K. Izumi

Measurements of cosmic-ray low-energy antiproton and proton spectra in a transient period of solar field reversal.

The energy spectra of cosmic-ray low-energy antiprotons ( *ps) and protons ( ps) have been measured by BESS in 1999 and 2000, during a period covering reversal at the solar magnetic field. Based on these measurements, a sudden increase of the *p/p flux ratio following the solar magnetic field reversal was observed, and it generally agrees with a drift model of the solar modulation.

Precise measurements of atmospheric muon fluxes with the BESS spectrometer

The vertical absolute fluxes of atmospheric muons and muon charge ratio have been measured precisely at different geomagnetic locations by using the BESS spectrometer. The observations had been performed at sea level (30 m above sea level) in Tsukuba, Japan, and at 360 m above sea level in Lynn Lake, Canada. The vertical cutoff rigidities in Tsukuba (36.2°N, 140.1°E) and in Lynn Lake (56.5°N, 101.0°W) are 11.4 and 0.4 GV, respectively. We have obtained vertical fluxes of positive and negative muons in a momentum range from 0.6 to 20 GeV/c with systematic errors <3% in both measurements. By comparing the data collected at two different geomagnetic latitudes, we have seen an effect of cutoff rigidity. The dependence on the atmospheric pressure and temperature, and the solar modulation effect have been also clearly observed. We also clearly observed the decrease of charge ratio of muons at low momentum side with at higher cutoff rigidity region.

Observation of Parametric Instability in Advanced LIGO

Parametric instabilities have long been studied as a potentially limiting effect in high-power interferometric gravitational wave detectors. Until now, however, these instabilities have never been observed in a kilometer-scale interferometer. In this Letter, we describe the first observation of parametric instability in a gravitational wave detector, and the means by which it has been removed as a barrier to progress.

Status of Japanese gravitational wave detectors

The Large-scale Cryogenic Gravitational wave Telescope (LCGT) is planned as a future Japanese project for gravitational wave detection. A 3 km interferometer will be built in an underground mine at Kamioka. Cryogenic sapphire mirrors are going to be employed for the test masses. For the demonstration of LCGT technologies, two prototype interferometers, TAMA300 and CLIO, are being developed. This paper describes the current status of the LCGT project and the two prototype interferometers.

Bess and its future prospect for polar long duration flights

Abstract The Balloon-borne Experiment with a Superconducting Spectrometer, BESS, aims to study elementary particle/antiparticle phenomena in the early history of the Universe. The instrument has a unique feature of a thin superconducting solenoid magnet enabling a large geometrical acceptance with a horizontally cylindrical configuration. Seven balloon flights have been successfully carried out since 1993. More than 10 3 comic-ray antiproton have been unambiguously detected, and the energy spectrum has been measured with the characteristic peak at 2 GeV. The search for cosmic-ray antihelium brought the upper-limit of the antihelium/helium ratio down to −6 . To extend the highly sensitive measurements, we are planning polar long duration flights in Antarctica focusing on the very low energy antiproton spectrum towards the solar-minimum in the next decade.

Achieving resonance in the Advanced LIGO gravitational-wave interferometer

Interferometric gravitational-wave detectors are complex instruments comprised of a Michelson interferometer enhanced by multiple coupled cavities. Active feedback control is required to operate these instruments and keep the cavities locked on resonance. The optical response is highly nonlinear until a good operating point is reached. The linear operating range is between 0.01% and 1% of a fringe for each degree of freedom. The resonance lock has to be achieved in all five degrees of freedom simultaneously, making the acquisition difficult. Furthermore, the cavity linewidth seen by the laser is only _(~1) Hz, which is four orders of magnitude smaller than the linewidth of the free running laser. The arm length stabilization system is a new technique used for arm cavity locking in Advanced LIGO. Together with a modulation technique utilizing third harmonics to lock the central Michelson interferometer, the Advanced LIGO detector has been successfully locked and brought to an operating point where detecting gravitational-waves becomes feasible.

Progress in Search for Antihelium with BESS

We have searched for antihelium nuclei in cosmic rays using the data obtained from balloon flights of the BESS magnetic spectrometer. The search was mainly based on track-quality selection, followed by rigidity analysis, and on the time-of-flight and dE/dx measurements by the scintillation counter hodoscope. We analysed all the data collected during 1993–2000 with a common analysis procedure. No antihelium nuclei events were found in the energy range from 1 to 14 GV. In order to determine a new upper limit, we have simulated the loss in the air and in the instrument of He (He) using the GEANT/GHEISHA code. Combined with the data collected in 1993 through 2000, a new 95 % confidence upper limit for the ratio of He/He at the top of the atmosphere of 6.8 × 10−7 has been obtained to be after correcting for the interactions in the air and in the instruments.

Residual amplitude modulation in interferometric gravitational wave detectors

The effects of residual amplitude modulation (RAM) in laser interferometers using heterodyne sensing can be substantial and difficult to mitigate. In this work, we analyze the effects of RAM on a complex laser interferometer used for gravitational wave detection. The RAM introduces unwanted offsets in the cavity length signals and thereby shifts the operating point of the optical cavities from the nominal point via feedback control. This shift causes variations in the sensing matrix, and leads to degradation in the performance of the precision noise subtraction scheme of the multiple-degree-of-freedom control system. In addition, such detuned optical cavities produce an optomechanical spring, which also perturbs the sensing matrix. We use our simulations to derive requirements on RAM for the Advanced LIGO (aLIGO) detectors, and show that the RAM expected in aLIGO will not limit its sensitivity.

Calibration uncertainty for Advanced LIGO’s first and second observing runs

Calibration of the Advanced LIGO detectors is the quantification of the detectors’ response to gravitational waves. Gravitational waves incident on the detectors cause phase shifts in the interferometer laser light which are read out as intensity fluctuations at the detector output. Understanding this detector response to gravitational waves is crucial to producing accurate and precise gravitational wave strain data. Estimates of binary black hole and neutron star parameters and tests of general relativity require well-calibrated data, as miscalibrations will lead to biased results. We describe the method of producing calibration uncertainty estimates for both LIGO detectors in the first and second observing runs.

Multicolor cavity metrology

Long-baseline laser interferometers used for gravitational-wave detection have proven to be very complicated to control. In order to have sufficient sensitivity to astrophysical gravitational waves, a set of multiple coupled optical cavities comprising the interferometer must be brought into resonance with the laser field. A set of multi-input, multi-output servos then lock these cavities into place via feedback control. This procedure, known as lock acquisition, has proven to be a vexing problem and has reduced greatly the reliability and duty factor of the past generation of laser interferometers. In this article, we describe a technique for bringing the interferometer from an uncontrolled state into resonance by using harmonically related external fields to provide a deterministic hierarchical control. This technique reduces the effect of the external seismic disturbances by 4 orders of magnitude and promises to greatly enhance the stability and reliability of the current generation of gravitational-wave detectors. The possibility for using multicolor techniques to overcome current quantum and thermal noise limits is also discussed.