K. R. Justin Thomas

Dipolar compounds containing fluorene and a heteroaromatic ring as the conjugating bridge for high-performance dye-sensitized solar cells.

A novel series of dipolar organic dyes containing diarylamine as the electron donor, 2-cyanoacrylic acid as the electron acceptor, and fluorene and a heteroaromatic ring as the conjugating bridge have been developed and characterized. These metal-free dyes exhibited very high molar extinction coefficients in the electronic absorption spectra and have been successfully fabricated as efficient nanocrystalline TiO(2) dye-sensitized solar cells (DSSCs). The solar-energy-to-electricity conversion efficiencies of DSSCs ranged from 4.92 to 6.88%, which reached 68-96% of a standard device of N719 fabricated and measured under the same conditions. With a TiO(2) film thickness of 6 microm, DSSCs based on these dyes had photocurrents surpassing that of the N719-based device. DFT computation results on these dyes also provide detailed structural information in connection with their high cell performance.

Organic dyes containing carbazole as donor and π-linker: optical, electrochemical, and photovoltaic properties.

A series of new metal free organic dyes containing carbazole as donor and π-linker have been synthesized and characterized as effective sensitizers for dye sensitized solar cells (DSSCs). The carbazole functionalized at C-2 and C-7 served as electron-rich bridge. The donor property of the carbazole is substantially enhanced on introduction of tert-butyl groups at C-3 and C-6 positions and the oxidation propensity of the dyes increased on insertion of thiophene unit in the conjugation pathway. These structural modifications fine-tuned the optical and electrochemical properties of the dyes. Additionally, the presence of tert-butyl groups on the carbazole nucleus minimized the intermolecular interactions which benefited the performance of DSSCs. The dyes served as efficient sensitizers in DSSCs owing to their promising optical and electrochemical properties. The efficiency of DSSCs utilizing these dyes as sensitizers ranged from 4.22 to 6.04%. The tert-butyl groups were found to suppress the recombination of injected electrons which contributed to the increment in the photocurrent generation (JSC) and open circuit voltage (VOC). A dye with carbazole donor functionalized with tert-butyl groups and the conjugation bridge composed of 2,7-disubstituted carbazole and thiophene fragments exhibited higher VOC value. However, the best device efficiency was observed for a dye with unsubstituted carbazole donor and the π-linker featuring carbazole and bithiophene units due to the high photocurrent generation arising from the facile injection of photogenerated electrons into the conduction band of titanium dioxide (TiO2) facilitated by the low-lying LUMO.

2,7-Diaminofluorene-Based Organic Dyes for Dye-Sensitized Solar Cells: Effect of Auxiliary Donor on Optical and Electrochemical Properties

New organic dyes containing a diarylaminofluorene unit as an electron donor and cyanoacrylic acid as acceptor and anchoring group in a donor-π-donor-π-acceptor architecture have been synthesized and characterized as sensitizers for nanocrystalline TiO(2)-based dye-sensitized solar cells. They have shown three major electronic absorptions originating from the π-π* and charge-transfer transitions covering the broad visible range (250-550 nm) in solution. The charge-transfer transition of the dyes exhibited negative solvatochromism, suggesting a polarized ground state. They have also displayed acidochromism in solution owing to the presence of a protonation-deprotonation equilibrium. On comparison with the triphenylamine and carbazole-based parent dyes (E)-2-cyano-3-(4-(diphenylamino)phenyl)acrylic acid and (E)-2-cyano-3-(9-ethyl-9H-carbazol-3-yl)acrylic acid they exhibited longer wavelength absorptions and facile oxidation, indicating the stronger electron-donating ability of the auxiliary chromophores. In addition, they exhibited nearly two times larger light-to-electron conversion efficiency under simulated AM 1.5 G irradiation (100 mW cm(-2)) with an aperture mask when compared to the parent dyes. Among the new dyes, the one containing the naphthylphenylamine segment showed better device characteristics attributable to the higher HOMO energy level which probably facilitates the regeneration of the dye and effective suppression of the back reaction of the injected electrons with the I(3)(-) in the electrolyte. The optical properties of the dyes were modeled using TDDFT simulations employing different theoretical models (B3LYP, CAM-B3LYP, and MPW1K), and the best correlations with the observed parameters have been found for CAM-B3LYP and MPW1K calculations. The electron lifetimes extracted from the electrochemical impedance measurements of the dye-sensitized solar cells were used to interpret the solar cell efficiency alternations.

Hexaphenylphenylene dendronised pyrenylamines for efficient organic light-emitting diodes

A series of blue-emitting triarylamines containing pyrene and hexaphenylbenzene dendrons were successfully synthesized by employing the Diels–Alder and palladium catalyzed C–N coupling reactions. They display high glass transition temperatures (>140 °C) in differential scanning calorimetry and facile reversible oxidation couple in cyclic voltammetry. They are also thermally stable exhibiting decomposition temperature above 385 °C. Efficient blue-emitting electroluminescent devices were fabricated using these novel amines as the hole transporting layer and 1,3,5-tris(N-phenylbenzimidazol-2-yl)benzene (TPBI) as the electron transporting layer. Colour mixing or green emission was observed when tris(8-hydroxyquinoline)aluminium (Alq3) was used as the electron transporting layer. However insertion of a thin layer of TPBI or 1,3,5-tris(4-tert-butylphenyl-1,3,4-oxadiazolyl)benzene (TPOB) in between the HTL and Alq3 layers led to pure blue emission owing to the confinement of recombination inside the HTL layer containing the compounds.

Novel Pyrenoimidazole-Based Organic Dyes for Dye-Sensitized Solar Cells

A novel class of organic dyes containing pyrenoimidazole donors, cyanoacrylic acid acceptors, and oligothiophene π-linkers has been synthesized and characterized. The electro-optical properties of these dyes can be tuned by changing the conjugation length of the π-linkers. A dye containing terthiophene in the conjugation pathway exhibited a solar energy-to-electricity conversion efficiency of 5.65%.

Synthesis, spectroscopy and structure of new push–pull ferrocene complexes containing heteroaromatic rings (thiophene and furan) in the conjugation chain

Abstract Six new ferrocene based donor acceptor complexes containing thiophene and furan in the conjugation chain have been synthesized by conventional methods and characterized by NMR, electronic absorption spectral and electrochemical methods. X-ray single crystal structures of three thiophene derivatives, [(C5H5)–Fe–(C5H4CHCH–C4H3S)] (la), [(C5H5)–Fe–(C5H4–CHCH–C4H2S–CHO)] (2a) and [(C5H5)–Fe(C5H4–CHCH–C4H2S–CHC(CN)2)] (3a) have also been determined. Electronic absorption spectral and electrochemical studies suggest that π-donor acceptor interactions are facile in thiophene derivatives when compared to their benzene analogues.

Synthesis and Optical Properties of Acidochromic Amine-Substituted Benzo[a]phenazines

A new series of alkylamine- or arylamine-substituted benzo[a]phenazines have been synthesized from 1,2-naphthoquinones by employing simple sequential Michael-type addition with a variety of primary and secondary amines and the condensation reaction of the resulting amine-substituted 1,2-naphthoquinones with o-phenylenediamine. They exhibited absorption peaks originating from the charge transfer transition between the amine and pyrazine segments and benzo[a]phenazine localized π-π* transitions. Although the absorption spectra of the dyes were not significantly influenced by the nature of the solvents, addition of TFA led to a prominent red-shift in the absorption spectra owing to the protonation at the quinoxaline segment which enhanced the electron-accepting ability. The qualitative trends observed in the optical properties and acidochromism were supported by density functional theoretical computations. The dyes displayed positive solvatochromism in the emission spectra suggestive of a more polar excited state. The dyes were also characterized by a quasi-reversible reduction couple originating from the pyrazine segment which underwent shifts corresponding to electron-donating strength of the amine segment.

Organic dyes containing thienylfluorene conjugation for solar cells

New organic dyes that contain variable lengths of conjugation featuring alternating thiophene and fluorene segments have been synthesized and efficient nano-crystalline TiO2 based dye-sensitized solar cells were fabricated using these molecules as light-harvesting sensitizers.

Organic Dyes Containing Fluorene Decorated with Imidazole Units for Dye-Sensitized Solar Cells

New organic dyes containing fluorene functionalized with two imidazole chromophores as donors and cyanoacrylic acid acceptors have been synthesized and successfully demonstrated as sensitizers in nanocrystalline TiO2-based dye-sensitized solar cells (DSSCs). The monoimidazole analogues were also synthesized for comparison. The Sommelet reaction of bromomethylated 2-bromo-9,9-diethyl-9H-fluorene produced the key precursor 7-bromo-9,9-diethyl-9H-fluorene-2,4-dicarbaldehyde required for the preparation of imidazole-functionalized fluorenes. Since the dyes possess weak donor segment, the electron-richness of the conjugation pathway dictated the optical, electrochemical, and photovoltaic properties of the dyes. The dyes served as sensitizers in DSSC and exhibited moderate efficiency up to 3.44%. The additional imidazole present on the fluorene has been found to retard the electron recombination due to the bulkier hydrophobic environment and led to high open-circuit voltage in the devices.

Fluorene-Based Sensitizers with a Phenothiazine Donor: Effect of Mode of Donor Tethering on the Performance of Dye-Sensitized Solar Cells

Two types of fluorene-based organic dyes featuring T-shape/rod-shape molecular configuration with phenothiazine donor and cyanoacrylic acid acceptor have been synthesized and characterized as sensitizers for dye-sensitized solar cells. Phenothiazine is functionalized at either nitrogen (N10) or carbon (C3) to obtain T-shape and rod-like organic dyes, respectively. The effect of structural alternation on the optical, electrochemical, and the photovoltaic properties is investigated. The crystal structure determination of the dye containing phenyl linker revealed cofacial slip-stack columnar packing of the molecules. The trends in the optical properties of the dyes are interpreted using time-dependent density functional theory (TDDFT) computations. The rod-shaped dyes exhibited longer wavelength absorption and low oxidation potentials when compared to the corresponding T-shaped dyes attributable to the favorable electronic overlap between the phenothiazine unit and the rest of the molecule in the former dyes. However, the T-shaped dyes showed better photovoltaic properties due to the lowest unoccupied molecular orbital (LUMO) energy level favorable for electron injection into the conduction band of TiO2 and appropriate orientation of the phenothiazine unit rendering effective surface blocking to suppress the recombination of electrons between the electrolyte I3(-) and TiO2. The electrochemical impedance spectroscopy investigations provide further support for the variations in the electron injection and transfer kinetics due to the structural modifications.