K. J. Moh

Generating radial or azimuthal polarization by axial sampling of circularly polarized vortex beams

A laser beam with circular polarization can be converted into either radial or azimuthal polarization by a microfabricated spiral phase plate and a radial (or azimuthal)-type linear analyzer. The resulting polarization is axially symmetric and is able to produce tightly focused light fields beyond the diffraction limit. We describe in detail the theory behind the technique and the experimental verification of the polarization both in the far field and at the focus of a high numerical aperture lens. Vector properties of the beam under strong focusing conditions were observed by comparing the fluorescence images corresponding to the focal intensity distribution for both radial and azimuthal polarizations. The technique discussed here may easily be implemented to a wide range of optical instruments and devices that require the use of tightly focused light beams.

Surface plasmon resonance imaging of cell-substrate contacts with radially polarized beams

We demonstrate the proof-of-concept for surface plasmon resonance sensing and imaging via a virtual probe at the cell-substrate interface of a biological cell in aqueous media. The technique is based on the optical excitation by focused radially polarized beams of localized surface plasmons, which forms a virtual probe on the metal substrate. The intensity distribution at the back focal plane of the objective lens enables quantitative measurements to be made of the cell-substrate contact. The acquired data is then visualized in the form of a local refractive index map.

Direct noninterference cylindrical vector beam generation applied in the femtosecond regime

This letter describes the generation of femtosecond cylindrical vector beams by passing the optical pulse through a microfabricated spiral phase plate and an azimuth-type polarization analyzer. The resulting beam resembles a doughnut and has a polarization that is axially symmetric. Portions of the wave front were sampled via the GRENOUILLE frequency resolved optical grating device; it was found that the original pulse of 200fs was stretched slightly by ∼13fs. Compared to an interferometric beam combination technique, this experiment geometry is simple, minimizes material dispersion, and has negligible spatial chirp.

Generation of femtosecond optical vortices using a single refractive optical element

It is shown experimentally for small spectral bandwidth that spiral phase plates (SPPs) can generate optical vortices in femtosecond beams without the need for additional dispersion compensation elements. An autocorrelation measurement performed on the obtained optical vortex (OV) beam showed that the SPP did not significantly change the pulse duration. Hence the single element SPP, already an established beam shaping technique in continuous wave and high power regimes, is presented as an efficient and practical means to obtain OVs that are free from spatial chirp in femtosecond beams.

High-power efficient multiple optical vortices in a single beam generated by a kinoform-type spiral phase plate

We propose using a solitary kinoform-type spiral phase plate structure to generate an array of vortices located in a single beam. Kinoform-type spiral surfaces allow each wavelength component of the phase modulation value to be wrapped back to its 2 pi equivalent for optical vortices of high charge. This allows the surface-relief profiles of high-charge vortices to be microfabricated with the same physical height as spiral phase plates of unity-charged optical vortices. The m-charged optical vortex obtained interacts with the inherent coherent background, which changes the propagation dynamics of the optical vortex and splits the initial m charge into /m/ unity-charged optical vortices within the same beam. Compared to a hologram, a multistart spiral phase plate is more efficient in the use of available spatial frequencies and beam energy and also is computationally less demanding. Furthermore, using microfabrication techniques will allow for greater achievable tolerances in terms of smaller feature sizes.

Surface plasmon-coupled emission from shaped PMMA films doped with fluorescence molecules

Surface plasmon-coupled emission from shaped PMMA films doped with randomly oriented fluorescence molecules was investigated. Experimental results show that for different shapes, such as triangle or circular structures, the SPCE ring displays different intensity patterns. For a given shape, it was observed that the relative position and polarization of an incident laser spot on the shaped PMMA can be used to adjust the fluorescence intensity distribution of the SPCE ring. The proposed method enables controlling the fluorescence emission in azimuthal direction in addition to the radial angle controlled by common SPCE, which will further enhances the fluorescence collection efficiency and has applications in fluorescence sensing, imaging and so on.

Monolithically integrated refractive microlens array to improve imaging quality of an infrared focal plane array

A simple reflow technique and reactive-ion etching are em- ployed to fabricate and integrate a refractive square-apertured arch Si microlens array (MLA) on the back of an IR focal plane array device (IRFPA), resulting in the formation of a monolithic MLA/IRFPA device. The fabricated on-chip Si MLA behaves as optical concentrators and is used to collect most of the incident light from each pixel area on a smaller photosensitive area of the IRFPA, causing the IR response char- acteristics of the monolithic device to be improved greatly when com- pared with an ordinary IRFPA device without the MLA. The advantages of employing the reflow technique and the reactive-ion etching lie not only in the excellent surface smoothness and dimensional uniformity of the fabricated MLA, but also as a cost-effective and mass production technology.

Experimental transfer of torque induced by localized polarization of radially polarized vector beams to anisotropic microparticles

Polarization-induced torque of a radially polarized beam is investigated on anisotropic micro-particles. Radially polarized beams possess full cylindrical symmetry; therefore, any line drawn from the beam axis to the circumference contains identical polarization vectors, acting locally as linearly polarized. It is experimentally observed that anisotropic microparticles experience an aligning torque by the localized segment of the radially polarized beam, setting it to rotate around the beam axis. The rotation of the particle thus enables the mapping of the localized electric vector distribution of radially polarized beams.

Reflowed solgel spherical microlens for high-efficiency optical coupling between a laser diode and a single-mode fiber.

To improve the coupling efficiency between a laser diode and a single-mode fiber, we propose a two-microlens coupling scheme that uses two solgel spherical microlenses for high coupling efficiency. The conventional reflow technique was employed and extended to the inorganic-organic hybrid SiO2/ZrO2 solgel material to form the microlenses. Preliminary results show that the coupling efficiency was increased to--1.28 dB (74.5%) by the proposed scheme, compared with a coupling efficiency of--10.13 dB (9.7%) by the butt-joint method. The proposed fabrication technique demonstrates that use of a reflowed solgel spherical microlens is a cost-effective mass-production approach to application of micro-optical elements in optical communication.

Micro-optical elements for optical manipulation

Using micro-optical elements can be an effective, low-cost way to shape laser micro-beams, which are needed for optical trapping and manipulation. This article covers various designs of micro-optical elements that are used to generate the necessary optical vortices within a beam.