Juraj Sibik

Low-Bias Terahertz Amplitude Modulator Based on Split-Ring Resonators and Graphene

Split-ring resonators represent the ideal route to achieve optical control of the incident light at THz frequencies. These subwavelength metamaterial elements exhibit broad resonances that can be easily tuned lithographically. We have realized a design based on the interplay between the resonances of metallic split rings and the electronic properties of monolayer graphene integrated in a single device. By varying the major carrier concentration of graphene, an active modulation of the optical intensity was achieved in the frequency range between 2.2 and 3.1 THz, achieving a maximum modulation depth of 18%, with a bias as low as 0.5 V.

Predicting Crystallization of Amorphous Drugs with Terahertz Spectroscopy

There is a controversy about the extent to which the primary and secondary dielectric relaxations influence the crystallization of amorphous organic compounds below the glass transition temperature. Recent studies also point to the importance of fast molecular dynamics on picosecond-to-nanosecond time scales with respect to the glass stability. In the present study we provide terahertz spectroscopy evidence on the crystallization of amorphous naproxen well below its glass transition temperature and confirm the direct role of Johari-Goldstein (JG) secondary relaxation as a facilitator of the crystallization. We determine the onset temperature Tβ above which the JG relaxation contributes to the fast molecular dynamics and analytically quantify the level of this contribution. We then show there is a strong correlation between the increase in the fast molecular dynamics and onset of crystallization in several chosen amorphous drugs. We believe that this technique has immediate applications to quantify the stability of amorphous drug materials.

Crystallization and Phase Changes in Paracetamol from the Amorphous Solid to the Liquid Phase

For the case of paracetamol, we show how terahertz time-domain spectroscopy can be used to characterize the solid and liquid phase dynamics. Heating of supercooled amorphous paracetamol from 295 K in a covered sample under vacuum leads to its crystallization at 330 K. First, form III is formed followed by the transformation of form III to form II at 375 K, to form I at 405 K, and finally melting is observed around 455 K. We discuss the difference between the featureless spectra of the supercooled liquid and its liquid melt. Lastly, we studied the onset of crystallization from the supercooled liquid in detail and quantified its kinetics based on the Avrami–Erofeev model. We determined an effective rate constant of k = 0.056 min–1 with a corresponding onset of crystallization at T = 329.5 K for a heating rate of 0.4 K min–1.

The Disintegration Process in Microcrystalline Cellulose Based Tablets, Part 1: Influence of Temperature, Porosity and Superdisintegrants

Disintegration performance was measured by analysing both water ingress and tablet swelling of pure microcrystalline cellulose (MCC) and in mixture with croscarmellose sodium using terahertz pulsed imaging (TPI). Tablets made from pure MCC with porosities of 10% and 15% showed similar swelling and transport kinetics: within the first 15s, tablets had swollen by up to 33% of their original thickness and water had fully penetrated the tablet following Darcy flow kinetics. In contrast, MCC tablets with a porosity of 5% exhibited much slower transport kinetics, with swelling to only 17% of their original thickness and full water penetration reached after 100s, dominated by case II transport kinetics. The effect of adding superdisintegrant to the formulation and varying the temperature of the dissolution medium between 20°C and 37°C on the swelling and transport process was quantified. We have demonstrated that TPI can be used to non-invasively analyse the complex disintegration kinetics of formulations that take place on timescales of seconds and is a promising tool to better understand the effect of dosage form microstructure on its performance. By relating immediate-release formulations to mathematical models used to describe controlled release formulations, it becomes possible to use this data for formulation design.

Direct Measurement of Molecular Mobility and Crystallisation of Amorphous Pharmaceuticals using Terahertz Spectroscopy

Despite much effort in the area, no comprehensive understanding of the formation and behaviour of amorphous solids has yet been achieved. This severely limits the industrial application of such materials, including drug delivery where, in principle, amorphous solids have demonstrated their great usefulness in increasing the bioavailability of poorly aqueous soluble active pharmaceutical ingredients. Terahertz time-domain spectroscopy is a relatively novel analytical technique that can be used to measure the fast molecular dynamics of molecules with high accuracy in a non-contact and non-destructive fashion. Over the past decade a number of applications for the characterisation of amorphous drug molecules and formulations have been developed and it has been demonstrated how this technique can be used to determine the onset and strength in molecular mobility that underpins the crystallisation of amorphous drugs. In this review we provide an overview of the history, fundamentals and future perspective of pharmaceutical applications related to the terahertz dynamics of amorphous systems.

High-birefringence nematic liquid crystal for broadband THz applications

ABSTRACT Liquid crystals (LCs) have been studied extensively in the visible range for their dielectric tunability, and the characterisation in the terahertz (THz) range has gained increasing interest due to the need for active THz modulation and switching devices. In this paper, we use THz time-domain spectroscopy to measure the frequency-dependent birefringence and the absorption coefficient of a number of commercial and non-commercial nematic LCs, including E7, BL037, MDA-98-1602, LCMS-107, GT3-23001 and 1825, over a range of bias voltages at room temperature. Furthermore, several basic components of LC mixture are analysed to establish their contributions to birefringence and theoretical model is used to fit the absorption spectra. The large tunability and low loss measured for a range of samples show that the LCs are useful tunable dielectrics for compact, efficient and broadband THz devices. GRAPHICAL ABSTRACT

Intrinsic terahertz plasmon signatures in chemical vapour deposited graphene

Plasmonic resonance at terahertz (THz) frequencies can be achieved by gating graphene grown via chemical vapour deposition (CVD) to a high carrier concentration. THz time domain spectroscopy of such gated monolayer graphene shows resonance features around 1.6 THz, which appear as absorption peaks when the graphene is electrostatically p-doped and change to enhanced transmission when the graphene is n-doped. Superimposed on the Drude-like frequency response of graphene, these resonance features are related to the inherent poly-crystallinity of CVD graphene. An understanding of these features is necessary for the development of future THz optical elements based on CVD graphene.

Terahertz optical modulator based on metamaterial split-ring resonators and graphene

Abstract. The integration of quantum cascade lasers with devices capable of efficiently manipulating terahertz light represents a fundamental step for many different applications. Split-ring resonators, subwavelength metamaterial elements exhibiting broad resonances that are easily tuned lithographically, represent the ideal route to achieve such optical control of the incident light. We have realized a design based on the interplay between metallic split rings and the electronic properties of a graphene monolayer integrated into a single device. By acting on the doping level of graphene, an active modulation of the optical intensity was achieved in the frequency range between 2.2 and 3.1 THz, with a maximum modulation depth of 18%.

19F NMR Spectroscopy as a Highly Sensitive Method for the Direct Monitoring of Confined Crystallization within Nanoporous Materials

The introduction of fluorine into the structure of pharmaceuticals has been an effective strategy for tuning their pharmacodynamic properties, with more than 40 new drugs entering the market in the last 15 years. In this context, (19) F NMR spectroscopy can be viewed as a useful method for investigating the host-guest chemistry of pharmaceuticals in nanosized drug-delivery systems. Although the interest in confined crystallization, nanosized devices, and porous catalysts is gradually increasing, understanding of the complex phase behavior of organic molecules confined within nanochambers or nanoreactors is still lacking. Using (19) F magic-angle-spinning NMR spectroscopy, we obtained detailed mechanistic insight into the crystallization of flufenamic acid (FFA) in a confined environment of mesoporous silica materials with different pore diameters (3.2-29 nm), providing direct experimental evidence for the formation of a molecular-liquid-like layer besides crystalline confined FFA form I.

Measuring the Elasticity of Poly-l-Proline Helices with Terahertz Spectroscopy.

Abstract The rigidity of poly‐l‐proline is an important contributor to the stability of many protein secondary structures, where it has been shown to strongly influence bulk flexibility. The experimental Youngs moduli of two known poly‐l‐proline helical forms, right‐handed all‐cis (Form I) and left‐handed all‐trans (Form II), were determined in the crystalline state by using an approach that combines terahertz time‐domain spectroscopy, X‐ray diffraction, and solid‐state density functional theory. Contrary to expectations, the helices were found to be considerably less rigid than many other natural and synthetic polymers, as well as differing greatly from each other, with Youngs moduli of 4.9 and 9.6 GPa for Forms I and II, respectively.