Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by K. Andersen.
Proceedings of SPIE | 2007
P. von Ballmoos; P. Bastie; P. Courtois; N. V. Abrosimov; K. Andersen; T. Buslaps; T. Camus; H. Halloin; M. Jentschel; J. Knödlseder; G. Roudil; Denis Serre; Gerald K. Skinner
The concept of a gamma-ray telescope based on a Laue lens offers the possibility to increase the sensitivity by more than an order of magnitude with respect to existing instruments. Laue lenses have been developed by our collaboration for several years : the main achievement of this R&D program was the CLAIRE lens prototype, which has successfully demonstrated the feasibility of the concept in astrophysical conditions. Since then, the endeavour has been oriented towards the development of efficient diffracting elements (crystal slabs) in order to increase both the effective area and the width of the energy bandpass focused, the aim being to step from a technological Laue lens to a scientifically exploitable lens. The latest mission concept featuring a gamma-ray lens is the European Gamma- Ray Imager (GRI) which intends to make use of the Laue lens to cover energies from 200 keV to 1300 keV. Investigations of two promising materials, low mosaicity copper and gradient concentration silicongermanium are presented in this paper. The measurements have been performed during three runs: 6 + 4 days at the European Synchrotron Radiation Facility (Grenoble, France), on beamline ID15A, using a 500 keV monochromatic beam, and 14 days on the GAMS 4 instrument of the Institute Laue Langevin (Grenoble, France) featuring a highly monochromatic beam of 517 keV. Despite it was not perfectly homogeneous, the presented copper crystal has exhibited peak reflectivity of 25 % in accordance with theoretical predictions, and a mosaicity around 26 arcsec, the ideal range for the realization of a Laue lens such as GRI. Silicon-germanium featuring a constant gradient have been measured for the very first time at 500 keV. Two samples showed a quite homogeneous reflectivity reaching 26%, which is far from the 48 % already observed in experimental crystals but a very encouraging beginning. The measured results have been used to estimate the performance of the GRI Laue lens design.
Proceedings of SPIE | 2007
Filippo Frontera; G. Loffredo; Alessandro Pisa; L. Milani; F. Nobili; N. Auricchio; V. Carassiti; F. Evangelisti; L. Landi; S. Squerzanti; K. Andersen; P. Courtois; L. Amati; E. Caroli; Gianni Landini; S. Silvestri; J. B. Stephen; J. M. Poulsen; B. Negri; Giovanni Pareschi
We report the status of the HAXTEL project, devoted to perform a design study and the development of a Laue lens prototype. After a summary of the major results of the design study, the approach adopted to develop a Demonstration Model of a Laue lens is discussed, the set up described, and some results presented.
Proceedings of SPIE | 2005
Alessandro Pisa; Filippo Frontera; Paola De Chiara; G. Loffredo; Damiano Pellicciotta; V. Carassiti; F. Evangelisti; K. Andersen; P. Courtois; Bernard Hamelin; L. Amati; Gianni Landini; S. Silvestri
A Laue lens for focusing X-ray photons with energies above 60 keV for astrophysical applications is being developed. The lens is based on mosaic crystals of Cu (111) produced at the Institute Laue-Langevin. A feasibility study has allowed to establish lens geometry and crystal properties required. The test of the crystals has provided very satisfactory results. We are now developing a Demonstration Model (DM) of the lens in order to establish the best assembling technique of the crystals. We will discuss the status of the project and its prospects.
Astronomical Telescopes and Instrumentation | 2006
P. Von Ballmoos; P. Bastie; P. Courtois; N. V. Abrosimov; K. Andersen; H. Halloin; G. K. Skinner; Robert K. Smither
A Laue lens gamma-ray telescope represents an exciting concept for a future high-energy mission. The feasibility of such a lens has been demonstrated by the CLAIRE lens prototype; since then various mission concepts featuring a Laue lens are being developed. The latest, which is also the most ambitious, is the European Gamma-Ray Imager (GRI). However, advancing from the CLAIRE prototype to a scientifically exploitable Laue lens requires still substantial research and development. First and foremost, diffracting elements (crystals) that constitute the Laue lens have to be optimized to offer the best efficiency and imaging capabilities for the resulting telescope. The characteristics of selected candidate crystals were measured at the European Synchrotron Radiation Facility on the high-energy beamline ID 15A using a beam tuned at 292 keV. The studied low mosaicity copper crystals have shown absolute reflectivity reaching 30%. These crystals are promising for the realization of a Laue lens, despite the fact that they produce a diffracted beam featuring a Gaussian intensity profile, which contributes to the spread of the focal spot. A composition gradient Si1-x-Gex crystal has been investigated as well, which showed a diffraction efficiency reaching 50% (disregarding absorption) - half of the theoretical maximum - that represents an absolute reflectivity around 39 %, the best that we measured at this energy to date. This gradient crystal also showed a square-shaped rocking curve that is almost the best case to minimize the spread of the focal spot. We also show that bending a gradient crystal could still enhance the focusing. Thanks to the better focusing, a factor of 2 in sensitivity improvement may be achieved.
Proceedings of SPIE | 2009
F. Ferrari; Filippo Frontera; G. Loffredo; Enrico Virgilli; C. Guidorzi; V. Carassiti; F. Evangelisti; L. Landi; S. Chiozzi; S. Squerzanti; E. Caroli; J. B. Stephen; F. Schiavone; A. Basili; K. Andersen; P. Courtois
We report on new results on the development activity of broad band Laue lenses for hard X-/gamma-ray astronomy (70/100-600 keV). After the development of a first prototype, whose performance was presented at the SPIE conference on Astronomical Telescopes held last year in Marseille (Frontera et al. 2008), we have improved the lens assembling technology. We present the the development status of the new lens prototype that is on the way to be assembled.
Proceedings of SPIE | 2006
F. Frontera; Alessandro Pisa; V. Carassiti; F. Evangelisti; G. Loffredo; Damiano Pellicciotta; K. Andersen; P. Courtois; L. Amati; E. Caroli; T. Franceschini; Gianni Landini; S. Silvestri; J. B. Stephen
A breakthrough in the sensitivity level of the hard X-/gamma-ray telescopes, which today are based on detectors that view the sky through (or not) coded masks, is expected when focusing optics will be available also in this energy range. Focusing techniques are now in an advanced stage of development. To date the most efficient technique to focus hard X-rays with energies above 100 keV appears to be the Bragg diffraction from crystals in transmission configuration (Laue lenses). Crystals with mosaic structure appear to be the most suitable to build a Laue lens with a broad passband, even though other alternative structures are being investigated. The goal of our project is the development of a broad band focusing telescope based on gamma-ray lenses for the study of the continuum emission of celestial sources from 60 keV up to >600 keV. We will report details of our project, its development status and results of our assessment study of a lens configuration for the European Gamma Ray Imager (GRI) mission now under study for the ESA plan Cosmic Vision 2015-2025.
arXiv: Astrophysics | 2004
Alessandro Pisa; Filippo Frontera; Paola De Chiara; G. Loffredo; Damiano Pellicciotta; Gianni Landini; S. Silvestri; K. Andersen; P. Courtois; Bernard Hamelin
We report on the feasibility study of a Laue lens for hard X-rays (> 60 keV) based on mosaic crystals, for astrophysical applications. In particular we discuss the scientific motivations, its functioning principle, the procedure followed to select the suitable crystal materials, the criteria adopted to establish crystal dimensions and their distribution on the lens in order to obtain the best lens focusing capabilities, and the criteria for optimizing the lens effective area in a given passband. We also discuss the effects of misalignments of the crystal tiles due to unavoidable mechanical errors in assembling the lens. A software was developed to face all these topics and to evaluate the expected lens performance.
Experimental Astronomy | 2006
P. Courtois; K. Andersen; Pierre Bastie
Experimental Astronomy | 2006
P. von Ballmoos; H. Halloin; N. V. Abrosimov; Jesus Alvarez; K. Andersen; P. Bastie; Steven E. Boggs; P. Courtois; Thierry J.-L. Courvoisier; M. J. Harris; M. Hernanz; J. Isern; P. Jean; J. Knödlseder; G. K. Skinner; B. Smither; P. Ubertini; G. Vedrenne; Georg Weidenspointner; C. Wunderer
Experimental Astronomy | 2006
F. Frontera; Alessandro Pisa; G. Loffredo; Damiano Pellicciotta; V. Carassiti; F. Evangelisti; K. Andersen; P. Courtois; L. Amati; E. Caroli; T. Franceschini; Gianni Landini; S. Silvestri; J. B. Stephen