Justin Ryan

Influence of stent configuration on cerebral aneurysm fluid dynamics

Embolic coiling is the most popular endovascular treatment available for cerebral aneurysms. Nevertheless, the embolic coiling of wide-neck aneurysms is challenging and, in many cases, ineffective. Use of highly porous stents to support coiling of wide-neck aneurysms has become a common procedure in recent years. Several studies have also demonstrated that high porosity stents alone can significantly alter aneurysmal hemodynamics, but differences among different stent configurations have not been fully characterized. As a result, it is usually unclear which stent configuration is optimal for treatment. In this paper, we present a flow study that elucidates the influence of stent configuration on cerebral aneurysm fluid dynamics in an idealized wide-neck basilar tip aneurysm model. Aneurysmal fluid dynamics for three different stent configurations (half-Y, Y and, cross-bar) were first quantified using particle image velocimetry and then compared. Computational fluid dynamics (CFD) simulations were also conducted for selected stent configurations to facilitate validation and provide more detailed characterizations of the fluid dynamics promoted by different stent configurations. In vitro results showed that the Y stent configuration reduced cross-neck flow most significantly, while the cross-bar configuration reduced velocity magnitudes within the aneurysmal sac most significantly. The half-Y configuration led to increased velocity magnitudes within the aneurysmal sac at high parent-vessel flow rates. Experimental results were in strong agreement with CFD simulations. Simulated results indicated that differences in fluid dynamic performance among the different stent configurations can be attributed primarily to protruding struts within the bifurcation region.

Flow diverter effect on cerebral aneurysm hemodynamics: an in vitro comparison of telescoping stents and the Pipeline

IntroductionFlow diverting devices and stents can be used to treat cerebral aneurysms too difficult to treat with coiling or craniotomy and clipping. However, the hemodynamic effects of these devices have not been studied in depth. The objective of this study was to quantify and understand the fluid dynamic changes that occur within bifurcating aneurysms when treated with different devices and configurations.MethodsTwo physical models of bifurcating cerebral aneurysms were constructed: an idealized model and a patient-specific model. The models were treated with four device configurations: a single low-porosity Pipeline embolization device (PED) and one, two, and three high-porosity Enterprise stents deployed in a telescoping fashion. Particle image velocimetry was used to measure the fluid dynamics within the aneurysms; pressure was measured within the patient-specific model.ResultsThe PED resulted in the greatest reductions in fluid dynamic activity within the aneurysm for both models. However, a configuration of three telescoping stents reduced the fluid dynamic activity within the aneurysm similarly to the PED treatment. Pressure within the patient-specific aneurysm did not show significant changes among the treatment configurations; however, the pressure difference across the untreated vessel side of the model was greatest with the PED.ConclusionTreatment with stents and a flow diverter led to reductions in aneurysmal fluid dynamic activity for both idealized and patient-specific models. While the PED resulted in the greatest flow reductions, telescoping high-porosity stents performed similarly and may represent a viable treatment alternative in situations where the use of a PED is not an option.

A novel approach to neonatal management of tetralogy of Fallot, with pulmonary atresia, and multiple aortopulmonary collaterals.

Tetralogy of Fallot (TOF), pulmonary atresia (PA), and multiple aortopulmonary collateral arteries (MAPCAs) need complex interventions, and pre-natal diagnosis allows for appropriate peri-partum planning [(1)][1]. Traditionally the post-natal echocardiogram is followed by cardiac catheterization to

Cerebral Aneurysm Clipping Surgery Simulation Using Patient-Specific 3D Printing and Silicone Casting.

BACKGROUND Neurosurgery simulator development is growing as practitioners recognize the need for improved instructional and rehearsal platforms to improve procedural skills and patient care. In addition, changes in practice patterns have decreased the volume of specific cases, such as aneurysm clippings, which reduces the opportunity for operating room experience. OBJECTIVE The authors developed a hands-on, dimensionally accurate model for aneurysm clipping using patient-derived anatomic data and three-dimensional (3D) printing. Design of the model focused on reproducibility as well as adaptability to new patient geometry. METHODS A modular, reproducible, and patient-derived medical simulacrum was developed for medical learners to practice aneurysmal clipping procedures. Various forms of 3D printing were used to develop a geometrically accurate cranium and vascular tree featuring 9 patient-derived aneurysms. 3D printing in conjunction with elastomeric casting was leveraged to achieve a patient-derived brain model with tactile properties not yet available from commercial 3D printing technology. An educational pilot study was performed to gauge simulation efficacy. RESULTS Through the novel manufacturing process, a patient-derived simulacrum was developed for neurovascular surgical simulation. A follow-up qualitative study suggests potential to enhance current educational programs; assessments support the efficacy of the simulacrum. CONCLUSIONS The proposed aneurysm clipping simulator has the potential to improve learning experiences in surgical environment. 3D printing and elastomeric casting can produce patient-derived models for a dynamic learning environment that add value to surgical training and preparation.

Ventriculostomy Simulation Using Patient-Specific Ventricular Anatomy, 3D Printing, and Hydrogel Casting

BACKGROUND Educational simulators provide a means for students and experts to learn and refine surgical skills. Educators can leverage the strengths of medical simulators to effectively teach complex and high-risk surgical procedures, such as placement of an external ventricular drain. OBJECTIVE Our objective was to develop a cost-effective, patient-derived medical simulacrum for cerebral lateral ventriculostomy. METHODS A cost-effective, patient-derived medical simulacrum was developed for placement of an external lateral ventriculostomy. Elastomeric and gel casting techniques were used to achieve realistic brain geometry and material properties. 3D printing technology was leveraged to develop accurate cranial properties and dimensions. An economical, gravity-driven pump was developed to provide normal and abnormal ventricular pressures. A small pilot study was performed to gauge simulation efficacy using a technology acceptance model. RESULTS An accurate geometric representation of the brain was developed with independent lateral cerebral ventricular chambers. A gravity-driven pump pressurized the ventricular cavities to physiologic values. A qualitative study illustrated that the simulation has potential as an educational tool to train medical professionals in the ventriculostomy procedure. CONCLUSION The ventricular simulacrum can improve learning in a medical education environment. Rapid prototyping and multi-material casting techniques can produce patient-derived models for cost-effective and realistic surgical training scenarios.

Total artificial heart in the pediatric patient with biventricular heart failure.

Mechanical circulatory support emerged for the pediatric population in the late 1980s as a bridge to cardiac transplantation. The Total Artificial Heart (TAH-t) (SynCardia Systems Inc., Tuscon, AZ) has been approved for compassionate use by the Food and Drug Administration for patients with end-stage biventricular heart failure as a bridge to heart transplantation since 1985 and has had FDA approval since 2004. However, of the 1,061 patients placed on the TAH-t, only 21 (2%) were under the age 18. SynCardia Systems, Inc. recommends a minimum patient body surface area (BSA) of 1.7 m2, thus, limiting pediatric application of this device. This unique case report shares this pediatric institution’s first experience with the TAH-t. A 14-year-old male was admitted with dilated cardiomyopathy and severe biventricular heart failure. The patient rapidly decompensated, requiring extracorporeal life support. An echocardiogram revealed severe biventricular dysfunction and diffuse clot formation in the left ventricle and outflow tract. The decision was made to transition to biventricular assist device. The biventricular failure and clot formation helped guide the team to the TAH-t, in spite of a BSA (1.5 m2) below the recommendation of 1.7m2. A computed tomography (CT) scan of the thorax, in conjunction with a novel three-dimensional (3D) modeling system and team, assisted in determining appropriate fit. Chest CT and 3D modeling following implantation were utilized to determine all major vascular structures were unobstructed and the bronchi were open. The virtual 3D model confirmed appropriate device fit with no evidence of compression to the left pulmonary veins. The postoperative course was complicated by a left lung opacification. The left lung anomalies proved to be atelectasis and improved with aggressive recruitment maneuvers. The patient was supported for 11 days prior to transplantation. Chest CT and 3D modeling were crucial in assessing whether the device would fit, as well as postoperative complications in this smaller pediatric patient.

Color-coded patient-specific physical models of congenital heart disease

Purpose – The purpose of this study was to develop and apply new physical heart defect models (PHDMs) that are patient-specific and color-coded with an optimized map. Design/methodology/approach – Heart defect anatomies were segmented from medical images and reconstructed to form virtual models, which were then color-coded and rapid prototyped. The resulting PHDMs were used in a medical educational study to evaluate their pedagogical efficacy and in clinical case studies to investigate their utility in surgical planning. Findings – A growing library of 36 PHDMs (including the most common defects) was generated. Results from the educational study showed that the PHDMs enabled uniquely effective learning, and the clinical case studies indicated that the models added value as surgical planning aids. Research limitations/implications – The education study involved a limited number of students, so future work should consider a larger sample size. The clinical case studies favored use of the PHDMs in surgical p...

Computational Fluid Dynamics to Evaluate the Management of a Giant Internal Carotid Artery Aneurysm

BACKGROUND Giant intracranial aneurysms are rare lesions that present uniquely complex therapeutic challenges. Computational fluid dynamics (CFD) has been used to simulate the hemodynamic environments of developing and ruptured cerebral aneurysms. In this study, we use CFD to examine retrospectively hemodynamic changes during the complicated clinical course of a giant carotid aneurysm. OBJECTIVE To take an innovative, CFD-based approach to retrospective analysis of the surgical management and clinical course of a giant carotid aneurysm. METHODS Pre- and posttreatment image data were first segmented to produce computational aneurysm models. Flow within the models was then simulated using CFD. Simulated flow and wall shear stress (WSS) profiles were analyzed and used to examine hemodynamic changes during the clinical course of the patient, after 2 independent treatments. RESULTS Greater WSS magnitudes and a more localized flow impingement region were observed at the distal portion of the aneurysm after both clinical interventions. These relative, acute changes in hemodynamic features at the distal aneurysm wall were greatest after the second intervention and may have preceded rupture of the aneurysm in that region. CONCLUSIONS The application of CFD to the management of a giant intracranial aneurysm showed unexpected posttreatment changes in flow and WSS profiles. The simulation results offer a viable explanation for the observed clinical course. This study demonstrates potential for the use of CFD preoperatively for decision-making in the surgical and endovascular management of intracranial aneurysms.

Hemodynamic Characterization of Geometric Cerebral Aneurysm Templates Treated With Embolic Coils

Embolic coiling is one of the most effective treatments for cerebral aneurysms (CAs), largely due to the hemodynamic modifications that the treatment effects in the aneurysmal environment. However, coiling can have very different hemodynamic outcomes in aneurysms with different geometries. Previous work in the field of biofluid mechanics has demonstrated on a general level that geometry is a driving factor behind aneurysmal hemodynamics. The goal of this study was to relate two specific geometric factors that describe CAs (i.e., dome size (DS) and parent-vessel contact-angle (PV-CA)) and one factor that describes treatment (i.e., coil packing density (PD)) to three clinically relevant hemodynamic responses (i.e., aneurysmal root-mean-square velocity (Vrms), aneurysmal wall shear stress (WSS), and cross-neck flow (CNF)). Idealized models of basilar tip aneurysms were created in both virtual and physical forms to satisfy two-level multifactorial experimental designs. Steady and pulsatile flow hemodynamics were then evaluated in the virtual models using computational fluid dynamics (CFD) (before and after virtual treatment with finite element (FE) embolic coil models), and hemodynamics were also evaluated in the physical models using particle image velocimetry (PIV) (before and after treatment with actual embolic coils). Results showed that among the factors considered, PD made the greatest contributions to effects on hemodynamic responses in and around the aneurysmal sac (i.e., Vrms and WSS), while DS made the greatest contributions to effects on hemodynamics at the neck (i.e., CNF). Results also showed that while a geometric factor (e.g., PV-CA) may play a relatively minor role in dictating hemodynamics in the untreated case, the same factor can play a much greater role after coiling. We consider the significance of these findings in the context of aneurysmal recurrence and rupture, and explore potential roles for the proposed methods in endovascular treatment planning.

Comparison Among Different High Porosity Stent Configurations: Hemodynamic Effects of Treatment in a Large Cerebral Aneurysm

Whether treated surgically or with endovascular techniques, large and giant cerebral aneurysms are particularly difficult to treat. Nevertheless, high porosity stents can be used to accomplish stent-assisted coiling and even standalone stent-based treatments that have been shown to improve the occlusion of such aneurysms. Further, stent assisted coiling can reduce the incidence of complications that sometimes result from embolic coiling (e.g., neck remnants and thromboembolism). However, in treating cerebral aneurysms at bifurcation termini, it remains unclear which configuration of high porosity stents will result in the most advantageous hemodynamic environment. The goal of this study was to compare how three different stent configurations affected fluid dynamics in a large patient-specific aneurysm model. Three common stent configurations were deployed into the model: a half-Y, a full-Y, and a crossbar configuration. Particle image velocimetry was used to examine post-treatment flow patterns and quantify root-mean-squared velocity magnitude (VRMS) within the aneurysmal sac. While each configuration did reduce VRMS within the aneurysm, the full-Y configuration resulted in the greatest reduction across all flow conditions (an average of 56% with respect to the untreated case). The experimental results agreed well with clinical follow up after treatment with the full-Y configuration; there was evidence of thrombosis within the sac from the stents alone before coil embolization was performed. A computational simulation of the full-Y configuration aligned well with the experimental and in vivo findings, indicating potential for clinically useful prediction of post-treatment hemodynamics. This study found that applying different stent configurations resulted in considerably different fluid dynamics in an anatomically accurate aneurysm model and that the full-Y configuration performed best. The study indicates that knowledge of how stent configurations will affect post-treatment hemodynamics could be important in interventional planning and demonstrates the capability for such planning based on novel computational tools.