Jwa-Young Kim

In vitro activity of β-lactams in combination with other antimicrobial agents against resistant strains of Pseudomonas aeruginosa

Abstract Using the chequerboard titration method, the activity in combination of β-lactams, fluoroquinolones and aminoglycosides was investigated against 24 Pseudomonas aeruginosa isolates resistant to these antibiotics. Synergy was detected with one or more antimicrobial combinations against 15 of 24 (63%) isolates and partial synergy was detected with one or more combinations against all 24 isolates. No antagonism was seen with any combination. Ceftazidime and cefepime with aztreonam, amikacin and isepamicin showed synergy or partial synergy against 12–20 (50–80%) isolates. Imipenem and meropenem with amikacin and isepamicin showed synergy or partial synergy against eight to 12 (33–50%) isolates. The results of this study indicate that against P. aeruginosa , synergy may occur between β-lactams, fluoroquinolones and aminoglycosides although the strains are resistant to the individual antibiotics.

Accelerated healing with the use of a silk fibroin membrane for the guided bone regeneration technique.

OBJECTIVE The purpose of this study was to evaluate the bone regeneration ability of silk fibroin (SF) membrane. STUDY DESIGN Fourier-transform infrared (FT-IR) and solubility test against distilled water were performed with 3 different types of SF membrane (SM1, SM2, and SM3). Subsequently, microscopic computerized tomography (μ-CT) and histomorphometric analyses were performed in rabbit calvarial defect model after SF membrane application at 4 and 8 weeks after surgery. RESULTS FT-IR showed that the conformation of the SF membrane was a random coil structure and that SM1 was the least soluble. When SM1 was used in the animal model, the groups with SM1 had significantly higher new bone formation than the uncovered control in both the μ-CT and the histomorphometric analyses (P < .05). CONCLUSIONS The SF membrane had more new bone formation compared with the uncovered control.

A combination graft of low-molecular-weight silk fibroin with Choukroun platelet-rich fibrin for rabbit calvarial defect

OBJECTIVE The objective of this study was to determine the capabilities of silk fibroin as a biomaterial template for bone formation when mixed with Choukroun platelet-rich fibrin (PRF) in vivo. STUDY DESIGN Ten New Zealand white rabbits were used for this study and bilateral round shaped defects were formed in the parietal bone (diameter 9.0 mm). The silk fibroin was digested by acid and made into powder (molecular weight <1.0 kDa). The right side (experimental group) received the silk fibroin plus platelet-rich fibroin and the left side (control group) did not receive a graft. Animals were killed at 6 weeks and 12 weeks. The specimens were examined by microscopic computerized tomography (micro-CT). Subsequently, they underwent decalcification and were stained for histologic analysis. RESULTS There was no significant difference between groups at 6 weeks after operation. In the micro-CT results, however, tissue mineral content in the experimental group at 12 weeks after operation was 132.09 +/- 4.41 and that in the control group was 126.42 +/- 6.62 (P = .011). Tissue mineral density in the experimental group was 2,088.88 +/- 648.34, and that in the control group was 2,029.72 +/- 668.22 (P = .013). The results of the histomorphometric analysis were in accordance with the micro-CT results. The total new bone was 49.86 +/- 7.49% in the control group at 12 weeks after the operation and 59.83 +/- 10.92% in the experimental group (P = .021). CONCLUSION A combined application of Choukroun PRF with acid-digested silk fibroin showed more rapid bone healing than unfilled control.

Restoration of a peri-implant defect by platelet-rich fibrin

OBJECTIVE The objective of this study was to evaluate the application of platelet-rich fibrin (PRF) into a peri-implant defect in vivo. STUDY DESIGN Eight New Zealand white rabbits were used for this study. Two peri-implants with defects sized 3.0 × 5.0 mm (width × length) were prepared after drilling to host the dental implant in the tibia. Subsequently, the 2 dental implants were installed (diameter, 3.0 mm and length, 8.0 mm). In the experimental group, PRF was applied into the bony defect. In the control group, the peri-implant defect was left unfilled. The animals were humanely killed 8 weeks after implantation and histomorphometric analysis was done. RESULTS In the histomorphometric analysis, mean new bone formation was 29.30% ± 7.50% in the experimental group and 11.06% ± 8.94% in the control group (P = .020). Mean bone-to-implant contact was 39.43% ± 7.39% in the experimental group and 17.11% ± 8.12% in the control group (P = .006). CONCLUSIONS In the animal model, peri-implant defect sized 3.0 × 5.0 mm (width × length) was successfully repaired by the application of PRF alone.

Reliability and validity of lower extremity computed tomography as a screening tool for osteoporosis

SummaryWe evaluated the correlation between central bone mineral density (BMD) and peripheral bone attenuation using lower extremity computed tomography (CT). A good correlation was found between lower extremity CT and central BMD suggesting that CT is useful for screening osteoporosis, and that peripheral bone attenuation adequately reflects central BMD.IntroductionThis study aimed to evaluate the reliability and validity of CT as a screening tool for osteoporosis and to estimate the correlation between central BMD and peripheral bone attenuation using lower extremity CT.MethodsIn total, 292 patients who underwent a lower extremity, lumbar spine, or abdomen and pelvic CT scan within a 3-month interval of a dual-energy X-ray absorptiometry (DEXA) examination were included. Following reliability testing, bone attenuation of the L1, L2, L3, L4, femoral head, femoral neck, greater trochanter, distal femur, proximal tibia, distal tibia, and talus was measured by placing a circular region of interest on the central part of each bony region on a coronal CT image. Partial correlation was used to assess the correlation between CT and DEXA after adjusting for age and body mass index.ResultsIn terms of reliability, all bone attenuation measurements, except the femoral neck, showed good to excellent interobserver reliability (intraclass correlation coefficients, 0.691–0.941). In terms of validity, bone attenuation of the L1 to L4, femoral neck, and greater trochanter on CT showed significant correlations with BMD of each area on DEXA (correlation coefficients, 0.399–0.613). Bone attenuation of the distal tibia and talus on CT showed significant correlations with BMD of all parts on DEXA (correlation coefficients, 0.493–0.581 for distal tibia, 0.396–0.579 for talus).ConclusionLower extremity CT is a useful screening tool for osteoporosis, and peripheral bone attenuation on lower extremity CT adequately reflects central BMD on DEXA.

Trends in the incidence rate of device-associated infections in intensive care units after the establishment of the Korean Nosocomial Infections Surveillance System

BACKGROUND The effectiveness of continuous nationwide surveillance on healthcare-associated infections should be investigated in each country. AIM To assess the rate of device-associated infections (DAIs) in intensive care units (ICUs) since the establishment of the Korean Nosocomial Infections Surveillance System (KONIS). METHODS Nationwide data were obtained on the incidence rate of DAI in ICUs reported to KONIS by all participating hospitals. The three major DAIs were studied: ventilator-associated pneumonia (VAP), central line-associated bloodstream infection (CABSI), and catheter-associated urinary tract infection (CAUTI). The pooled and year-wise incidence rates (cases per 1000 device-days) of these DAIs were determined for the period 2006 and 2012. In addition, data from institutions that had participated in KONIS for at least three consecutive years were analysed separately. FINDINGS The number of ICUs participating in KONIS gradually increased from 76 in 2006 to 162 in 2012. Between 2006 and 2012, the incidence rate per 1000 device-days for VAP decreased significantly from 3.48 to 1.64 (F = 11, P < 0.01), for CAUTI the rate decreased non-significantly from 1.85 to 1.26 (F = 2.02, P = 0.07), and for CABSI the rate also decreased non-significantly from 3.4 to 2.57 (F = 1.73, P = 0.12). In the 132 ICUs that had participated in KONIS for at least three consecutive years, the VAP rate significantly decreased from the first year to third year (F = 20.57, P < 0.01), but the rates of CAUTI (F = 1.06, P = 0.35) and CABSI (F = 1.39, P = 0.25) did not change significantly. CONCLUSION The decreased incidence rate of VAP in ICUs in Korea might be associated with the continuous prospective surveillance provided by KONIS.

Trends in the distribution and antimicrobial susceptibility of causative pathogens of device-associated infection in Korean intensive care units from 2006 to 2013: results from the Korean Nosocomial Infections Surveillance System (KONIS).

BACKGROUND For all countries, information on pathogens causing healthcare-associated infections is important in order to develop proper strategies for preventing and treating nosocomial infections. AIM To assess the change in frequencies and antimicrobial resistance of pathogens causing device-associated infections (DAIs) in intensive care units (ICUs) in South Korea between July 2006 and June 2014. METHODS Data from the Korean Nosocomial Infections Surveillance System (KONIS) were analysed, including three major DAI types in ICUs. FINDINGS The frequency of Gram-negative bacteria gradually increased for central line-associated bloodstream infection (CLABSI) and ventilator-associated pneumonia (VAP) (from 24.6% to 32.6% and from 52.8% to 73.5%, respectively). By contrast, the frequency of Gram-positive bacteria decreased from 58.6% to 49.2% for CLABSI, and from 44.3% to 23.8% for VAP (P < 0.001). Staphylococcus aureus was the most frequent causative pathogen in CLABSI throughout the surveillance period, but for VAP was replaced as the most frequent pathogen by Acinetobacter baumannii as of 2010. Candida albicans was the most frequent pathogen for catheter-associated urinary tract infection. The meticillin resistance rate in S. aureus decreased from 95% to 90.2% (P < 0.001); amikacin resistance in Klebsiella pneumoniae and Escherichia coli decreased from 43.8% to 14.7% and from 15.0% to 1.8%, respectively (P < 0.001); imipenem resistance in A. baumannii increased from 52.9% to 89.8% (P < 0.001). CONCLUSION The proportion of Gram-negative bacteria as nosocomial pathogens for CLABSI and VAP has increased. The prevalence of A. baumannii causing DAIs in Korean ICUs has increased rapidly, as has the rate of carbapenem resistance in these bacteria.

Effects of installation depth on survival of an hydroxyapatite-coated Bicon implant for single-tooth restoration.

PURPOSE The present retrospective study evaluated various implant surface factors associated with Bicon implant survival for single-tooth restoration in the healthy individual. PATIENTS AND METHODS A retrospective cohort study design was used. A total of 613 Bicon (Bicon System, Boston, MA) implants (272 patients) were included. Because the use of hydroxyapatite (HA) coating has been controversial, the surface type was chosen according to the patients preference. A total of 308 HA-coated implants and 305 titanium plasma-sprayed (TPS) implants were used. The macroanatomy of both implant types was identical. Patients who had systemic disease, poor quality bone, or removable prosthetics were excluded from the present study. A chart review was conducted to record age, gender, implant diameter, implant length, installation depth, installation location, and the use of bone grafting. Implant failure was recorded, and the data were analyzed using the chi(2) test and logistic regression analysis. RESULTS The installation depth was an important prognostic factor in the HA-coated implants. The failure rate for the HA-coated implants installed at margin level and 2 mm below level was 10.29% and 3.01%, respectively (chi(2) = 6.035, P = .014). The implant length was an important prognostic factor for the TPS-treated implants. The failure rate recorded for the TPS-treated implants installed with a length of less than 10 mm and 10 mm or longer was 15.46% and 2.40%, respectively (chi(2) = 18.414, P < .001). CONCLUSION Many factors can influence the failure rate of TPS and HA-coated Bicon implants. Among these, installation depth played an especially significant role in the success of HA-coated Bicon implants in the present study.

Comparable efficacy of silk fibroin with the collagen membranes for guided bone regeneration in rat calvarial defects

PURPOSE Silk fibroin (SF) is a new degradable barrier membrane for guided bone regeneration (GBR) that can reduce the risk of pathogen transmission and the high costs associated with the use of collagen membranes. This study compared the efficacy of SF membranes on GBR with collagen membranes (Bio-Gide®) using a rat calvarial defect model. MATERIALS AND METHODS Thirty-six male Sprague Dawley rats with two 5 mm-sized circular defects in the calvarial bone were prepared (n=72). The study groups were divided into a control group (no membrane) and two experimental groups (SF membrane and Bio-Gide®). Each group of 24 samples was subdivided at 2, 4, and 8 weeks after implantation. New bone formation was evaluated using microcomputerized tomography and histological examination. RESULTS Bone regeneration was observed in the SF and Bio-Gide®-treated groups to a greater extent than in the control group (mean volume of new bone was 5.49 ± 1.48 mm3 at 8 weeks). There were different patterns of bone regeneration between the SF membrane and the Bio-Gide® samples. However, the absolute volume of new bone in the SF membrane-treated group was not significantly different from that in the collagen membrane-treated group at 8 weeks (8.75 ± 0.80 vs. 8.47 ± 0.75 mm3, respectively, P=.592). CONCLUSION SF membranes successfully enhanced comparable volumes of bone regeneration in calvarial bone defects compared with collagen membranes. Considering the lower cost and lesser risk of infectious transmission from animal tissue, SF membranes are a viable alternative to collagen membranes for GBR.

Design and application of hybrid maxillomandibular fixation for facial bone fractures.

Purpose A novel maxillomandibular fixation (MMF) procedure using a skeletal anchorage screw (SAS) (in the maxilla) and an arch bar (in the mandible), which we call “hybrid maxillomandibular fixation,” was explored in this study. The aims of the study were to examine the efficacy of our hybrid MMF method and to compare periodontal tissue health and occlusal rehabilitation among 3 MMF methods. Materials and Methods In total, 112 patients who had undergone open reduction at the Department of Oral and Maxillofacial Surgery between September 2005 and December 2012 were selected for this study. The participants were assigned to one of the following groups: SAS (maxilla), SAS (mandible), SAS-arch bar, or arch bar-arch bar. Periodontal health was evaluated using the Gingival Index, and the perioperative occlusal reproducibility was evaluated using a score of 1 to 3. Statistical analysis was performed using parametric tests (Student t test or 1-way analysis of variance followed by post hoc Tukey test). Results In the Gingival Index comparison performed 1 month after the surgery, only the group using the arch bars and wiring was significantly different from the other groups (P < 0.05). The occlusal reproducibility scores were not significantly different. The pain and discomfort of the patients were reduced in the hybrid MMF group. Conclusions The hybrid MMF takes advantage of MMF using both arch bars and SASs for mandibular fractures. In addition, it overcomes many problems presented by previous MMF methods.