Juti Rani Deka

Synthesis, Bifunctionalization, and Remarkable Adsorption Performance of Benzene-Bridged Periodic Mesoporous Organosilicas Functionalized with High Loadings of Carboxylic Acids

Highly ordered benzene-bridged periodic mesoporous organosilicas (PMOs) that were functionalized with exceptionally high loadings of carboxylic acid groups (COOH), up to 80 mol % based on silica, have been synthesized and their use as adsorbents for the adsorption of methylene blue (MB), a basic dye pollutant, and for the loading and release of doxorubicin (DOX), an anticancer drug, is demonstrated. These COOH-functionalized benzene-silicas were synthesized by the co-condensation of 1,4-bis(triethoxysilyl) benzene (BTEB) and carboxyethylsilanetriol sodium salt (CES), an organosilane that contained a carboxylic acid group, in the presence of non-ionic oligomeric surfactant Brij 76 in acidic medium. The materials thus obtained were characterized by a variety of techniques, including powder X-ray diffraction (XRD), nitrogen-adsorption/desorption isotherms, TEM, and (13)C and (29)Si solid-state NMR spectroscopy. Owing to the exceptionally high loadings of COOH groups, their high surface areas, and possible π-π-stacking interactions, these adsorbents have very high adsorption capacities and extremely rapid adsorption rates for MB removal and for the controlled loading/release of DOX, thus manifesting their great potential for environmental and biomedical applications.

Synthesis of highly phosphonic acid functionalized benzene-bridged periodic mesoporous organosilicas for use as efficient dye adsorbents

Periodic mesoporous organosilicas (PMOs) with benzene bridging groups in the silica wall were functionalized with a tunable content of phosphonic acid groups. These bifunctional materials were synthesized by co-condensation of two different organosilane precursors, that is, 1,4-bis(triethoxysilyl)benzene (BTEB) and sodium 3-(trihydroxysilyl)propyl methyl phosphate (SPMP), under acidic conditions using nonionic surfactant Brij-S10 as template. The materials exhibited well-ordered mesostructures and were characterized by X-ray diffraction, nitrogen sorption, TEM, TGA, FTIR, and solid-state NMR measurements. The materials thus obtained were employed as adsorbents to remove different types of dyes, for example, cationic dyes methylene blue and phenosafranine, anionic orange II, and amphoteric rhodamine B, from aqueous solutions. The materials exhibited a remarkably high adsorption capacity than activated carbon due to their ordered mesostructures, a large number of phosphonic acid groups, and high surface areas. The adsorption was mainly governed by electrostatic interaction, but also involved π-π stacking interaction as well as hydrogen bonding. The adsorption kinetics can be better fitted by the pseudo-second order model. The adsorption process was controlled by the mechanisms of external mass transfer and intraparticle diffusion. The materials retained more than 97% dye removal efficiency after use for five consecutive cycles.

A bioconjugated design for amino acid-modified mesoporous silicas as effective adsorbents for toxic chemicals

A general synthetic method for functionalization of mesoporous silica with amino acid has been developed. The carboxylic acid functionalized SBA-15 was conjugated with l-phenylalanine (Phe) and l-tryptophan (Trp) to obtain nontoxic amino acid-conjugated functionalized mesoporous silica materials. The materials were used as adsorbents for the removal of the herbicide Paraquat (PQ) and its analog, ethyl viologen dibromide (EVB) from aqueous solutions. In comparison to the commercially available activated carbon adsorbents, the silica-based adsorbents prepared in this study exhibited relatively higher PQ removal efficiency in aqueous solutions at room temperature and pH 7.0. The silica-based adsorbents, pendant with amino acid moieties exhibited greater adsorption capacities toward PQ and EVB than the analogs but without the amino acid moiety, suggesting that there is a benefit for the enhanced π-π interaction between the aromatic groups of the conjugated amino acid moieties and the adsorbate. This bioconjugated method developed here provides a promising new tool to synthesize new materials for detoxification of herbicides in clinical trials.

Ethane-Bridged Periodic Mesoporous Organosilicas Functionalized with High Loadings of Carboxylic Acid Groups: Synthesis, Bifunctionalization, and Fabrication of Metal Nanoparticles

Well-ordered periodic mesoporous organosilicas (PMOs) functionalized with high contents of carboxylic acid (COOH) groups, up to 85 mol % based on silica, were synthesized by co-condensation of 1,2-bis(triethoxysilyl)ethane (BTEE) and carboxyethylsilanetriol sodium salt (CES) under acidic conditions by using alkyl poly(oxyethylene) surfactant Brij 76 as a structure-directing agent. A variety of techniques including powder X-ray diffraction (XRD), nitrogen adsorption/desorption, Fourier-transformed infrared (FTIR), transmission electron microscopy (TEM), (13) C- and (29) Si solid-state nuclear magnetic resonance (NMR) were used to characterize the products. The materials thus obtained were used as an effective support to synthesize metal nanoparticles (Ag and Pt) within the channel of 2D hexagonal mesostructure of PMOs. The size and distribution of the nanoparticles were observed to be highly dependent on the interaction between the carboxylic acid functionalized group and the metal precursors. The size of Pt nanoparticles reduced from 3.6 to 2.5 nm and that of Ag nanoparticles reduced from 5.3 to 3.4 nm with the increase in the COOH loading from 10 to 50 %.

Rapid sonochemical synthesis of MCM-41 type benzene-bridged periodic mesoporous organosilicas

Benzene-bridged periodic mesoporous organosilicas (PMOs) with the MCM-41 were synthesized by a rapid sonochemical process via co-condensation of tetraethoxysilane (TEOS) and 1,4-bis(triethoxysilyl) benzene (BTEB) under basic conditions within a few minutes using cetyltrimethylammoniumbromide (CTMABr) as a structure-directing agent. The molar ratio of the silicon precursors and the synthesis time were varied in order to investigate their influence on the structural ordering of the materials. The characteristics of the materials were evaluated by X-ray diffraction (XRD), N2-sorption, transmission electron microscopy (TEM) and solid-state NMR spectroscopy. The resultant materials exhibited well-ordered hexagonal mesostructures with surface areas in the range of 602-1237 m(2)/g, pore volumes of 0.37-0.68 cm(3)/g, and pore diameters in the range of 2.5-3.5 nm. Two dimensional (29)Si{(1)H} heteronuclear correlation (HETCOR) NMR spectra confirmed the formation of a single mesophase with various Q (from TEOS) and T (from BTEB) silicon species located randomly within the pore walls due to the co-condensation of BTEB and TEOS, which excluded the possibility of formation of island or two separate phases within such a short synthesis time. The prime advantage of the present synthesis route is that it can effectively reduce the total synthesis time from days to a few minutes, much shorter than the conventional benzene-bridged PMOs synthesis methods.

Ordered cubic mesoporous silica KIT-5 functionalized with carboxylic acid groups for dye removal

Cubic cage-type KIT-5 mesoporous silica functionalized with carboxylic acid (–COOH) groups, ranging from 0 to 45 mol% based on silica, were synthesized via co-condensation of tetraethyl orthosilicate (TEOS) and carboxyethylsilanetriol sodium salt (CES) in the presence of Pluronic F127 in acidic media. The materials thus obtained were characterized by powder X-ray diffraction, nitrogen sorption, transmission electron microscopy, FTIR, thermogravimetric analysis, acid–base titration, and solid-state NMR measurements. The –COOH functionalized KIT-5 was used to adsorb different types of dyes such as phenosafranine (PF), methylene blue (MB), orange II (OII) and rhodamine B (RhB). The –COOH functionalized KIT-5 materials exhibited excellent adsorption capacities for cationic PF and MB, and amphoteric RhB in comparison to pure silica KIT-5, but the opposite for anionic OII. The adsorption was highly dependent on the electrostatic interaction between the adsorbent and the dye molecules. External mass transfer and intra-particle diffusion collectively control the adsorption process.

pH responsive selective protein adsorption by carboxylic acid functionalized large pore mesoporous silica nanoparticles SBA-1

Cubic mesoporous silica nanoparticles (MSNs) with the SBA-1 moiety, functionalized with carboxylic acid (COOH) groups as well as enlarged mesopores, are successfully synthesized using tetraethyl orthosilicate (TEOS) and carboxyethylsilanetriol sodium salt (CES) as silica sources, complexes formed by polyacrylic acid (PAA) and hexadecylpyridinium chloride (CPC) as templates, and trimethylbenzene (TMB) as pore expander. The successful incorporation of organic functionalities are confirmed by 13C and 29Si solid-state NMR. The structural properties of cubic mesostructures are characterized by powder XRD, N2 adsorption-desorption isotherms, and TEM measurements. The prepared MSNs exhibit a remarkably high adsorption capacity of 1138 mg g-1 at pH 8.2 when they are used as the supports to immobilize papain. Both factors of the large pore size of the support and the favorable electrostatic attractions between the carboxylate groups on the adsorbent surface and the papain molecules play important roles in reaching such a high adsorption capacity. The immobilized papain possesses better thermal stability, pH tolerance, and heat resistance in comparison to the free papain. The materials are also used for selective adsorption of a single protein (papain) from the binary mixture of two different types of proteins (papain and hemoglobin). Our results demonstrate that proteins such as papain and hemoglobin with different isoelectric points and shapes can be effectively separated from their binary mixture by simply tuning the pH of the buffer.