Justus Masa

Co@Co3O4 Encapsulated in Carbon Nanotube‐Grafted Nitrogen‐Doped Carbon Polyhedra as an Advanced Bifunctional Oxygen Electrode

Efficient reversible oxygen electrodes for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are vitally important for various energy conversion devices, such as regenerative fuel cells and metal-air batteries. However, realization of such electrodes is impeded by insufficient activity and instability of electrocatalysts for both water splitting and oxygen reduction. We report highly active bifunctional electrocatalysts for oxygen electrodes comprising core-shell Co@Co3O4 nanoparticles embedded in CNT-grafted N-doped carbon-polyhedra obtained by the pyrolysis of cobalt metal-organic framework (ZIF-67) in a reductive H2 atmosphere and subsequent controlled oxidative calcination. The catalysts afford 0.85 V reversible overvoltage in 0.1 m KOH, surpassing Pt/C, IrO2 , and RuO2 and thus ranking them among one of the best non-precious-metal electrocatalysts for reversible oxygen electrodes.

MnxOy/NC and CoxOy/NC Nanoparticles Embedded in a Nitrogen-Doped Carbon Matrix for High-Performance Bifunctional Oxygen Electrodes†

Reversible interconversion of water into H2 and O2, and the recombination of H2 and O2 to H2O thereby harnessing the energy of the reaction provides a completely green cycle for sustainable energy conversion and storage. The realization of this goal is however hampered by the lack of efficient catalysts for water splitting and oxygen reduction. We report exceptionally active bifunctional catalysts for oxygen electrodes comprising Mn3O4 and Co3O4 nanoparticles embedded in nitrogen-doped carbon, obtained by selective pyrolysis and subsequent mild calcination of manganese and cobalt N4 macrocyclic complexes. Intimate interaction was observed between the metals and nitrogen suggesting residual M-N(x) coordination in the catalysts. The catalysts afford remarkably lower reversible overpotentials in KOH (0.1 M) than those for RuO2, IrO2, Pt, NiO, Mn3O4, and Co3O4, thus placing them among the best non-precious-metal catalysts for reversible oxygen electrodes reported to date.

On the Role of Metals in Nitrogen-Doped Carbon Electrocatalysts for Oxygen Reduction

The notion of metal-free catalysts is used to refer to carbon materials modified with nonmetallic elements. However, some claimed metal-free catalysts are prepared using metal-containing precursors. It is highly contested that metal residues in nitrogen-doped carbon (NC) catalysts play a crucial role in the oxygen reduction reaction (ORR). In an attempt to reconcile divergent views, a definition for truly metal-free catalysts is proposed and the differences between NC and M-Nx /C catalysts are discussed. Metal impurities at levels usually undetectable by techniques such as XPS, XRD, and EDX significantly promote the ORR. Poisoning tests to mask the metal ions reveal the involvement of metal residues as active sites or as modifiers of the electronic structure of the active sites in NC. The unique merits of both M-Nx /C and NC catalysts are discussed to inspire the development of more advanced nonprecious-metal catalysts for the ORR.

Spinel Mn–Co Oxide in N-Doped Carbon Nanotubes as a Bifunctional Electrocatalyst Synthesized by Oxidative Cutting

The notorious instability of non-precious-metal catalysts for oxygen reduction and evolution is by far the single unresolved impediment for their practical applications. We have designed highly stable and active bifunctional catalysts for reversible oxygen electrodes by oxidative thermal scission, where we concurrently rupture nitrogen-doped carbon nanotubes and oxidize Co and Mn nanoparticles buried inside them to form spinel Mn-Co oxide nanoparticles partially embedded in the nanotubes. Impressively high dual activity for oxygen reduction and evolution is achieved using these catalysts, surpassing those of Pt/C, RuO2, and IrO2 and thus raising the prospect of functional low-cost, non-precious-metal bifunctional catalysts in metal-air batteries and reversible fuel cells, among others, for a sustainable and green energy future.

Koutecky-Levich analysis applied to nanoparticle modified rotating disk electrodes: Electrocatalysis or misinterpretation?

The application of naive Koutecky-Levich analysis to micro- and nano-particle modified rotating disk electrodes of partially covered and non-planar geometry is critically analysed. Assuming strong overlap of the diffusion fields of the particles such that transport to the entire surface is time-independent and one-dimensional, the observed voltammetric response reflects an apparent electrochemical rate constant kappo, equal to the true rate constant ko describing the redox reaction of interest on the surface of the nanoparticles and the ratio, ψ, of the total electroactive surface area to the geometric area of the rotating disk surface. It is demonstrated that Koutecky-Levich analysis is applicable and yields the expected plots of I−1 versus ω−1 where I is the current and ω is the rotation speed but that the values of the electrochemical rate constants inferred are thereof kappo, not ko. Thus, for ψ > 1 apparent electrocatalysis might be naively but wrongly inferred whereas for ψ < 1 the deduced electrochemical rate constant will be less than ko. Moreover, the effect of ψ on the observed rotating disk electrode voltammograms is significant, signalling the need for care in the overly simplistic application of Koutecky-Levich analysis to modified rotating electrodes, as is commonly applied for example in the analysis of possible oxygen reduction catalysts.

Oxygen reduction reaction using N4-metallomacrocyclic catalysts: fundamentals on rational catalyst design

In this review, we describe and discuss the developments in the use of metalloporphyrins and metallophthalocyanines as catalysts for oxygen reduction in aqueous electrolytes. The main goal of most researchers in this field has been to design catalysts which can achieve facile reduction of oxygen by the four-electron transfer pathway at the lowest overpotential possible. With this in mind, the primary objective of this review was to bring to light the research frontiers uncovering important milestones towards the synthesis and design of promising N4-metallomacrocyclic catalysts which accomplish the four-electron reduction of oxygen, and, based on literature, to draw attention to the fundamental requirements for synthesis of improved catalysts operating at low overpotentials. Our emphasis was not to make parallel comparisons between individual classes of N4-metallomacrocyclic complexes with respect to their activity, but rather to focus on the commonalities of the fundamental properties that govern their reactivities and how these may be aptly manipulated to develop better catalysts. Therefore, besides discussion of the progress attained with regard to synthesis and design of catalysts with high selectivity towards four-electron reduction of O2, a major part of the review highlights quantitative structure-activity relationships (QSAR) which govern the activity and stability of these complexes, which when well understood, refined and carefully implemented should constitute a fundamental gateway for rational design of better catalysts.

Highly Concentrated Aqueous Dispersions of Graphene Exfoliated by Sodium Taurodeoxycholate: Dispersion Behavior and Potential Application as a Catalyst Support for the Oxygen‐Reduction Reaction

A high-yielding exfoliation of graphene at high concentrations in aqueous solutions is critical for both fundamental study and future applications. Herein, we demonstrate the formation of stable aqueous dispersions of pristine graphene by using the surfactant sodium taurodeoxycholate under tip sonication at concentrations of up to 7.1 mg mL(-1). TEM showed that about 8% of the graphene flakes consisted of monolayers and 82% of the flakes consisted of less than five layers. The dispersions were stable regardless of freezing (-20 °C) or heat treatment (80 °C) for 24 h. The concentration could be significantly improved to about 12 mg mL(-1) by vacuum-evaporation of the dispersions at ambient temperature. The as-prepared graphene dispersions were readily cast into conductive films and were also processed to prepare Pt/graphene nanocomposites that were used as highly active electrocatalysts for the oxygen-reduction reaction.

Evaluation of Perovskites as Electrocatalysts for the Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is an enabling process for technologies in the area of energy conversion and storage, but its slow kinetics limits its efficiency. We performed an electrochemical evaluation of 14 different perovskites of variable composition and stoichiometry as OER electrocatalysts in alkaline media. We particularly focused on improved methods for a reliable comparison of catalyst activity. From initial electrochemical results we selected the most active samples for further optimization of electrode preparation and testing. An inverted cell configuration facilitated gas bubble detachment and thus minimized blockage of the active surface area. We describe parameters, such as the presence of specific cations, stoichiometry, and conductivity, that are important for obtaining electroactive perovskites for OER. Conductive additives enhanced the current and decreased the apparent overpotential of OER for one of the most active samples (La(0.58)Sr(0.4)Fe(0.8)Co(0.2)O(3)).

Synergistic Effect of Cobalt and Iron in Layered Double Hydroxide Catalysts for the Oxygen Evolution Reaction

Co-based layered double hydroxide (LDH) catalysts with Fe and Al contents in the range of 15 to 45 at % were synthesized by an efficient coprecipitation method. In these catalysts, Fe3+ or Al3+ ions play an essential role as trivalent species to stabilize the LDH structure. The obtained catalysts were characterized by a comprehensive combination of surface- and bulk-sensitive techniques and were evaluated for the oxygen evolution reaction (OER) on rotating disk electrodes. The OER activity decreased upon increasing the Al content for the Co- and Al-based LDH catalysts, whereas a synergistic effect in Co- and Fe-based LDHs was observed, which resulted in an optimal Fe content of 35 at %. This catalyst was spray-coated on Ni foam electrodes and showed very good stability in a flow-through cell with a potential of approximately 1.53 V at 10 mA cm-2 in 1 m KOH for at least 48 h.

Systematic Selection of Metalloporphyrin‐Based Catalysts for Oxygen Reduction by Modulation of the Donor–Acceptor Intermolecular Hardness

Incisive modulation of the intermolecular hardness between metalloporphyrins and O2 can lead to the identification of promising catalysts for oxygen reduction. The dependency of the electrocatalytic reduction of O2 by metalloporphyrins on the nature of the central metal yields a volcano-type curve, which is rationalized to be in accordance with the Sabatier principle by using an approximation of the electrophilicity of the complexes. By using electrochemical and UV/Vis data, the influence of a selection of meso-substituents on the change in the energy for the π→π* excitation of manganese porphyrins was evaluated allowing one to quantitatively correlate the influence of the various ligands on the electrocatalysis of O2 reduction by the complexes. A manganese porphyrin was identified that electrocatalyzes the reduction of oxygen at low overpotentials without generating hydrogen peroxide. The activity of the complex became remarkably enhanced upon its pyrolysis at 650 °C.