiencies could be prepared. All factors investigated have significantly affected the release of indomethacin from CPG beads. The mechanism of drug release from CPG beads followed the diffusion controlled model for an inert porous matrix. Therefore, calcium pectinate gel could be a useful carrier for controlled release drug delivery of poorly soluble drugs.

Use of spray-dried chitosan acetate and ethylcellulose as compression coats for colonic drug delivery: effect of swelling on triggering in vitro drug release.

Spray-dried chitosan acetate (CSA) and ethylcellulose (EC) were used as new compression coats for 5-aminosalicylic acid tablets. Constrained axial or radial swelling of pure CSA and EC/CSA tablets in 0.1 N HCl (stage I), Tris-HCl, pH 6.8 (stage II), and acetate buffer, pH 5.0 (stage III), was investigated. Factors affecting in vitro drug release, i.e., % weight ratios of coating polymers, dip speeds of dissolution apparatus or pH of medium or colonic enzyme (beta-glucosidase) in stage III, and use of a super disintegrant in core tablets, were evaluated. Swollen CSA gel dissolved at lower pH and became less soluble at higher pH. The mechanism of swelling was Fickian diffusion fitting well into both Higuchis and Korsmeyer-Peppas models. EC:CSA, at 87.5:12.5% weight ratio, provided lag time rendering the tablets to reach stage III (simulated colonic fluid of patients), and the drug was released over 90% within 12 h. The system was a dual time- and pH-control due to the insolubility of EC suppressing water diffusion and the swelling of CSA in the stages I and II. The erosion of CSA gel in the stage III induced the disintegration of the coat resulting in rapid drug release. The lower dip speed and higher pH medium delayed the drug release, while a super disintegrant in the cores enhanced the drug release and no enzyme effect was observed.

Effect of Chitosan Salts and Molecular Weight on a Nanoparticulate Carrier for Therapeutic Protein

The objective of this study was to investigate the potential of chitosan salts as a carrier in the preparation of protein-loaded nanoparticles. Glutamic and aspartic acids were used to prepare chitosan salts of 35, 100, and 800 KDa. Nanoparticles of chitosan base, chitosan glutamate, and chitosan aspartate were produced by ionotropic gelation with sodium tripolyphosphate (TPP). Bovine serum albumin (BSA) was applied as a model protein at loading concentrations ranging from 0.2 to 2 mg/mL. The size of the nanoparticles, as measured by photon correlation spectroscopy, was in the range of 195 to 3450 nm, depending on type and molecular weight of chitosan. Nanoparticles prepared with higher molecular weight chitosan showed larger sizes. The encapsulation was controlled by the competition of BSA in forming ionic cross-linking with chitosan and by the entrapment of BSA during the gelation process. Higher BSA encapsulation efficiency (EE) was obtained for nanoparticles prepared with chitosan salts compared to those prepared with the base. The higher EE was a result of a higher degree of ionization, causing more active sites to interact with BSA. In addition, a higher and faster release of BSA from the nanoparticles into pH 7.4 buffer medium was observed for nanoparticles of the chitosan salts than was observed for nanoparticles of the chitosan base. The higher and faster release was attributed to higher EE and lower entrapment of BSA within the matrix of the nanoparticle during the gelation process. The influence of molecular weight on the property of nanoparticles exhibited different effects. The difference was a result of different organic acids used to prepare nanoparticles leading to the difference in polymer conformation and viscosity of organic acid solution. Therefore, this study showed that the characteristics of chitosan nanoparticles loaded with a protein drug could be readily modulated by changing the salt form or the molecular weight of the chitosan carrier.

Modulation of drug release kinetics of shellac-based matrix tablets by in-situ polymerization through annealing process

A new oral-controlled release matrix tablet based on shellac polymer was designed and developed, using metronidazole (MZ) as a model drug. The shellac-based matrix tablets were prepared by wet granulation using different amounts of shellac and lactose. The effect of annealing temperature and pH of medium on drug release from matrix tablets was investigated. The increased amount of shellac and increased annealing temperature significantly affected the physical properties (i.e., tablet hardness and tablet disintegration) and MZ release from the matrix tablets. The in-situ polymerization played a major role on the changes in shellac properties during annealing process. Though the shellac did not dissolve in acid medium, the MZ release in 0.1N HCl was faster than in pH 7.3 buffer, resulting from a higher solubility of MZ in acid medium. The modulation of MZ release kinetics from shellac-based matrix tablets could be accomplished by varying the amount of shellac or annealing temperature. The release kinetics was shifted from relaxation-controlled release to diffusion-controlled release when the amount of shellac or the annealing temperature was increased.

Impact of salt form and molecular weight of chitosan on swelling and drug release from chitosan matrix tablets

Magnetic resonance imaging (MRI) and gravimetric techniques were used to assess swelling and erosion behaviors of hydrophilic matrix tablets made of chitosan. The impact of salt form, molecular weight (MW) and dissolution medium on swelling behavior and drug (theophylline) release was studied. The matrix tablets made of chitosan glycolate (CGY) showed the greatest swelling in both acid and neutral media, compared to chitosan aspartate, chitosan glutamate and chitosan lactate. MRI illustrated that swelling region of CGY in both media was not different in the first 100 min but glassy region (dry core) in 0.1N HCl was less than in pH 6.8 buffer. The tablets prepared from chitosan with high MW swelled greater than those of low MW. Moreover, CGY can delay drug release in the acid condition due to thick swollen gel and low erosion rate. Therefore, CGY may be suitably applied as sustained drug release polymer or enteric coating material.

Self-Nanoemulsifying Drug Delivery System of Nifedipine: Impact of Hydrophilic–Lipophilic Balance and Molecular Structure of Mixed Surfactants

A simple but novel mixed surfactant system was designed to fabricate a self-nanoemulsifying drug delivery system (SNEDDS) based on hydrophilic–lipophilic balance (HLB) value. The impacts of HLB and molecular structure of surfactants on the formation of SNEDDS were investigated. After screening various oils and surfactants, nifedipine (NDP)-loaded liquid SNEDDS was formulated with Imwitor® 742 as oil and Tween®/Span® or Cremophor®/Span® as mixed surfactant. Droplet size of the emulsions obtained after dispersing SNEDDS containing Tween®/Span® in aqueous medium was independent of the HLB of a mixed surfactant. The use of the Cremophor®/Span® blend gave nanosized emulsion at higher HLB. The structure of the surfactant was found to influence the emulsion droplet size. Solid SNEDDS was then prepared by adsorbing NDP-loaded liquid SNEDDS comprising Cremophor® RH40/Span® 80 onto Aerosil® 200 or Aerosil® R972 as inert solid carrier. Solid SNEDDS formulations using higher amounts (30–50% w/w) of Aerosil® 200 exhibited good flow properties with smooth surface and preserved the self-emulsifying properties of liquid SNEDDS. Differential scanning calorimetry and X-ray diffraction studies of solid SNEDDS revealed the transformation of the crystalline structure of NDP due to its molecular dispersion state. In vitro dissolution study demonstrated higher dissolution of NDP from solid SNEDDS compared with NDP powder.

Effect of alkali treatment on properties of native shellac and stability of hydrolyzed shellac

The objective of this study was to investigate the effect of alkali treatment on properties of shellac. The native shellac was treated with sodium hydroxide for 15, 30, and 60 min to obtain hydrolyzed shellac. All types of shellac, namely native and hydrolyzed shellac at various times of treatment, were then prepared in films as free acid and ammonium salt forms by using ethanol and ammonium hydroxide solution, respectively. The results showed that alkali treatment caused an increase in acid value and a decrease in ester value. This is due to higher free carboxylic and hydroxyl groups caused by ester bond breaking. The longer the alkali treatment the higher impact of bond breaking, therefore, causing an increase in acid value, solubility at pH 7, strain, a decrease in ester value, water vapor permeability coefficient, and stress. The films were then kept at 40°C, 75% RH for a period of three months. The aging effect led to an esterification of free carboxylic and hydroxyl groups, resulting in the significant change of acid value, ester value, and insoluble solid for both native and hydrolyzed shellac films in acid form. On the other hand, all types of shellac films in ammonium salt form exhibited a reasonable stability in physicochemical and mechanical properties as all films were protected from the esterification due to the formation of ammonium salt at the carboxylic binding site. It could be concluded that alkali treatment could produce hydrolyzed shellac with higher solubility in the intestine, the stability was yet in dilemma unless the shellac was in an ammonium salt form. The result obtained could, thus, provide a guideline in the use of shellac.

Composite Film-Coated Tablets Intended for Colon-Specific Delivery of 5-Aminosalicylic Acid: Using Deesterified Pectin

Combinations of Eudragit® RS and deesterified pectin, polygalacturonic acid (PGA), or its potassium and sodium salts, when applied as a film coat, has a potential value as a colon-specific delivery system. Dispersions of PGA in Eudragit RS were used as the film former for coating of 5-aminosalicylic acid (5-ASA) tablet cores. Drug release behavior was assessed, in vitro, under simulating conditions in term of pH and time to in vivo during their transit to the colon. Negligible drug release occurred during first 5 hr where the coated tablets were in the stomach and small intestine. After that, the pectinolytic enzymes were added into the pH 6.8 medium to simulate the in vivo condition where there is the digestion of bacteria in the colon. The release of 5-ASA from the coated tablets occurred linearly as a function of time. Drug release depended on the composition of the mixed film, as well as the ratio of Eudragit RS to PGA or its salts. The highest drug release from the coated tablets of about 40% was obtained when the ratio of Eudragit RS to potassium salt of PGA was 2.5 to 1. Drug release profiles seemed to conform to the mechanism involving the osmotically driven release and formation of channels in the film caused by dissolution of PGA salts. Channel formation was, in most cases, activated by the presence of pectinolytic enzymes, showing that the PGA in the mixed film was subjected to enzymic breakdown. In conclusion, PGA could be used as an additive in Eudragit RS films to control the release of colonic delivery system.

Advanced technologies for assessment of polymer swelling and erosion behaviors in pharmaceutical aspect.

Clearly understanding of swelling kinetics and erosion behavior of polymer can reveal drug release mechanism and kinetics. Recently, swelling progression and mobility of water molecule inside polymers have been investigated by several technologies, including magnetic resonance imaging (MRI), X-ray microtomography (XμT), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), fluorescent, texture analyzer, and ultrasound techniques. Each technique offers its own advantages which suit to different study purposes. This review describes application of the advanced technologies to monitor swelling-erosion behaviors and also compares pros and cons of each technique. This may help the researchers to select the appropriate technique for their polymer.